| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20241202102235.9701-1-olaf@aepfle.de>
Date: Mon, 2 Dec 2024 11:19:55 +0100
From: Olaf Hering <olaf@...fle.de>
To: linux-hyperv@...r.kernel.org,
linux-kernel@...r.kernel.org
Cc: "K. Y. Srinivasan" <kys@...rosoft.com>,
Haiyang Zhang <haiyangz@...rosoft.com>,
Wei Liu <wei.liu@...nel.org>,
Dexuan Cui <decui@...rosoft.com>
Subject: [PATCH v1] tools/hv: update route parsing in kvp daemon
After recent changes in the VM network stack, the host fails to
display the IP addresses of the VM. As a result the "IP Addresses"
column in the "Networking" tab in the Windows Hyper-V Manager is
empty. This is caused by a change in the expected output of the
"ip route show" command. Previously the gateway address was shown
in the third row. Now the gateway addresses might be split into
several lines of output. As a result, the string "ra" instead of
an IP address is sent to the host.
To me more specific, a VM with the wellknown wicked network
managing tool still shows the expected output in recent openSUSE
Tumbleweed snapshots:
ip a show dev uplink;ip -4 route show;ip -6 route show
2: uplink: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state ...
link/ether 00:15:5d:d0:93:08 brd ff:ff:ff:ff:ff:ff
inet 1.2.3.4/22 brd 1.2.3.255 scope global uplink
valid_lft forever preferred_lft forever
inet6 fe80::215:5dff:fed0:9308/64 scope link proto kernel_ll
valid_lft forever preferred_lft forever
default via 1.2.3.254 dev uplink proto dhcp
1.2.3.0/22 dev uplink proto kernel scope link src 1.2.3.4
fe80::/64 dev uplink proto kernel metric 256 pref medium
default via fe80::26fc:4e00:3b:74 dev uplink proto ra metric 1024 exp...
default via fe80::6a22:8e00:fb:14f8 dev uplink proto ra metric 1024 e...
A similar VM, but with NetworkManager as network managing tool:
ip a show dev eth0;ip -4 route show;ip -6 route show
2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP...
link/ether 00:15:5d:d0:93:0b brd ff:ff:ff:ff:ff:ff
inet 1.2.3.8/22 brd 1.2.3.255 scope global dynamic noprefixroute ...
valid_lft 1022sec preferred_lft 1022sec
inet6 fe80::215:5dff:fed0:930b/64 scope link noprefixroute
valid_lft forever preferred_lft forever
default via 1.2.3.254 dev eth0 proto dhcp src 1.2.3.8 metric 100
1.2.3.0/22 dev eth0 proto kernel scope link src 1.2.3.8 metric 100
fe80::/64 dev eth0 proto kernel metric 1024 pref medium
default proto ra metric 20100 pref medium
nexthop via fe80::6a22:8e00:fb:14f8 dev eth0 weight 1
nexthop via fe80::26fc:4e00:3b:74 dev eth0 weight 1
Adjust the route parsing to use a single line for each line of
output. Also use a single shell invocation to retrieve both IPv4
and IPv6 information. The actual IP addresses are expected after
the "via" keyword.
Signed-off-by: Olaf Hering <olaf@...fle.de>
---
tools/hv/hv_kvp_daemon.c | 108 ++++++++++++++++++++++++++++++---------
1 file changed, 84 insertions(+), 24 deletions(-)
diff --git a/tools/hv/hv_kvp_daemon.c b/tools/hv/hv_kvp_daemon.c
index ae57bf69ad4a..63b44b191320 100644
--- a/tools/hv/hv_kvp_daemon.c
+++ b/tools/hv/hv_kvp_daemon.c
@@ -24,6 +24,7 @@
#include <sys/poll.h>
#include <sys/utsname.h>
+#include <stdbool.h>
#include <stdio.h>
#include <stdlib.h>
#include <unistd.h>
@@ -677,6 +678,88 @@ static void kvp_process_ipconfig_file(char *cmd,
pclose(file);
}
+static bool kvp_verify_ip_address(const void *address_string)
+{
+ char verify_buf[sizeof(struct in6_addr)];
+
+ if (inet_pton(AF_INET, address_string, verify_buf) == 1)
+ return true;
+ if (inet_pton(AF_INET6, address_string, verify_buf) == 1)
+ return true;
+ return false;
+}
+
+static void kvp_extract_routes(const char *line, void **output, size_t *remaining)
+{
+ static const char needle[] = "via ";
+ const char *match, *haystack = line;
+
+ while ((match = strstr(haystack, needle))) {
+ const char *address, *next_char;
+
+ /* Address starts after needle. */
+ address = match + strlen(needle);
+
+ /* The char following address is a space or end of line. */
+ next_char = strpbrk(address, " \t\\");
+ if (!next_char)
+ next_char = address + strlen(address) + 1;
+
+ /* Enough room for address and semicolon. */
+ if (*remaining >= (next_char - address) + 1) {
+ memcpy(*output, address, next_char - address);
+ /* Terminate string for verification. */
+ memcpy(*output + (next_char - address), "", 1);
+ if (kvp_verify_ip_address(*output)) {
+ /* Advance output buffer. */
+ *output += next_char - address;
+ *remaining -= next_char - address;
+
+ /* Each address needs a trailing semicolon. */
+ memcpy(*output, ";", 1);
+ *output += 1;
+ *remaining -= 1;
+ }
+ }
+ haystack = next_char;
+ }
+}
+
+static void kvp_get_gateway(void *buffer, size_t buffer_len)
+{
+ static const char needle[] = "default ";
+ FILE *f;
+ void *output = buffer;
+ char *line = NULL;
+ size_t alloc_size = 0, remaining = buffer_len - 1;
+ ssize_t num_chars;
+
+ /* Show route information in a single line, for each address family */
+ f = popen("ip --oneline -4 route show;ip --oneline -6 route show", "r");
+ if (!f) {
+ /* Convert buffer into C-String. */
+ memcpy(output, "", 1);
+ return;
+ }
+ while ((num_chars = getline(&line, &alloc_size, f)) > 0) {
+ /* Skip short lines. */
+ if (num_chars <= strlen(needle))
+ continue;
+ /* Skip lines without default route. */
+ if (memcmp(line, needle, strlen(needle)))
+ continue;
+ /* Remove trailing newline to simplify further parsing. */
+ if (line[num_chars - 1] == '\n')
+ line[num_chars - 1] = '\0';
+ /* Search routes after match. */
+ kvp_extract_routes(line + strlen(needle), &output, &remaining);
+ }
+ /* Convert buffer into C-String. */
+ memcpy(output, "", 1);
+ free(line);
+ pclose(f);
+}
+
static void kvp_get_ipconfig_info(char *if_name,
struct hv_kvp_ipaddr_value *buffer)
{
@@ -685,30 +768,7 @@ static void kvp_get_ipconfig_info(char *if_name,
char *p;
FILE *file;
- /*
- * Get the address of default gateway (ipv4).
- */
- sprintf(cmd, "%s %s", "ip route show dev", if_name);
- strcat(cmd, " | awk '/default/ {print $3 }'");
-
- /*
- * Execute the command to gather gateway info.
- */
- kvp_process_ipconfig_file(cmd, (char *)buffer->gate_way,
- (MAX_GATEWAY_SIZE * 2), INET_ADDRSTRLEN, 0);
-
- /*
- * Get the address of default gateway (ipv6).
- */
- sprintf(cmd, "%s %s", "ip -f inet6 route show dev", if_name);
- strcat(cmd, " | awk '/default/ {print $3 }'");
-
- /*
- * Execute the command to gather gateway info (ipv6).
- */
- kvp_process_ipconfig_file(cmd, (char *)buffer->gate_way,
- (MAX_GATEWAY_SIZE * 2), INET6_ADDRSTRLEN, 1);
-
+ kvp_get_gateway(buffer->gate_way, sizeof(buffer->gate_way));
/*
* Gather the DNS state.
Powered by blists - more mailing lists