linux-kernel - [PATCH v5 06/19] dt-bindings: display: imx: Add i.MX8qxp Display Controller command sequencer

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <20241202025635.1274467-7-victor.liu@nxp.com>
Date: Mon,  2 Dec 2024 10:56:22 +0800
From: Liu Ying <victor.liu@....com>
To: dri-devel@...ts.freedesktop.org,
	devicetree@...r.kernel.org,
	imx@...ts.linux.dev,
	linux-arm-kernel@...ts.infradead.org,
	linux-kernel@...r.kernel.org,
	linux-phy@...ts.infradead.org
Cc: p.zabel@...gutronix.de,
	maarten.lankhorst@...ux.intel.com,
	mripard@...nel.org,
	tzimmermann@...e.de,
	airlied@...il.com,
	simona@...ll.ch,
	robh@...nel.org,
	krzk+dt@...nel.org,
	conor+dt@...nel.org,
	shawnguo@...nel.org,
	s.hauer@...gutronix.de,
	kernel@...gutronix.de,
	festevam@...il.com,
	glx@...utronix.de,
	vkoul@...nel.org,
	kishon@...nel.org,
	aisheng.dong@....com,
	agx@...xcpu.org,
	francesco@...cini.it,
	frank.li@....com,
	dmitry.baryshkov@...aro.org,
	u.kleine-koenig@...libre.com
Subject: [PATCH v5 06/19] dt-bindings: display: imx: Add i.MX8qxp Display Controller command sequencer

i.MX8qxp Display Controller contains a command sequencer is designed to
autonomously process command lists.

Signed-off-by: Liu Ying <victor.liu@....com>
---
v5:
* No change.

v4:
* Replace "fsl,iram" property with standard "sram" property. (Rob)

v3:
* New patch. (Rob)

 .../imx/fsl,imx8qxp-dc-command-sequencer.yaml | 67 +++++++++++++++++++
 1 file changed, 67 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/display/imx/fsl,imx8qxp-dc-command-sequencer.yaml

diff --git a/Documentation/devicetree/bindings/display/imx/fsl,imx8qxp-dc-command-sequencer.yaml b/Documentation/devicetree/bindings/display/imx/fsl,imx8qxp-dc-command-sequencer.yaml
new file mode 100644
index 000000000000..27118f4c0d28
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/imx/fsl,imx8qxp-dc-command-sequencer.yaml
@@ -0,0 +1,67 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/imx/fsl,imx8qxp-dc-command-sequencer.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale i.MX8qxp Display Controller Command Sequencer
+
+description: |
+  The Command Sequencer is designed to autonomously process command lists.
+  By that it can load setups into the DC configuration and synchronize to
+  hardware events.  This releases a system's CPU from workload, because it
+  does not need to wait for certain events.  Also it simplifies SW architecture,
+  because no interrupt handlers are required.  Setups are read via AXI bus,
+  while write access to configuration registers occurs directly via an internal
+  bus.  This saves bandwidth for the AXI interconnect and improves the system
+  architecture in terms of safety aspects.
+
+maintainers:
+  - Liu Ying <victor.liu@....com>
+
+properties:
+  compatible:
+    const: fsl,imx8qxp-dc-command-sequencer
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 5
+
+  interrupt-names:
+    items:
+      - const: error
+      - const: sw0
+      - const: sw1
+      - const: sw2
+      - const: sw3
+
+  sram:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description: phandle pointing to the mmio-sram device node
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - interrupts
+  - interrupt-names
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/imx8-lpcg.h>
+
+    command-sequencer@...80400 {
+        compatible = "fsl,imx8qxp-dc-command-sequencer";
+        reg = <0x56180400 0x1a4>;
+        clocks = <&dc0_lpcg IMX_LPCG_CLK_5>;
+        interrupt-parent = <&dc0_intc>;
+        interrupts = <36>, <37>, <38>, <39>, <40>;
+        interrupt-names = "error", "sw0", "sw1", "sw2", "sw3";
+    };
-- 
2.34.1