| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20241203044143.yptllspwjef3bya7@vireshk-i7>
Date: Tue, 3 Dec 2024 10:11:43 +0530
From: Viresh Kumar <viresh.kumar@...aro.org>
To: Christian Marangi <ansuelsmth@...il.com>, ulf.hansson@...aro.org
Cc: "Rafael J. Wysocki" <rafael@...nel.org>, Rob Herring <robh@...nel.org>,
Krzysztof Kozlowski <krzk+dt@...nel.org>,
Conor Dooley <conor+dt@...nel.org>, linux-pm@...r.kernel.org,
devicetree@...r.kernel.org, linux-kernel@...r.kernel.org,
upstream@...oha.com
Subject: Re: [PATCH v4 1/2] dt-bindings: cpufreq: Document support for Airoha
EN7581 CPUFreq
+Ulf,
On 02-12-24, 16:12, Christian Marangi wrote:
> Document required property for Airoha EN7581 CPUFreq .
>
> On newer Airoha SoC, CPU Frequency is scaled indirectly with SMCCC commands
> to ATF and no clocks are exposed to the OS.
>
> The SoC have performance state described by ID for each OPP, for this a
> Power Domain is used that sets the performance state ID according to the
> required OPPs defined in the CPU OPP tables.
>
> Signed-off-by: Christian Marangi <ansuelsmth@...il.com>
> ---
> Changes v4:
> - Add this patch
>
> .../cpufreq/airoha,en7581-cpufreq.yaml | 259 ++++++++++++++++++
> 1 file changed, 259 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/cpufreq/airoha,en7581-cpufreq.yaml
>
> diff --git a/Documentation/devicetree/bindings/cpufreq/airoha,en7581-cpufreq.yaml b/Documentation/devicetree/bindings/cpufreq/airoha,en7581-cpufreq.yaml
> new file mode 100644
> index 000000000000..a5bdea7f34b5
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/cpufreq/airoha,en7581-cpufreq.yaml
> @@ -0,0 +1,259 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/cpufreq/airoha,en7581-cpufreq.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Airoha EN7581 CPUFreq
> +
> +maintainers:
> + - Christian Marangi <ansuelsmth@...il.com>
> +
> +description: |
> + On newer Airoha SoC, CPU Frequency is scaled indirectly with SMCCC commands
> + to ATF and no clocks are exposed to the OS.
> +
> + The SoC have performance state described by ID for each OPP, for this a
> + Power Domain is used that sets the performance state ID according to the
> + required OPPs defined in the CPU OPP tables.
> +
> +properties:
> + compatible:
> + const: airoha,en7581-cpufreq
> +
> + '#clock-cells':
> + const: 0
> +
> + '#power-domain-cells':
> + const: 0
> +
> + operating-points-v2: true
> +
> +required:
> + - compatible
> + - '#clock-cells'
> + - '#power-domain-cells'
> + - operating-points-v2
> +
> +additionalProperties: false
> +
> +examples:
> + - |
> + / {
> + #address-cells = <2>;
> + #size-cells = <2>;
> +
> + cpus {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + cpu0: cpu@0 {
> + device_type = "cpu";
> + compatible = "arm,cortex-a53";
> + reg = <0x0>;
> + operating-points-v2 = <&cpu_opp_table>;
> + enable-method = "psci";
> + clocks = <&cpufreq>;
> + clock-names = "cpu";
> + power-domains = <&cpufreq>;
> + power-domain-names = "cpu_pd";
> + next-level-cache = <&l2>;
> + #cooling-cells = <2>;
> + };
> +
> + cpu1: cpu@1 {
> + device_type = "cpu";
> + compatible = "arm,cortex-a53";
> + reg = <0x1>;
> + operating-points-v2 = <&cpu_opp_table>;
> + enable-method = "psci";
> + clocks = <&cpufreq>;
> + clock-names = "cpu";
> + power-domains = <&cpufreq>;
> + power-domain-names = "cpu_pd";
> + next-level-cache = <&l2>;
> + #cooling-cells = <2>;
> + };
> +
> + cpu2: cpu@2 {
> + device_type = "cpu";
> + compatible = "arm,cortex-a53";
> + reg = <0x2>;
> + operating-points-v2 = <&cpu_opp_table>;
> + enable-method = "psci";
> + clocks = <&cpufreq>;
> + clock-names = "cpu";
> + power-domains = <&cpufreq>;
> + power-domain-names = "cpu_pd";
> + next-level-cache = <&l2>;
> + #cooling-cells = <2>;
> + };
> +
> + cpu3: cpu@3 {
> + device_type = "cpu";
> + compatible = "arm,cortex-a53";
> + reg = <0x3>;
> + operating-points-v2 = <&cpu_opp_table>;
> + enable-method = "psci";
> + clocks = <&cpufreq>;
> + clock-names = "cpu";
> + power-domains = <&cpufreq>;
> + power-domain-names = "cpu_pd";
> + next-level-cache = <&l2>;
> + #cooling-cells = <2>;
> + };
> + };
> +
> + cpu_opp_table: opp-table {
> + compatible = "operating-points-v2";
> + opp-shared;
> +
> + opp-500000000 {
> + opp-hz = /bits/ 64 <500000000>;
> + required-opps = <&smcc_opp0>;
In your case I think you can simply mention opp-level here itself and remove the
OPP table for the genpd. Right Ulf ?
> + };
> +
> + opp-550000000 {
> + opp-hz = /bits/ 64 <550000000>;
> + required-opps = <&smcc_opp1>;
> + };
> +
> + opp-600000000 {
> + opp-hz = /bits/ 64 <600000000>;
> + required-opps = <&smcc_opp2>;
> + };
> +
> + opp-650000000 {
> + opp-hz = /bits/ 64 <650000000>;
> + required-opps = <&smcc_opp3>;
> + };
> +
> + opp-7000000000 {
> + opp-hz = /bits/ 64 <700000000>;
> + required-opps = <&smcc_opp4>;
> + };
> +
> + opp-7500000000 {
> + opp-hz = /bits/ 64 <750000000>;
> + required-opps = <&smcc_opp5>;
> + };
> +
> + opp-8000000000 {
> + opp-hz = /bits/ 64 <800000000>;
> + required-opps = <&smcc_opp6>;
> + };
> +
> + opp-8500000000 {
> + opp-hz = /bits/ 64 <850000000>;
> + required-opps = <&smcc_opp7>;
> + };
> +
> + opp-9000000000 {
> + opp-hz = /bits/ 64 <900000000>;
> + required-opps = <&smcc_opp8>;
> + };
> +
> + opp-9500000000 {
> + opp-hz = /bits/ 64 <950000000>;
> + required-opps = <&smcc_opp9>;
> + };
> +
> + opp-10000000000 {
> + opp-hz = /bits/ 64 <1000000000>;
> + required-opps = <&smcc_opp10>;
> + };
> +
> + opp-10500000000 {
> + opp-hz = /bits/ 64 <1050000000>;
> + required-opps = <&smcc_opp11>;
> + };
> +
> + opp-11000000000 {
> + opp-hz = /bits/ 64 <1100000000>;
> + required-opps = <&smcc_opp12>;
> + };
> +
> + opp-11500000000 {
> + opp-hz = /bits/ 64 <1150000000>;
> + required-opps = <&smcc_opp13>;
> + };
> +
> + opp-12000000000 {
> + opp-hz = /bits/ 64 <1200000000>;
> + required-opps = <&smcc_opp14>;
> + };
> + };
> +
> + cpu_smcc_opp_table: opp-table-cpu-smcc {
So this won't be required I guess.
> + compatible = "operating-points-v2";
> +
> + smcc_opp0: opp0 {
> + opp-level = <0>;
> + };
> +
> + smcc_opp1: opp1 {
> + opp-level = <1>;
> + };
> +
> + smcc_opp2: opp2 {
> + opp-level = <2>;
> + };
> +
> + smcc_opp3: opp3 {
> + opp-level = <3>;
> + };
> +
> + smcc_opp4: opp4 {
> + opp-level = <4>;
> + };
> +
> + smcc_opp5: opp5 {
> + opp-level = <5>;
> + };
> +
> + smcc_opp6: opp6 {
> + opp-level = <6>;
> + };
> +
> + smcc_opp7: opp7 {
> + opp-level = <7>;
> + };
> +
> + smcc_opp8: opp8 {
> + opp-level = <8>;
> + };
> +
> + smcc_opp9: opp9 {
> + opp-level = <9>;
> + };
> +
> + smcc_opp10: opp10 {
> + opp-level = <10>;
> + };
> +
> + smcc_opp11: opp11 {
> + opp-level = <11>;
> + };
> +
> + smcc_opp12: opp12 {
> + opp-level = <12>;
> + };
> +
> + smcc_opp13: opp13 {
> + opp-level = <13>;
> + };
> +
> + smcc_opp14: opp14 {
> + opp-level = <14>;
> + };
> + };
> +
> + cpufreq: cpufreq {
And I would name it like a genpd, instead of cpufreq. But I am not sure what's
the right name is..
> + compatible = "airoha,en7581-cpufreq";
> +
> + operating-points-v2 = <&cpu_smcc_opp_table>;
> +
> + #power-domain-cells = <0>;
> + #clock-cells = <0>;
> + };
> + };
> --
> 2.45.2
--
viresh
Powered by blists - more mailing lists