linux-kernel - Re: [PATCH v1 1/7] dt-bindings: i2c: qcom,i2c-geni: Document DT properties for QUP firmware loading

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <garuc5au5464xpmj3exlull4o2763xrkqubplde56xmyfhfhmn@cpd4bbt4dfyr>
Date: Thu, 5 Dec 2024 00:36:14 +0200
From: Dmitry Baryshkov <dmitry.baryshkov@...aro.org>
To: Viken Dadhaniya <quic_vdadhani@...cinc.com>
Cc: andi.shyti@...nel.org, robh@...nel.org, krzk+dt@...nel.org, 
	conor+dt@...nel.org, gregkh@...uxfoundation.org, jirislaby@...nel.org, 
	broonie@...nel.or, andersson@...nel.org, konradybcio@...nel.org, 
	johan+linaro@...nel.org, dianders@...omium.org, agross@...nel.org, 
	linux-arm-msm@...r.kernel.org, linux-i2c@...r.kernel.org, devicetree@...r.kernel.org, 
	linux-kernel@...r.kernel.org, linux-serial@...r.kernel.org, linux-spi@...r.kernel.org, 
	=quic_msavaliy@...cinc.com, quic_anupkulk@...cinc.com, 
	Mukesh Kumar Savaliya <quic_msavaliy@...cinc.com>
Subject: Re: [PATCH v1 1/7] dt-bindings: i2c: qcom,i2c-geni: Document DT
 properties for QUP firmware loading

On Wed, Dec 04, 2024 at 08:33:20PM +0530, Viken Dadhaniya wrote:
> Document the 'qcom,load-firmware' and 'qcom,xfer-mode' properties to
> support SE(Serial Engine) firmware loading from the protocol driver and to
> select the data transfer mode, either GPI DMA (Generic Packet Interface)
> or non-GPI mode (PIO/CPU DMA).
> 
> I2C controller can operate in one of two modes based on the
> 'qcom,xfer-mode' property, and the firmware is loaded accordingly.
> 
> Co-developed-by: Mukesh Kumar Savaliya <quic_msavaliy@...cinc.com>
> Signed-off-by: Mukesh Kumar Savaliya <quic_msavaliy@...cinc.com>
> Signed-off-by: Viken Dadhaniya <quic_vdadhani@...cinc.com>
> ---
>  .../devicetree/bindings/i2c/qcom,i2c-geni-qcom.yaml   | 11 +++++++++++
>  1 file changed, 11 insertions(+)
> 
> diff --git a/Documentation/devicetree/bindings/i2c/qcom,i2c-geni-qcom.yaml b/Documentation/devicetree/bindings/i2c/qcom,i2c-geni-qcom.yaml
> index 9f66a3bb1f80..a26f34fce1bb 100644
> --- a/Documentation/devicetree/bindings/i2c/qcom,i2c-geni-qcom.yaml
> +++ b/Documentation/devicetree/bindings/i2c/qcom,i2c-geni-qcom.yaml
> @@ -66,6 +66,15 @@ properties:
>    required-opps:
>      maxItems: 1
>  
> +  qcom,load-firmware:
> +    type: boolean
> +    description: Optional property to load SE (serial engine) Firmware from protocol driver.
> +
> +  qcom,xfer-mode:
> +    description: Value 1,2 and 3 represents FIFO, CPU DMA and GSI DMA mode respectively.
> +    $ref: /schemas/types.yaml#/definitions/uint32
> +    enum: [1, 2, 3]
> +
>  required:
>    - compatible
>    - interrupts
> @@ -142,5 +151,7 @@ examples:
>          interconnect-names = "qup-core", "qup-config", "qup-memory";
>          power-domains = <&rpmhpd SC7180_CX>;
>          required-opps = <&rpmhpd_opp_low_svs>;
> +        qcom,load-firmware;

please use instead:
firmware-name = "qcom/sc7180/qupv3.elf"

> +        qcom,xfer-mode = <1>;
>      };
>  ...
> -- 
> 2.34.1
> 

-- 
With best wishes
Dmitry