[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20241204113329.3195627-7-quic_varada@quicinc.com>
Date: Wed, 4 Dec 2024 17:03:29 +0530
From: Varadarajan Narayanan <quic_varada@...cinc.com>
To: <lpieralisi@...nel.org>, <kw@...ux.com>,
<manivannan.sadhasivam@...aro.org>, <robh@...nel.org>,
<bhelgaas@...gle.com>, <krzk+dt@...nel.org>, <conor+dt@...nel.org>,
<vkoul@...nel.org>, <kishon@...nel.org>, <andersson@...nel.org>,
<konradybcio@...nel.org>, <p.zabel@...gutronix.de>,
<quic_nsekar@...cinc.com>, <dmitry.baryshkov@...aro.org>,
<quic_varada@...cinc.com>, <linux-arm-msm@...r.kernel.org>,
<linux-pci@...r.kernel.org>, <devicetree@...r.kernel.org>,
<linux-kernel@...r.kernel.org>, <linux-phy@...ts.infradead.org>
CC: Praveenkumar I <quic_ipkumar@...cinc.com>
Subject: [PATCH v2 6/6] arm64: dts: qcom: ipq5332: Enable PCIe phys and controllers
From: Praveenkumar I <quic_ipkumar@...cinc.com>
Enable the PCIe controller and PHY nodes for RDP 441.
Signed-off-by: Praveenkumar I <quic_ipkumar@...cinc.com>
Signed-off-by: Varadarajan Narayanan <quic_varada@...cinc.com>
---
arch/arm64/boot/dts/qcom/ipq5332-rdp441.dts | 74 +++++++++++++++++++++
1 file changed, 74 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/ipq5332-rdp441.dts b/arch/arm64/boot/dts/qcom/ipq5332-rdp441.dts
index 846413817e9a..83eca8435cff 100644
--- a/arch/arm64/boot/dts/qcom/ipq5332-rdp441.dts
+++ b/arch/arm64/boot/dts/qcom/ipq5332-rdp441.dts
@@ -62,4 +62,78 @@ data-pins {
bias-pull-up;
};
};
+
+ pcie0_default: pcie0-default-state {
+ clkreq-n-pins {
+ pins = "gpio37";
+ function = "pcie0_clk";
+ drive-strength = <8>;
+ bias-pull-up;
+ };
+
+ perst-n-pins {
+ pins = "gpio38";
+ function = "gpio";
+ drive-strength = <8>;
+ bias-pull-up;
+ output-low;
+ };
+
+ wake-n-pins {
+ pins = "gpio39";
+ function = "pcie0_wake";
+ drive-strength = <8>;
+ bias-pull-up;
+ };
+ };
+
+ pcie1_default: pcie1-default-state {
+ clkreq-n-pins {
+ pins = "gpio46";
+ function = "pcie1_clk";
+ drive-strength = <8>;
+ bias-pull-up;
+ };
+
+ perst-n-pins {
+ pins = "gpio47";
+ function = "gpio";
+ drive-strength = <8>;
+ bias-pull-up;
+ output-low;
+ };
+
+ wake-n-pins {
+ pins = "gpio48";
+ function = "pcie1_wake";
+ drive-strength = <8>;
+ bias-pull-up;
+ };
+ };
+};
+
+&pcie0_phy {
+ status = "okay";
+};
+
+&pcie0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pcie0_default>;
+
+ perst-gpios = <&tlmm 38 GPIO_ACTIVE_LOW>;
+ wake-gpios = <&tlmm 39 GPIO_ACTIVE_LOW>;
+ status = "okay";
+};
+
+&pcie1_phy {
+ status = "okay";
+};
+
+&pcie1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pcie1_default>;
+
+ perst-gpios = <&tlmm 47 GPIO_ACTIVE_LOW>;
+ wake-gpios = <&tlmm 48 GPIO_ACTIVE_LOW>;
+ status = "okay";
};
--
2.34.1
Powered by blists - more mailing lists