[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-Id: <20241204-asus_qcom_display-v6-0-91079cd8234e@hotmail.com>
Date: Wed, 04 Dec 2024 13:26:36 +0100
From: Maud Spierings via B4 Relay <devnull+maud_spierings.hotmail.com@...nel.org>
To: Bjorn Andersson <andersson@...nel.org>,
Konrad Dybcio <konradybcio@...nel.org>, Rob Herring <robh@...nel.org>,
Krzysztof Kozlowski <krzk+dt@...nel.org>,
Conor Dooley <conor+dt@...nel.org>, Johan Hovold <johan@...nel.org>
Cc: linux-arm-msm@...r.kernel.org, devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org,
Konrad Dybcio <konrad.dybcio@....qualcomm.com>,
Maud Spierings <maud_spierings@...mail.com>,
Dmitry Baryshkov <dmitry.baryshkov@...aro.org>
Subject: [PATCH v6 0/3] Asus vivobook s15 improvements
Improves several parts of the devicetree:
1. The eDP panel bindings
2. Add a lid switch
3. Add bluetooth and describe wlan (depends on [1])
A big part of the bluetooth/wifi patch was copied from [1] as it is
mostly boiler plate regulator definitions
[1]: https://lore.kernel.org/all/20241007-x1e80100-pwrseq-qcp-v1-0-f7166510ab17@linaro.org/
---
I seem to get a warning that the pci17cb vendor is undocumented (wlan)
I can find this compatible in
Documentation/devicetree/bindings/net/wireless/qcom,ath12k.yaml
But pci17cb doesn't really seem like a vendor name to me, I have ignored
this warning for now.
Changes in v6:
- Use the proper define for the pmic-gpio drive-strength in the panel
driver patch
- Add a comment about the voltage to the pmic-gpio power-source in the
panel driver patch
- Remove the alias for the not (yet) existing debug uart in the bt/wifi
patch
- Remove output-low from the bt_en gpio in the bt/wifi patch
- Add wcn- prefix to the bt-en and wlan-en gpio node names in the
bt/wifi patch
- Link to v5: https://lore.kernel.org/r/20241202-asus_qcom_display-v5-0-e0d3752ff71f@hotmail.com
Changes in v5:
- Fix the pinctrl-# definition in the wcn7850-pmu node in the
bluetooth/wifi patch
- Link to v4: https://lore.kernel.org/r/20241125-asus_qcom_display-v4-0-61a4da162406@hotmail.com
Changes in v4:
- Fixed the pin parameters for the backlight enable pin
- Fixed the wcn_sw_en drive-strength, this was not in the acpi table I
checked.
- Fixed the ordering of several nodes in the bluetooth/wifi patch
- Link to v3: https://lore.kernel.org/r/20241124-asus_qcom_display-v3-0-002b723b1920@hotmail.com
Changes in v3:
- Fixed commit message formatting (line wrapping)
- Fixed bad indentation (lid switch pinctrl)
- Fixed bluetooth addition and added wifi description
- Link to v2: https://lore.kernel.org/r/20241123-asus_qcom_display-v2-0-a0bff8576024@hotmail.com
Changes in v2:
- Add missing gpiokeys include in the lid switch patch
- Add depends on for the bluetooth patch
- Link to v1: https://lore.kernel.org/r/20241123-asus_qcom_display-v1-0-85a9ff9240aa@hotmail.com
---
Maud Spierings (3):
arm64: dts: qcom: x1e80100-vivobook-s15: Use the samsung,atna33xc20 panel driver
arm64: dts: qcom: x1e80100-vivobook-s15: Add lid switch
arm64: dts: qcom: x1e80100-vivobook-s15: Add bluetooth
.../boot/dts/qcom/x1e80100-asus-vivobook-s15.dts | 201 ++++++++++++++++++++-
1 file changed, 200 insertions(+), 1 deletion(-)
---
base-commit: 9115d6b2d6bdbd14c1fda449a2a1653f7ad40dce
change-id: 20241116-asus_qcom_display-ce5ff7293340
Best regards,
--
Maud Spierings <maud_spierings@...mail.com>
Powered by blists - more mailing lists