[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20241205153343.3275139-18-dwmw2@infradead.org>
Date: Thu, 5 Dec 2024 15:05:23 +0000
From: David Woodhouse <dwmw2@...radead.org>
To: kexec@...ts.infradead.org
Cc: Thomas Gleixner <tglx@...utronix.de>,
Ingo Molnar <mingo@...hat.com>,
Borislav Petkov <bp@...en8.de>,
Dave Hansen <dave.hansen@...ux.intel.com>,
x86@...nel.org,
"H. Peter Anvin" <hpa@...or.com>,
David Woodhouse <dwmw@...zon.co.uk>,
"Kirill A. Shutemov" <kirill.shutemov@...ux.intel.com>,
Kai Huang <kai.huang@...el.com>,
Nikolay Borisov <nik.borisov@...e.com>,
linux-kernel@...r.kernel.org,
Simon Horman <horms@...nel.org>,
Dave Young <dyoung@...hat.com>,
Peter Zijlstra <peterz@...radead.org>,
jpoimboe@...nel.org,
bsz@...zon.de
Subject: [PATCH v5 17/20] x86/kexec: Debugging support: Dump registers on exception
From: David Woodhouse <dwmw@...zon.co.uk>
The actual serial output function is a no-op for now.
Signed-off-by: David Woodhouse <dwmw@...zon.co.uk>
---
arch/x86/kernel/relocate_kernel_64.S | 104 ++++++++++++++++++++++++---
1 file changed, 96 insertions(+), 8 deletions(-)
diff --git a/arch/x86/kernel/relocate_kernel_64.S b/arch/x86/kernel/relocate_kernel_64.S
index 2179f691a45b..cd349b6d34a7 100644
--- a/arch/x86/kernel/relocate_kernel_64.S
+++ b/arch/x86/kernel/relocate_kernel_64.S
@@ -114,11 +114,6 @@ SYM_CODE_START_NOALIGN(relocate_kernel)
int3
SYM_CODE_END(relocate_kernel)
-#ifdef DEBUG
- UNWIND_HINT_UNDEFINED
- .balign 0x100 /* relocate_kernel will be overwritten with an IDT */
-#endif
-
SYM_CODE_START_LOCAL_NOALIGN(identity_mapped)
UNWIND_HINT_END_OF_STACK
/*
@@ -368,6 +363,68 @@ SYM_CODE_START_LOCAL_NOALIGN(swap_pages)
SYM_CODE_END(swap_pages)
#ifdef CONFIG_KEXEC_DEBUG
+/*
+ * Generic 'print character' routine (as yet unimplemented)
+ * - %al: Character to be printed (may clobber %rax)
+ * - %rdx: MMIO address or port.
+ */
+SYM_CODE_START_LOCAL_NOALIGN(pr_char)
+ UNWIND_HINT_FUNC
+ ANNOTATE_UNRET_SAFE
+ ret
+SYM_CODE_END(pr_char)
+
+/*
+ * Load pr_char function pointer into %rsi and load %rdx with whatever
+ * that function wants to see there (typically port/MMIO address).
+ */
+.macro pr_setup
+ /* No output; pr_char just returns */
+ leaq pr_char(%rip), %rsi
+.endm
+
+/* Print the nybble in %bl, clobber %rax */
+SYM_CODE_START_LOCAL_NOALIGN(pr_nybble)
+ UNWIND_HINT_FUNC
+ movb %bl, %al
+ nop
+ andb $0x0f, %al
+ addb $0x30, %al
+ cmpb $0x3a, %al
+ jb 1f
+ addb $('a' - '0' - 10), %al
+ ANNOTATE_RETPOLINE_SAFE
+1: jmp *%rsi
+SYM_CODE_END(pr_nybble)
+
+SYM_CODE_START_LOCAL_NOALIGN(pr_qword)
+ UNWIND_HINT_FUNC
+ movq $16, %rcx
+1: rolq $4, %rbx
+ call pr_nybble
+ loop 1b
+ movb $'\n', %al
+ ANNOTATE_RETPOLINE_SAFE
+ jmp *%rsi
+SYM_CODE_END(pr_qword)
+
+.macro print_reg a, b, c, d, r
+ movb $\a, %al
+ ANNOTATE_RETPOLINE_SAFE
+ call *%rsi
+ movb $\b, %al
+ ANNOTATE_RETPOLINE_SAFE
+ call *%rsi
+ movb $\c, %al
+ ANNOTATE_RETPOLINE_SAFE
+ call *%rsi
+ movb $\d, %al
+ ANNOTATE_RETPOLINE_SAFE
+ call *%rsi
+ movq \r, %rbx
+ call pr_qword
+.endm
+
SYM_CODE_START_NOALIGN(kexec_debug_exc_vectors)
/* Each of these is 6 bytes. */
.macro vec_err exc
@@ -408,11 +465,42 @@ SYM_CODE_END(kexec_debug_exc_vectors)
SYM_CODE_START_LOCAL_NOALIGN(exc_handler)
pushq %rax
+ pushq %rbx
+ pushq %rcx
pushq %rdx
- movw $0x3f8, %dx
- movb $'A', %al
- outb %al, %dx
+ pushq %rsi
+
+ /* Set up %rdx/%rsi for debug output */
+ pr_setup
+
+ /* rip and exception info */
+ print_reg 'E', 'x', 'c', ':', 40(%rsp)
+ print_reg 'E', 'r', 'r', ':', 48(%rsp)
+ print_reg 'r', 'i', 'p', ':', 54(%rsp)
+
+ /* We spilled these to the stack */
+ print_reg 'r', 'a', 'x', ':', 32(%rsp)
+ print_reg 'r', 'b', 'x', ':', 24(%rsp)
+ print_reg 'r', 'c', 'x', ':', 16(%rsp)
+ print_reg 'r', 'd', 'x', ':', 8(%rsp)
+
+ /* Other registers */
+ print_reg 'r', 's', 'i', ':', (%rsp)
+ print_reg 'r', 'd', 'i', ':', %rdi
+ print_reg 'r', '8', ' ', ':', %r8
+ print_reg 'r', '9', ' ', ':', %r9
+ print_reg 'r', '1', '0', ':', %r10
+ print_reg 'r', '1', '1', ':', %r11
+ print_reg 'r', '1', '2', ':', %r12
+ print_reg 'r', '1', '3', ':', %r13
+ print_reg 'r', '1', '4', ':', %r14
+ print_reg 'r', '1', '5', ':', %r15
+ print_reg 'c', 'r', '2', ':', %cr2
+
+ popq %rsi
popq %rdx
+ popq %rcx
+ popq %rbx
popq %rax
/* Only return from int3 */
--
2.47.0
Powered by blists - more mailing lists