[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <8a8cdb54-93b9-4093-8e85-f3d698d66e22@oss.qualcomm.com>
Date: Thu, 5 Dec 2024 17:58:19 +0100
From: Konrad Dybcio <konrad.dybcio@....qualcomm.com>
To: Varadarajan Narayanan <quic_varada@...cinc.com>, lpieralisi@...nel.org,
kw@...ux.com, manivannan.sadhasivam@...aro.org, robh@...nel.org,
bhelgaas@...gle.com, krzk+dt@...nel.org, conor+dt@...nel.org,
vkoul@...nel.org, kishon@...nel.org, andersson@...nel.org,
konradybcio@...nel.org, p.zabel@...gutronix.de,
quic_nsekar@...cinc.com, dmitry.baryshkov@...aro.org,
linux-arm-msm@...r.kernel.org, linux-pci@...r.kernel.org,
devicetree@...r.kernel.org, linux-kernel@...r.kernel.org,
linux-phy@...ts.infradead.org
Cc: Praveenkumar I <quic_ipkumar@...cinc.com>
Subject: Re: [PATCH v2 6/6] arm64: dts: qcom: ipq5332: Enable PCIe phys and
controllers
On 4.12.2024 12:33 PM, Varadarajan Narayanan wrote:
> From: Praveenkumar I <quic_ipkumar@...cinc.com>
>
> Enable the PCIe controller and PHY nodes for RDP 441.
>
> Signed-off-by: Praveenkumar I <quic_ipkumar@...cinc.com>
> Signed-off-by: Varadarajan Narayanan <quic_varada@...cinc.com>
> ---
> arch/arm64/boot/dts/qcom/ipq5332-rdp441.dts | 74 +++++++++++++++++++++
> 1 file changed, 74 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/qcom/ipq5332-rdp441.dts b/arch/arm64/boot/dts/qcom/ipq5332-rdp441.dts
> index 846413817e9a..83eca8435cff 100644
> --- a/arch/arm64/boot/dts/qcom/ipq5332-rdp441.dts
> +++ b/arch/arm64/boot/dts/qcom/ipq5332-rdp441.dts
> @@ -62,4 +62,78 @@ data-pins {
> bias-pull-up;
> };
> };
> +
> + pcie0_default: pcie0-default-state {
> + clkreq-n-pins {
> + pins = "gpio37";
> + function = "pcie0_clk";
> + drive-strength = <8>;
> + bias-pull-up;
> + };
> +
> + perst-n-pins {
> + pins = "gpio38";
> + function = "gpio";
> + drive-strength = <8>;
> + bias-pull-up;
> + output-low;
> + };
> +
> + wake-n-pins {
> + pins = "gpio39";
> + function = "pcie0_wake";
> + drive-strength = <8>;
> + bias-pull-up;
> + };
> + };
> +
> + pcie1_default: pcie1-default-state {
> + clkreq-n-pins {
> + pins = "gpio46";
> + function = "pcie1_clk";
> + drive-strength = <8>;
> + bias-pull-up;
> + };
> +
> + perst-n-pins {
> + pins = "gpio47";
> + function = "gpio";
> + drive-strength = <8>;
> + bias-pull-up;
> + output-low;
> + };
> +
> + wake-n-pins {
> + pins = "gpio48";
> + function = "pcie1_wake";
> + drive-strength = <8>;
> + bias-pull-up;
> + };
> + };
> +};
> +
> +&pcie0_phy {
> + status = "okay";
> +};
'p' < 't', please put this before &tlmm
Also, would this be something to put into rdp-common?
Do we still use all of these variants?
$ ls arch/arm64/boot/dts/qcom/ipq5332-rdp*.dts
arch/arm64/boot/dts/qcom/ipq5332-rdp441.dts
arch/arm64/boot/dts/qcom/ipq5332-rdp442.dts
arch/arm64/boot/dts/qcom/ipq5332-rdp468.dts
arch/arm64/boot/dts/qcom/ipq5332-rdp474.dts
Konrad
Powered by blists - more mailing lists