[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-Id: <20241205-gs101-phy-lanes-orientation-phy-v3-0-32f721bed219@linaro.org>
Date: Thu, 05 Dec 2024 07:33:11 +0000
From: André Draszik <andre.draszik@...aro.org>
To: Vinod Koul <vkoul@...nel.org>,
Kishon Vijay Abraham I <kishon@...nel.org>, Rob Herring <robh@...nel.org>,
Krzysztof Kozlowski <krzk+dt@...nel.org>,
Conor Dooley <conor+dt@...nel.org>,
Marek Szyprowski <m.szyprowski@...sung.com>,
Sylwester Nawrocki <s.nawrocki@...sung.com>,
Alim Akhtar <alim.akhtar@...sung.com>
Cc: Peter Griffin <peter.griffin@...aro.org>,
Tudor Ambarus <tudor.ambarus@...aro.org>,
Sam Protsenko <semen.protsenko@...aro.org>,
Will McVicker <willmcvicker@...gle.com>, Roy Luo <royluo@...gle.com>,
kernel-team@...roid.com, linux-phy@...ts.infradead.org,
devicetree@...r.kernel.org, linux-kernel@...r.kernel.org,
linux-arm-kernel@...ts.infradead.org, linux-samsung-soc@...r.kernel.org,
André Draszik <andre.draszik@...aro.org>,
Krzysztof Kozlowski <krzysztof.kozlowski@...aro.org>,
stable@...r.kernel.org
Subject: [PATCH v3 0/8] USB31DRD phy updates for Google Tensor gs101
(orientation & DWC3 rpm)
Hi,
This series enables USB3 Type-C lane orientation detection and
configuration on platforms that support this (Google gs101), and it
also allows the DWC3 core to enter runtime suspend even when UDC is
active.
For lane orientation, this driver now optionally (based on DT)
subscribes to the TCPC's lane orientation notifier and remembers the
orientation to later be used during phy_init().
To enable DWC3 runtime suspend, the gadget needs to inform the core via
dwc3_gadget_interrupt() with event type == DWC3_DEVICE_EVENT_DISCONNECT
of a cable disconnect. For that to allow to happen, this driver
therefore needs to stop forcing the Vbus and bvalid signals to active
and instead change their state based on actual conditions. The same
TCPC notifier is used to detect this, and program the hardware
accordingly.
That signal state is based on advice given by Thinh in
https://lore.kernel.org/all/20240813230625.jgkatqstyhcmpezv@synopsys.com/
Both changes together now allow cable orientation detection to work, as
the DWC3 will now call phy_exit() on cable disconnect, and we can
reprogram the lane mux in phy_init().
On top of that, there are some small related cleanup patches.
Signed-off-by: André Draszik <andre.draszik@...aro.org>
---
Changes in v3:
- patches 1 & 2: update as per Rob's suggestions
- patch 7 & 8: drop init to -1 of phy_drd->orientation (Vinod)
- patch 7: avoid an #ifdef
- Link to v2: https://lore.kernel.org/r/20241203-gs101-phy-lanes-orientation-phy-v2-0-40dcf1b7670d@linaro.org
Changes in v2:
- squash patches #2 and #3 from v1 to actually disallow
orientation-switch on !gs101 (not just optional) (Conor)
- update bindings commit message to clarify that the intention for the
driver is to work with old and new DTS (Conor)
- add cc-stable and fixes tags to power gating patch (Krzysztof)
- fix an #include and typo (Peter)
- Link to v1: https://lore.kernel.org/r/20241127-gs101-phy-lanes-orientation-phy-v1-0-1b7fce24960b@linaro.org
---
André Draszik (8):
dt-bindings: phy: samsung,usb3-drd-phy: add blank lines between DT properties
dt-bindings: phy: samsung,usb3-drd-phy: gs101: require Type-C properties
phy: exynos5-usbdrd: convert to dev_err_probe
phy: exynos5-usbdrd: fix EDS distribution tuning (gs101)
phy: exynos5-usbdrd: gs101: ensure power is gated to SS phy in phy_exit()
phy: exynos5-usbdrd: gs101: configure SS lanes based on orientation
phy: exynos5-usbdrd: subscribe to orientation notifier if required
phy: exynos5-usbdrd: allow DWC3 runtime suspend with UDC bound (E850+)
.../bindings/phy/samsung,usb3-drd-phy.yaml | 21 +-
drivers/phy/samsung/Kconfig | 1 +
drivers/phy/samsung/phy-exynos5-usbdrd.c | 215 ++++++++++++++++-----
3 files changed, 190 insertions(+), 47 deletions(-)
---
base-commit: c245a7a79602ccbee780c004c1e4abcda66aec32
change-id: 20241127-gs101-phy-lanes-orientation-phy-29d20c6d84d2
Best regards,
--
André Draszik <andre.draszik@...aro.org>
Powered by blists - more mailing lists