lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <e6f60ca6-a4d2-4539-ab9b-dabe95dd2d21@oss.qualcomm.com>
Date: Thu, 5 Dec 2024 13:52:08 +0530
From: Krishna Kurapati <krishna.kurapati@....qualcomm.com>
To: Johan Hovold <johan@...nel.org>
Cc: Stephan Gerhold <stephan.gerhold@...aro.org>,
        Bjorn Andersson <andersson@...nel.org>,
        Konrad Dybcio <konradybcio@...nel.org>, Rob Herring <robh@...nel.org>,
        Krzysztof Kozlowski <krzk+dt@...nel.org>,
        Conor Dooley
 <conor+dt@...nel.org>,
        Catalin Marinas <catalin.marinas@....com>,
        Will Deacon <will@...nel.org>, linux-arm-msm@...r.kernel.org,
        devicetree@...r.kernel.org, linux-kernel@...r.kernel.org,
        linux-arm-kernel@...ts.infradead.org, Abel Vesa <abel.vesa@...aro.org>,
        Krishna Kurapati <quic_kriskura@...cinc.com>,
        Thinh Nguyen <Thinh.Nguyen@...opsys.com>, linux-usb@...r.kernel.org
Subject: Re: [PATCH 1/2] arm64: dts: qcom: x1e80100-crd: Add USB multiport
 fingerprint reader



On 12/5/2024 1:46 PM, Johan Hovold wrote:
> On Thu, Dec 05, 2024 at 01:32:29PM +0530, Krishna Kurapati wrote:
>> On 12/3/2024 6:45 PM, Krishna Kurapati wrote:
>>> On 12/3/2024 3:50 PM, Johan Hovold wrote:
>>>> On Mon, Nov 18, 2024 at 11:34:29AM +0100, Stephan Gerhold wrote:
> 
>>>>> +&usb_mp_dwc3 {
>>>>> +    /* Limit to USB 2.0 and single port */
>>>>> +    maximum-speed = "high-speed";
>>>>> +    phys = <&usb_mp_hsphy1>;
>>>>> +    phy-names = "usb2-1";
>>>>> +};
>>>>
>>>> The dwc3 driver determines (and acts on) the number of ports based on
>>>> the port interrupts in DT and controller capabilities.
>>>>
>>>> I'm not sure we can (should) just drop the other HS PHY and the SS PHYs
>>>> that would still be there in the SoC (possibly initialised by the boot
>>>> firmware).
>>>
>>> The DWC3 core driver identifies number of ports based on xHCI registers.
>>> The QC Wrapper reads this number via interrupts. But these two values
>>> are independent of each other. The core driver uses these values to
>>> identify and manipulate phys. Even if only one HS is given in multiport
>>> it would be sufficient if the name is "usb2-1". If the others are
>>> missing, those phys would be read by driver as NULL and any ops to phys
>>> would be NOP.
> 
> No, the core driver still acts on these ports (to some extent) even if
> there is no PHY specified (e.g. updates DWC3_GUSB2PHYCFG on suspend).
> 

Yes, since the port count is obtained from xHCI registers, the 
GUSB2PHYCFG/ GUSB3PIPECTL regs are modified regardless we use the PHYs 
or not but this is still fine. It can be considered a NOP AFAIK.

> And IIRC I even had to specify more than just the fingerprint reader PHY
> on the X13s to get it to enumerate. I never had time to fully determine
> why this was the case though.
> 

This might need to be checked. Did you attempt adding each phy 
individually ? Just incase the first PHY is not the one corresponding to 
the fingerprint reader.

Regards,
Krishna,

>> However do we need to reduce the number of interrupts used in DTS ?
>> We don't need to give all interrupts as there is only one port present.
>> We don't want to enable all interrupts when ports are not exposed.
> 
> No, the interrupts are still there, wired up in the SoC, so we should
> not change that.
> 
> With runtime PM eventually enabled and working as it should, the OS
> should be able to power down any unused ports. And we could also
> consider marking some ports as not physically accessible and not
> connected as a further hint to the OS that they can be disabled even
> sooner.
> 
> Johan

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ