linux-kernel - [PATCH v3 0/3] Expand firmware-name property to load specific

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [thread-next>] [day] [month] [year] [list]

Message-ID: <20241205102213.1281865-1-quic_chejiang@quicinc.com>
Date: Thu, 5 Dec 2024 18:22:10 +0800
From: Cheng Jiang <quic_chejiang@...cinc.com>
To: Marcel Holtmann <marcel@...tmann.org>,
        Luiz Augusto von Dentz
	<luiz.dentz@...il.com>,
        Rob Herring <robh@...nel.org>,
        Krzysztof Kozlowski
	<krzk+dt@...nel.org>,
        Conor Dooley <conor+dt@...nel.org>,
        Bjorn Andersson
	<andersson@...nel.org>,
        Konrad Dybcio <konradybcio@...nel.org>,
        "Balakrishna
 Godavarthi" <quic_bgodavar@...cinc.com>,
        Rocky Liao <quic_rjliao@...cinc.com>
CC: <linux-bluetooth@...r.kernel.org>, <devicetree@...r.kernel.org>,
        <linux-kernel@...r.kernel.org>, <linux-arm-msm@...r.kernel.org>,
        <quic_chejiang@...cinc.com>, <quic_jiaymao@...cinc.com>,
        <quic_shuaz@...cinc.com>, <quic_zijuhu@...cinc.com>,
        <quic_mohamull@...cinc.com>
Subject: [PATCH v3 0/3] Expand firmware-name property to load specific

Expand the firmware-name property to specify the names of NVM and
rampatch firmware to load.

This update will support loading specific firmware (nvm and rampatch)
for certain chips, like the QCA6698 Bluetooth chip, which shares the
same IP core as the WCN6855 but has different RF components and RAM
sizes, requiring new firmware files.

Different connectivity boards may be attached to the same platform. For
example, QCA6698-based boards can support either a two-antenna or
three-antenna solution, both of which work on the sa8775p-ride platform.
Due to differences in connectivity boards and variations in RF
performance from different foundries, different NVM configurations are
used based on the board ID.

So In firmware-name, if the NVM file has an extension, the NVM file will
be used. Otherwise, the system will first try the .bNN (board ID) file,
and if that fails, it will fall back to the .bin file.

Possible configurations:
firmware-name = "QCA6698/hpnv21.bin", "QCA6698/hpbtfw21.tlv";
firmware-name = "QCA6698/hpnv21", "QCA6698/hpbtfw21.tlv";
firmware-name = "QCA6698/hpnv21.bin";

---
v3:
  1.Expand firmware-name property to specify the nvm and rampatch to
  load.
  2.Change the driver to support two items in firmware-name and choose
  the NVM file according to board id if there is no extension in NVM
  file.
  3.Update the dts file to idendify the firmware for QCA6698.
---

Cheng Jiang (3):
  dt-bindings: net: bluetooth: qca: Expand firmware-name property
  Bluetooth: qca: Expand firmware-name to load specific nvm and rampatch
  arm64: dts: qcom: sa8775p-ride: Add firmware-name in BT node

 .../net/bluetooth/qualcomm-bluetooth.yaml     |   2 +
 arch/arm64/boot/dts/qcom/sa8775p-ride.dtsi    |   1 +
 drivers/bluetooth/btqca.c                     | 154 +++++++++++++-----
 drivers/bluetooth/btqca.h                     |   5 +-
 drivers/bluetooth/hci_qca.c                   |  21 ++-
 5 files changed, 137 insertions(+), 46 deletions(-)

base-commit: c245a7a79602ccbee780c004c1e4abcda66aec32
-- 
2.25.1