| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <D64GD0NCHTO3.2W6LZKBMNE8UU@fairphone.com>
Date: Fri, 06 Dec 2024 08:51:38 +0100
From: "Luca Weiss" <luca.weiss@...rphone.com>
To: "Vikram Sharma" <quic_vikramsa@...cinc.com>, <rfoss@...nel.org>,
<todor.too@...il.com>, <bryan.odonoghue@...aro.org>, <mchehab@...nel.org>,
<robh@...nel.org>, <krzk+dt@...nel.org>, <conor+dt@...nel.org>,
<akapatra@...cinc.com>, <hariramp@...cinc.com>, <andersson@...nel.org>,
<konradybcio@...nel.org>, <hverkuil-cisco@...all.nl>,
<cros-qcom-dts-watchers@...omium.org>, <catalin.marinas@....com>,
<will@...nel.org>
Cc: <linux-arm-kernel@...ts.infradead.org>, <linux-media@...r.kernel.org>,
<linux-arm-msm@...r.kernel.org>, <devicetree@...r.kernel.org>,
<linux-kernel@...r.kernel.org>, <kernel@...cinc.com>
Subject: Re: [PATCH v7 4/5] arm64: dts: qcom: sc7280: Add support for camss
On Wed Dec 4, 2024 at 11:00 AM CET, Vikram Sharma wrote:
> Add changes to support the camera subsystem on the SC7280.
>
> Signed-off-by: Suresh Vankadara <quic_svankada@...cinc.com>
> Signed-off-by: Trishansh Bhardwaj <quic_tbhardwa@...cinc.com>
> Signed-off-by: Vikram Sharma <quic_vikramsa@...cinc.com>
Hi Vikram,
This is working on QCM6490 Fairphone 5 smartphone with WIP drivers for
IMX858 and S5KJN1, thanks!
Tested-by: Luca Weiss <luca.weiss@...rphone.com> # qcm6490-fairphone-fp5
Regards
Luca
> ---
> arch/arm64/boot/dts/qcom/sc7280.dtsi | 172 +++++++++++++++++++++++++++
> 1 file changed, 172 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/qcom/sc7280.dtsi b/arch/arm64/boot/dts/qcom/sc7280.dtsi
> index 55db1c83ef55..e363996602d6 100644
> --- a/arch/arm64/boot/dts/qcom/sc7280.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sc7280.dtsi
> @@ -4426,6 +4426,178 @@ cci1_i2c1: i2c-bus@1 {
> };
> };
>
> + camss: camss@...3000 {
> + compatible = "qcom,sc7280-camss";
> +
> + reg = <0x0 0x0acb3000 0x0 0x1000>,
> + <0x0 0x0acba000 0x0 0x1000>,
> + <0x0 0x0acc1000 0x0 0x1000>,
> + <0x0 0x0acc8000 0x0 0x1000>,
> + <0x0 0x0accf000 0x0 0x1000>,
> + <0x0 0x0ace0000 0x0 0x2000>,
> + <0x0 0x0ace2000 0x0 0x2000>,
> + <0x0 0x0ace4000 0x0 0x2000>,
> + <0x0 0x0ace6000 0x0 0x2000>,
> + <0x0 0x0ace8000 0x0 0x2000>,
> + <0x0 0x0acaf000 0x0 0x4000>,
> + <0x0 0x0acb6000 0x0 0x4000>,
> + <0x0 0x0acbd000 0x0 0x4000>,
> + <0x0 0x0acc4000 0x0 0x4000>,
> + <0x0 0x0accb000 0x0 0x4000>;
> + reg-names = "csid0",
> + "csid1",
> + "csid2",
> + "csid_lite0",
> + "csid_lite1",
> + "csiphy0",
> + "csiphy1",
> + "csiphy2",
> + "csiphy3",
> + "csiphy4",
> + "vfe0",
> + "vfe1",
> + "vfe2",
> + "vfe_lite0",
> + "vfe_lite1";
> +
> + clocks = <&camcc CAM_CC_CAMNOC_AXI_CLK>,
> + <&camcc CAM_CC_CPAS_AHB_CLK>,
> + <&camcc CAM_CC_CSIPHY0_CLK>,
> + <&camcc CAM_CC_CSI0PHYTIMER_CLK>,
> + <&camcc CAM_CC_CSIPHY1_CLK>,
> + <&camcc CAM_CC_CSI1PHYTIMER_CLK>,
> + <&camcc CAM_CC_CSIPHY2_CLK>,
> + <&camcc CAM_CC_CSI2PHYTIMER_CLK>,
> + <&camcc CAM_CC_CSIPHY3_CLK>,
> + <&camcc CAM_CC_CSI3PHYTIMER_CLK>,
> + <&camcc CAM_CC_CSIPHY4_CLK>,
> + <&camcc CAM_CC_CSI4PHYTIMER_CLK>,
> + <&gcc GCC_CAMERA_AHB_CLK>,
> + <&gcc GCC_CAMERA_HF_AXI_CLK>,
> + <&camcc CAM_CC_ICP_AHB_CLK>,
> + <&camcc CAM_CC_IFE_0_CLK>,
> + <&camcc CAM_CC_IFE_0_AXI_CLK>,
> + <&camcc CAM_CC_IFE_0_CPHY_RX_CLK>,
> + <&camcc CAM_CC_IFE_0_CSID_CLK>,
> + <&camcc CAM_CC_IFE_1_CLK>,
> + <&camcc CAM_CC_IFE_1_AXI_CLK>,
> + <&camcc CAM_CC_IFE_1_CPHY_RX_CLK>,
> + <&camcc CAM_CC_IFE_1_CSID_CLK>,
> + <&camcc CAM_CC_IFE_2_CLK>,
> + <&camcc CAM_CC_IFE_2_AXI_CLK>,
> + <&camcc CAM_CC_IFE_2_CPHY_RX_CLK>,
> + <&camcc CAM_CC_IFE_2_CSID_CLK>,
> + <&camcc CAM_CC_IFE_LITE_0_CLK>,
> + <&camcc CAM_CC_IFE_LITE_0_CPHY_RX_CLK>,
> + <&camcc CAM_CC_IFE_LITE_0_CSID_CLK>,
> + <&camcc CAM_CC_IFE_LITE_1_CLK>,
> + <&camcc CAM_CC_IFE_LITE_1_CPHY_RX_CLK>,
> + <&camcc CAM_CC_IFE_LITE_1_CSID_CLK>;
> + clock-names = "camnoc_axi",
> + "cpas_ahb",
> + "csiphy0",
> + "csiphy0_timer",
> + "csiphy1",
> + "csiphy1_timer",
> + "csiphy2",
> + "csiphy2_timer",
> + "csiphy3",
> + "csiphy3_timer",
> + "csiphy4",
> + "csiphy4_timer",
> + "gcc_camera_ahb",
> + "gcc_cam_hf_axi",
> + "icp_ahb",
> + "vfe0",
> + "vfe0_axi",
> + "vfe0_cphy_rx",
> + "vfe0_csid",
> + "vfe1",
> + "vfe1_axi",
> + "vfe1_cphy_rx",
> + "vfe1_csid",
> + "vfe2",
> + "vfe2_axi",
> + "vfe2_cphy_rx",
> + "vfe2_csid",
> + "vfe_lite0",
> + "vfe_lite0_cphy_rx",
> + "vfe_lite0_csid",
> + "vfe_lite1",
> + "vfe_lite1_cphy_rx",
> + "vfe_lite1_csid";
> +
> + interrupts = <GIC_SPI 464 IRQ_TYPE_EDGE_RISING>,
> + <GIC_SPI 466 IRQ_TYPE_EDGE_RISING>,
> + <GIC_SPI 640 IRQ_TYPE_EDGE_RISING>,
> + <GIC_SPI 468 IRQ_TYPE_EDGE_RISING>,
> + <GIC_SPI 359 IRQ_TYPE_EDGE_RISING>,
> + <GIC_SPI 477 IRQ_TYPE_EDGE_RISING>,
> + <GIC_SPI 478 IRQ_TYPE_EDGE_RISING>,
> + <GIC_SPI 479 IRQ_TYPE_EDGE_RISING>,
> + <GIC_SPI 448 IRQ_TYPE_EDGE_RISING>,
> + <GIC_SPI 122 IRQ_TYPE_EDGE_RISING>,
> + <GIC_SPI 465 IRQ_TYPE_EDGE_RISING>,
> + <GIC_SPI 467 IRQ_TYPE_EDGE_RISING>,
> + <GIC_SPI 641 IRQ_TYPE_EDGE_RISING>,
> + <GIC_SPI 469 IRQ_TYPE_EDGE_RISING>,
> + <GIC_SPI 360 IRQ_TYPE_EDGE_RISING>;
> + interrupt-names = "csid0",
> + "csid1",
> + "csid2",
> + "csid_lite0",
> + "csid_lite1",
> + "csiphy0",
> + "csiphy1",
> + "csiphy2",
> + "csiphy3",
> + "csiphy4",
> + "vfe0",
> + "vfe1",
> + "vfe2",
> + "vfe_lite0",
> + "vfe_lite1";
> +
> + interconnects = <&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_CAMERA_CFG 0>,
> + <&mmss_noc MASTER_CAMNOC_HF 0 &mc_virt SLAVE_EBI1 0>;
> + interconnect-names = "ahb", "hf_0";
> +
> + iommus = <&apps_smmu 0x800 0x4e0>;
> +
> + power-domains = <&camcc CAM_CC_IFE_0_GDSC>,
> + <&camcc CAM_CC_IFE_1_GDSC>,
> + <&camcc CAM_CC_IFE_2_GDSC>,
> + <&camcc CAM_CC_TITAN_TOP_GDSC>;
> + power-domain-names = "ife0", "ife1", "ife2", "top";
> +
> + status = "disabled";
> +
> + ports {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + port@0 {
> + reg = <0>;
> + };
> +
> + port@1 {
> + reg = <1>;
> + };
> +
> + port@2 {
> + reg = <2>;
> + };
> +
> + port@3 {
> + reg = <3>;
> + };
> +
> + port@4 {
> + reg = <4>;
> + };
> + };
> + };
> +
> camcc: clock-controller@...0000 {
> compatible = "qcom,sc7280-camcc";
> reg = <0 0x0ad00000 0 0x10000>;
Powered by blists - more mailing lists