linux-kernel - [PATCH v2 2/6] arm64: dts: qcom: sdm845-db845c-navigation-mezzanine: remove disabled ov7251 camera

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite for Android: free password hash cracker in your pocket

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <20241206-topic-misc-dt-fixes-v2-2-fb6b9cadc47f@linaro.org>
Date: Fri, 06 Dec 2024 11:12:54 +0100
From: Neil Armstrong <neil.armstrong@...aro.org>
To: Bjorn Andersson <andersson@...nel.org>, 
 Konrad Dybcio <konradybcio@...nel.org>, Rob Herring <robh@...nel.org>, 
 Krzysztof Kozlowski <krzk+dt@...nel.org>, 
 Conor Dooley <conor+dt@...nel.org>, cros-qcom-dts-watchers@...omium.org
Cc: linux-arm-msm@...r.kernel.org, devicetree@...r.kernel.org, 
 linux-kernel@...r.kernel.org, Neil Armstrong <neil.armstrong@...aro.org>
Subject: [PATCH v2 2/6] arm64: dts: qcom:
 sdm845-db845c-navigation-mezzanine: remove disabled ov7251 camera

The ov7251node has bindings check errors in the endpoint, and the
camera node was disabled since the beginning. Even when switching the
node to okay, the endpoint description to the csiphy is missing along
with the csiphy parameters.

Drop the ov7251 camera entirely until it's properly described.

This obviously fixes:
sdm845-db845c-navigation-mezzanine.dtso: camera@60: port:endpoint:data-lanes: [0, 1] is too long
	from schema $id: http://devicetree.org/schemas/media/i2c/ovti,ov7251.yaml#

Signed-off-by: Neil Armstrong <neil.armstrong@...aro.org>
---
 .../qcom/sdm845-db845c-navigation-mezzanine.dtso   | 42 ----------------------
 1 file changed, 42 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/sdm845-db845c-navigation-mezzanine.dtso b/arch/arm64/boot/dts/qcom/sdm845-db845c-navigation-mezzanine.dtso
index 0a87df806cafc8e726aacc07a772ca478d0ee3df..59970082da45203311146cc5249298f6188bf67a 100644
--- a/arch/arm64/boot/dts/qcom/sdm845-db845c-navigation-mezzanine.dtso
+++ b/arch/arm64/boot/dts/qcom/sdm845-db845c-navigation-mezzanine.dtso
@@ -79,45 +79,3 @@ ov8856_ep: endpoint {
 		};
 	};
 };
-
-&cci_i2c1 {
-	#address-cells = <1>;
-	#size-cells = <0>;
-
-	camera@60 {
-		compatible = "ovti,ov7251";
-
-		/* I2C address as per ov7251.txt linux documentation */
-		reg = <0x60>;
-
-		/* CAM3_RST_N */
-		enable-gpios = <&tlmm 21 GPIO_ACTIVE_HIGH>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&cam3_default>;
-
-		clocks = <&clock_camcc CAM_CC_MCLK3_CLK>;
-		clock-names = "xclk";
-		clock-frequency = <24000000>;
-
-		/*
-		 * The &vreg_s4a_1p8 trace always powered on.
-		 *
-		 * The 2.8V vdda-supply regulator is enabled when the
-		 * vreg_s4a_1p8 trace is pulled high.
-		 * It too is represented by a fixed regulator.
-		 *
-		 * No 1.2V vddd-supply regulator is used.
-		 */
-		vdddo-supply = <&vreg_lvs1a_1p8>;
-		vdda-supply = <&cam3_avdd_2v8>;
-
-		status = "disabled";
-
-		port {
-			ov7251_ep: endpoint {
-				data-lanes = <0 1>;
-/*				remote-endpoint = <&csiphy3_ep>; */
-			};
-		};
-	};
-};

-- 
2.34.1