[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20241206111337.726244-9-claudiu.beznea.uj@bp.renesas.com>
Date: Fri, 6 Dec 2024 13:13:30 +0200
From: Claudiu <claudiu.beznea@...on.dev>
To: prabhakar.mahadev-lad.rj@...renesas.com,
jic23@...nel.org,
lars@...afoo.de,
robh@...nel.org,
krzk+dt@...nel.org,
conor+dt@...nel.org,
geert+renesas@...der.be,
magnus.damm@...il.com,
mturquette@...libre.com,
sboyd@...nel.org,
p.zabel@...gutronix.de
Cc: claudiu.beznea@...on.dev,
linux-iio@...r.kernel.org,
linux-renesas-soc@...r.kernel.org,
devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org,
linux-clk@...r.kernel.org,
Claudiu Beznea <claudiu.beznea.uj@...renesas.com>
Subject: [PATCH v2 08/15] iio: adc: rzg2l_adc: Enable runtime PM autosuspend support
From: Claudiu Beznea <claudiu.beznea.uj@...renesas.com>
Enable runtime PM autosuspend support for the rzg2l_adc driver. With this
change, consecutive conversion requests will no longer cause the device to
be runtime-enabled/disabled after each request. Instead, the device will
transition based on the delay configured by the user.
This approach reduces the frequency of hardware register access during
runtime PM suspend/resume cycles, thereby saving CPU cycles.
Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@...renesas.com>
---
Changes in v2:
- used a non-zero default autosusped delay
- adjusted the patch description to reflect that the default autosuspend
delay has been changed
drivers/iio/adc/rzg2l_adc.c | 8 ++++++--
1 file changed, 6 insertions(+), 2 deletions(-)
diff --git a/drivers/iio/adc/rzg2l_adc.c b/drivers/iio/adc/rzg2l_adc.c
index 953511191eac..c3f9f95cdbba 100644
--- a/drivers/iio/adc/rzg2l_adc.c
+++ b/drivers/iio/adc/rzg2l_adc.c
@@ -208,7 +208,8 @@ static int rzg2l_adc_conversion(struct iio_dev *indio_dev, struct rzg2l_adc *adc
rzg2l_adc_start_stop(adc, false);
rpm_put:
- pm_runtime_put_sync(dev);
+ pm_runtime_mark_last_busy(dev);
+ pm_runtime_put_autosuspend(dev);
return ret;
}
@@ -372,7 +373,8 @@ static int rzg2l_adc_hw_init(struct device *dev, struct rzg2l_adc *adc)
rzg2l_adc_writel(adc, RZG2L_ADM(3), reg);
exit_hw_init:
- pm_runtime_put_sync(dev);
+ pm_runtime_mark_last_busy(dev);
+ pm_runtime_put_autosuspend(dev);
return ret;
}
@@ -410,6 +412,8 @@ static int rzg2l_adc_probe(struct platform_device *pdev)
"failed to get/deassert presetn\n");
}
+ pm_runtime_set_autosuspend_delay(dev, 300);
+ pm_runtime_use_autosuspend(dev);
ret = devm_pm_runtime_enable(dev);
if (ret)
return ret;
--
2.39.2
Powered by blists - more mailing lists