[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20241208195635.1271656-2-andriy.shevchenko@linux.intel.com>
Date: Sun, 8 Dec 2024 18:03:16 +0200
From: Andy Shevchenko <andriy.shevchenko@...ux.intel.com>
To: Mark Brown <broonie@...nel.org>,
linux-spi@...r.kernel.org,
linux-kernel@...r.kernel.org
Cc: Andy Shevchenko <andriy.shevchenko@...ux.intel.com>
Subject: [PATCH v1 1/2] spi: Unify firmware node type checks
The few functions are using different approaches on how to check for
the type of firmware node. Unify them to use a modern way of it.
With that in place it becomes obvious that no need to have independent
conditionals when they are dependent and hence the code generation can
be improved a little bit (clang-18, x86_64):
add/remove: 0/0 grow/shrink: 2/2 up/down: 16/-46 (-30)
Total: Before=49801, After=49771, chg -0.06%
Meanwhile no functional changes intended.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@...ux.intel.com>
---
drivers/spi/spi.c | 28 ++++++++++++++--------------
1 file changed, 14 insertions(+), 14 deletions(-)
diff --git a/drivers/spi/spi.c b/drivers/spi/spi.c
index ff1add2ecb91..88f785b9e6ec 100644
--- a/drivers/spi/spi.c
+++ b/drivers/spi/spi.c
@@ -410,24 +410,21 @@ static int spi_probe(struct device *dev)
{
const struct spi_driver *sdrv = to_spi_driver(dev->driver);
struct spi_device *spi = to_spi_device(dev);
+ struct fwnode_handle *fwnode = dev_fwnode(dev);
int ret;
ret = of_clk_set_defaults(dev->of_node, false);
if (ret)
return ret;
- if (dev->of_node) {
+ if (is_of_node(fwnode)) {
spi->irq = of_irq_get(dev->of_node, 0);
if (spi->irq == -EPROBE_DEFER)
return dev_err_probe(dev, -EPROBE_DEFER, "Failed to get irq\n");
if (spi->irq < 0)
spi->irq = 0;
- }
-
- if (has_acpi_companion(dev) && spi->irq < 0) {
- struct acpi_device *adev = to_acpi_device_node(dev->fwnode);
-
- spi->irq = acpi_dev_gpio_irq_get(adev, 0);
+ } else if (is_acpi_device_node(fwnode) && spi->irq < 0) {
+ spi->irq = acpi_dev_gpio_irq_get(to_acpi_device_node(fwnode), 0);
if (spi->irq == -EPROBE_DEFER)
return -EPROBE_DEFER;
if (spi->irq < 0)
@@ -874,15 +871,18 @@ EXPORT_SYMBOL_GPL(spi_new_device);
*/
void spi_unregister_device(struct spi_device *spi)
{
+ struct fwnode_handle *fwnode;
+
if (!spi)
return;
- if (spi->dev.of_node) {
- of_node_clear_flag(spi->dev.of_node, OF_POPULATED);
- of_node_put(spi->dev.of_node);
+ fwnode = dev_fwnode(&spi->dev);
+ if (is_of_node(fwnode)) {
+ of_node_clear_flag(to_of_node(fwnode), OF_POPULATED);
+ of_node_put(to_of_node(fwnode));
+ } else if (is_acpi_device_node(fwnode)) {
+ acpi_device_clear_enumerated(to_acpi_device_node(fwnode));
}
- if (ACPI_COMPANION(&spi->dev))
- acpi_device_clear_enumerated(ACPI_COMPANION(&spi->dev));
device_remove_software_node(&spi->dev);
device_del(&spi->dev);
spi_cleanup(spi);
@@ -1059,7 +1059,7 @@ static void spi_toggle_csgpiod(struct spi_device *spi, u8 idx, bool enable, bool
* ambiguity. That's why we use enable, that takes SPI_CS_HIGH
* into account.
*/
- if (has_acpi_companion(&spi->dev))
+ if (is_acpi_device_node(dev_fwnode(&spi->dev)))
gpiod_set_value_cansleep(spi_get_csgpiod(spi, idx), !enable);
else
/* Polarity handled by GPIO library */
@@ -4841,7 +4841,7 @@ extern struct notifier_block spi_of_notifier;
#if IS_ENABLED(CONFIG_ACPI)
static int spi_acpi_controller_match(struct device *dev, const void *data)
{
- return ACPI_COMPANION(dev->parent) == data;
+ return device_match_acpi_dev(dev->parent, data);
}
struct spi_controller *acpi_spi_find_controller_by_adev(struct acpi_device *adev)
--
2.43.0.rc1.1336.g36b5255a03ac
Powered by blists - more mailing lists