lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite for Android: free password hash cracker in your pocket
[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-ID: <20241209134459.27110-1-ansuelsmth@gmail.com>
Date: Mon,  9 Dec 2024 14:44:17 +0100
From: Christian Marangi <ansuelsmth@...il.com>
To: Christian Marangi <ansuelsmth@...il.com>,
	Lee Jones <lee@...nel.org>,
	Rob Herring <robh@...nel.org>,
	Krzysztof Kozlowski <krzk+dt@...nel.org>,
	Conor Dooley <conor+dt@...nel.org>,
	Andrew Lunn <andrew+netdev@...n.ch>,
	"David S. Miller" <davem@...emloft.net>,
	Eric Dumazet <edumazet@...gle.com>,
	Jakub Kicinski <kuba@...nel.org>,
	Paolo Abeni <pabeni@...hat.com>,
	Vladimir Oltean <olteanv@...il.com>,
	Srinivas Kandagatla <srinivas.kandagatla@...aro.org>,
	Heiner Kallweit <hkallweit1@...il.com>,
	Russell King <linux@...linux.org.uk>,
	Matthias Brugger <matthias.bgg@...il.com>,
	AngeloGioacchino Del Regno <angelogioacchino.delregno@...labora.com>,
	linux-arm-kernel@...ts.infradead.org,
	linux-mediatek@...ts.infradead.org,
	netdev@...r.kernel.org,
	devicetree@...r.kernel.org,
	linux-kernel@...r.kernel.org,
	upstream@...oha.com
Subject: [net-next PATCH v11 0/9] net: dsa: Add Airoha AN8855 support

This small series add the initial support for the Airoha AN8855 Switch.

It's a 5 port Gigabit Switch with SGMII/HSGMII upstream port.

This is starting to get in the wild and there are already some router
having this switch chip.

It's conceptually similar to mediatek switch but register and bits
are different. And there is that massive Hell that is the PCS
configuration.
Saddly for that part we have absolutely NO documentation currently.

There is this special thing where PHY needs to be calibrated with values
from the switch efuse. (the thing have a whole cpu timer and MCU)

>From v8 Driver is now evaluated with Kernel selftest scripts for DSA:

Output local_termination.sh
TEST: lan2: Unicast IPv4 to primary MAC address                     [ OK ]
TEST: lan2: Unicast IPv4 to macvlan MAC address                     [ OK ]
TEST: lan2: Unicast IPv4 to unknown MAC address                     [ OK ]
TEST: lan2: Unicast IPv4 to unknown MAC address, promisc            [ OK ]
TEST: lan2: Unicast IPv4 to unknown MAC address, allmulti           [ OK ]
TEST: lan2: Multicast IPv4 to joined group                          [ OK ]
TEST: lan2: Multicast IPv4 to unknown group                         [XFAIL]
        reception succeeded, but should have failed
TEST: lan2: Multicast IPv4 to unknown group, promisc                [ OK ]
TEST: lan2: Multicast IPv4 to unknown group, allmulti               [ OK ]
TEST: lan2: Multicast IPv6 to joined group                          [ OK ]
TEST: lan2: Multicast IPv6 to unknown group                         [XFAIL]
        reception succeeded, but should have failed
TEST: lan2: Multicast IPv6 to unknown group, promisc                [ OK ]
TEST: lan2: Multicast IPv6 to unknown group, allmulti               [ OK ]
TEST: lan2: 1588v2 over L2 transport, Sync                          [ OK ]
TEST: lan2: 1588v2 over L2 transport, Follow-Up                     [ OK ]
TEST: lan2: 1588v2 over L2 transport, Peer Delay Request            [ OK ]
TEST: lan2: 1588v2 over IPv4, Sync                                  [FAIL]
        reception failed
TEST: lan2: 1588v2 over IPv4, Follow-Up                             [FAIL]
        reception failed
TEST: lan2: 1588v2 over IPv4, Peer Delay Request                    [FAIL]
        reception failed
TEST: lan2: 1588v2 over IPv6, Sync                                  [FAIL]
        reception failed
TEST: lan2: 1588v2 over IPv6, Follow-Up                             [FAIL]
        reception failed
TEST: lan2: 1588v2 over IPv6, Peer Delay Request                    [FAIL]
        reception failed
TEST: vlan_filtering=0 bridge: Unicast IPv4 to primary MAC address   [ OK ]
TEST: vlan_filtering=0 bridge: Unicast IPv4 to macvlan MAC address   [ OK ]
TEST: vlan_filtering=0 bridge: Unicast IPv4 to unknown MAC address   [ OK ]
TEST: vlan_filtering=0 bridge: Unicast IPv4 to unknown MAC address, promisc   [ OK ]
TEST: vlan_filtering=0 bridge: Unicast IPv4 to unknown MAC address, allmulti   [ OK ]
TEST: vlan_filtering=0 bridge: Multicast IPv4 to joined group       [ OK ]
TEST: vlan_filtering=0 bridge: Multicast IPv4 to unknown group      [XFAIL]
        reception succeeded, but should have failed
TEST: vlan_filtering=0 bridge: Multicast IPv4 to unknown group, promisc   [ OK ]
TEST: vlan_filtering=0 bridge: Multicast IPv4 to unknown group, allmulti   [ OK ]
TEST: vlan_filtering=0 bridge: Multicast IPv6 to joined group       [ OK ]
TEST: vlan_filtering=0 bridge: Multicast IPv6 to unknown group      [XFAIL]
        reception succeeded, but should have failed
TEST: vlan_filtering=0 bridge: Multicast IPv6 to unknown group, promisc   [ OK ]
TEST: vlan_filtering=0 bridge: Multicast IPv6 to unknown group, allmulti   [ OK ]
TEST: vlan_filtering=1 bridge: Unicast IPv4 to primary MAC address   [ OK ]
TEST: vlan_filtering=1 bridge: Unicast IPv4 to macvlan MAC address   [ OK ]
TEST: vlan_filtering=1 bridge: Unicast IPv4 to unknown MAC address   [ OK ]
TEST: vlan_filtering=1 bridge: Unicast IPv4 to unknown MAC address, promisc   [ OK ]
TEST: vlan_filtering=1 bridge: Unicast IPv4 to unknown MAC address, allmulti   [ OK ]
TEST: vlan_filtering=1 bridge: Multicast IPv4 to joined group       [ OK ]
TEST: vlan_filtering=1 bridge: Multicast IPv4 to unknown group      [XFAIL]
        reception succeeded, but should have failed
TEST: vlan_filtering=1 bridge: Multicast IPv4 to unknown group, promisc   [ OK ]
TEST: vlan_filtering=1 bridge: Multicast IPv4 to unknown group, allmulti   [ OK ]
TEST: vlan_filtering=1 bridge: Multicast IPv6 to joined group       [ OK ]
TEST: vlan_filtering=1 bridge: Multicast IPv6 to unknown group      [XFAIL]
        reception succeeded, but should have failed
TEST: vlan_filtering=1 bridge: Multicast IPv6 to unknown group, promisc   [ OK ]
TEST: vlan_filtering=1 bridge: Multicast IPv6 to unknown group, allmulti   [ OK ]
TEST: VLAN upper: Unicast IPv4 to primary MAC address               [ OK ]
TEST: VLAN upper: Unicast IPv4 to macvlan MAC address               [ OK ]
TEST: VLAN upper: Unicast IPv4 to unknown MAC address               [ OK ]
TEST: VLAN upper: Unicast IPv4 to unknown MAC address, promisc      [ OK ]
TEST: VLAN upper: Unicast IPv4 to unknown MAC address, allmulti     [ OK ]
TEST: VLAN upper: Multicast IPv4 to joined group                    [ OK ]
TEST: VLAN upper: Multicast IPv4 to unknown group                   [XFAIL]
        reception succeeded, but should have failed
TEST: VLAN upper: Multicast IPv4 to unknown group, promisc          [ OK ]
TEST: VLAN upper: Multicast IPv4 to unknown group, allmulti         [ OK ]
TEST: VLAN upper: Multicast IPv6 to joined group                    [ OK ]
TEST: VLAN upper: Multicast IPv6 to unknown group                   [XFAIL]
        reception succeeded, but should have failed
TEST: VLAN upper: Multicast IPv6 to unknown group, promisc          [ OK ]
TEST: VLAN upper: Multicast IPv6 to unknown group, allmulti         [ OK ]
TEST: VLAN upper: 1588v2 over L2 transport, Sync                    [ OK ]
TEST: VLAN upper: 1588v2 over L2 transport, Follow-Up               [FAIL]
        reception failed
TEST: VLAN upper: 1588v2 over L2 transport, Peer Delay Request      [ OK ]
TEST: VLAN upper: 1588v2 over IPv4, Sync                            [FAIL]
        reception failed
;TEST: VLAN upper: 1588v2 over IPv4, Follow-Up                       [FAIL]
        reception failed
TEST: VLAN upper: 1588v2 over IPv4, Peer Delay Request              [FAIL]
        reception failed
TEST: VLAN upper: 1588v2 over IPv6, Sync                            [FAIL]
        reception failed
TEST: VLAN upper: 1588v2 over IPv6, Follow-Up                       [FAIL]
        reception failed
TEST: VLAN upper: 1588v2 over IPv6, Peer Delay Request              [FAIL]
        reception failed
TEST: VLAN over vlan_filtering=0 bridged port: Unicast IPv4 to primary MAC address   [ OK ]
TEST: VLAN over vlan_filtering=0 bridged port: Unicast IPv4 to macvlan MAC address   [ OK ]
TEST: VLAN over vlan_filtering=0 bridged port: Unicast IPv4 to unknown MAC address   [ OK ]
TEST: VLAN over vlan_filtering=0 bridged port: Unicast IPv4 to unknown MAC address, promisc   [ OK ]
TEST: VLAN over vlan_filtering=0 bridged port: Unicast IPv4 to unknown MAC address, allmulti   [ OK ]
TEST: VLAN over vlan_filtering=0 bridged port: Multicast IPv4 to joined group   [ OK ]
TEST: VLAN over vlan_filtering=0 bridged port: Multicast IPv4 to unknown group   [XFAIL]
        reception succeeded, but should have failed
TEST: VLAN over vlan_filtering=0 bridged port: Multicast IPv4 to unknown group, promisc   [ OK ]
TEST: VLAN over vlan_filtering=0 bridged port: Multicast IPv4 to unknown group, allmulti   [ OK ]
TEST: VLAN over vlan_filtering=0 bridged port: Multicast IPv6 to joined group   [ OK ]
TEST: VLAN over vlan_filtering=0 bridged port: Multicast IPv6 to unknown group   [XFAIL]
        reception succeeded, but should have failed
TEST: VLAN over vlan_filtering=0 bridged port: Multicast IPv6 to unknown group, promisc   [ OK ]
TEST: VLAN over vlan_filtering=0 bridged port: Multicast IPv6 to unknown group, allmulti   [ OK ]
TEST: VLAN over vlan_filtering=0 bridged port: 1588v2 over L2 transport, Sync   [ OK ]
TEST: VLAN over vlan_filtering=0 bridged port: 1588v2 over L2 transport, Follow-Up   [ OK ]
TEST: VLAN over vlan_filtering=0 bridged port: 1588v2 over L2 transport, Peer Delay Request   [ OK ]
TEST: VLAN over vlan_filtering=0 bridged port: 1588v2 over IPv4, Sync   [FAIL]
        reception failed
TEST: VLAN over vlan_filtering=0 bridged port: 1588v2 over IPv4, Follow-Up   [FAIL]
        reception failed
TEST: VLAN over vlan_filtering=0 bridged port: 1588v2 over IPv4, Peer Delay Request   [FAIL]
        reception failed
TEST: VLAN over vlan_filtering=0 bridged port: 1588v2 over IPv6, Sync   [FAIL]
        reception failed
TEST: VLAN over vlan_filtering=0 bridged port: 1588v2 over IPv6, Follow-Up   [FAIL]
        reception failed
TEST: VLAN over vlan_filtering=0 bridged port: 1588v2 over IPv6, Peer Delay Request   [FAIL]
        reception failed
TEST: VLAN over vlan_filtering=1 bridged port: Unicast IPv4 to primary MAC address   [ OK ]
TEST: VLAN over vlan_filtering=1 bridged port: Unicast IPv4 to macvlan MAC address   [ OK ]
TEST: VLAN over vlan_filtering=1 bridged port: Unicast IPv4 to unknown MAC address   [FAIL]
        reception succeeded, but should have failed
TEST: VLAN over vlan_filtering=1 bridged port: Unicast IPv4 to unknown MAC address, promisc   [ OK ]
TEST: VLAN over vlan_filtering=1 bridged port: Unicast IPv4 to unknown MAC address, allmulti   [FAIL]
        reception succeeded, but should have failed
TEST: VLAN over vlan_filtering=1 bridged port: Multicast IPv4 to joined group   [ OK ]
TEST: VLAN over vlan_filtering=1 bridged port: Multicast IPv4 to unknown group   [XFAIL]
        reception succeeded, but should have failed
TEST: VLAN over vlan_filtering=1 bridged port: Multicast IPv4 to unknown group, promisc   [ OK ]
TEST: VLAN over vlan_filtering=1 bridged port: Multicast IPv4 to unknown group, allmulti   [ OK ]
TEST: VLAN over vlan_filtering=1 bridged port: Multicast IPv6 to joined group   [ OK ]
TEST: VLAN over vlan_filtering=1 bridged port: Multicast IPv6 to unknown group   [XFAIL]
        reception succeeded, but should have failed
TEST: VLAN over vlan_filtering=1 bridged port: Multicast IPv6 to unknown group, promisc   [ OK ]
TEST: VLAN over vlan_filtering=1 bridged port: Multicast IPv6 to unknown group, allmulti   [ OK ]
TEST: VLAN over vlan_filtering=1 bridged port: 1588v2 over L2 transport, Sync   [ OK ]
TEST: VLAN over vlan_filtering=1 bridged port: 1588v2 over L2 transport, Follow-Up   [ OK ]
TEST: VLAN over vlan_filtering=1 bridged port: 1588v2 over L2 transport, Peer Delay Request   [ OK ]
TEST: VLAN over vlan_filtering=1 bridged port: 1588v2 over IPv4, Sync   [FAIL]
        reception failed
TEST: VLAN over vlan_filtering=1 bridged port: 1588v2 over IPv4, Follow-Up   [FAIL]
        reception failed
TEST: VLAN over vlan_filtering=1 bridged port: 1588v2 over IPv4, Peer Delay Request   [FAIL]
        reception failed
TEST: VLAN over vlan_filtering=1 bridged port: 1588v2 over IPv6, Sync   [FAIL]
        reception failed
TEST: VLAN over vlan_filtering=1 bridged port: 1588v2 over IPv6, Follow-Up   [FAIL]
        reception failed
TEST: VLAN over vlan_filtering=1 bridged port: 1588v2 over IPv6, Peer Delay Request   [FAIL]
        reception failed
TEST: VLAN over vlan_filtering=0 bridge: Unicast IPv4 to primary MAC address   [ OK ]
TEST: VLAN over vlan_filtering=0 bridge: Unicast IPv4 to macvlan MAC address   [ OK ]
TEST: VLAN over vlan_filtering=0 bridge: Unicast IPv4 to unknown MAC address   [ OK ]
TEST: VLAN over vlan_filtering=0 bridge: Unicast IPv4 to unknown MAC address, promisc   [ OK ]
TEST: VLAN over vlan_filtering=0 bridge: Unicast IPv4 to unknown MAC address, allmulti   [ OK ]
TEST: VLAN over vlan_filtering=0 bridge: Multicast IPv4 to joined group   [ OK ]
TEST: VLAN over vlan_filtering=0 bridge: Multicast IPv4 to unknown group   [XFAIL]
        reception succeeded, but should have failed
TEST: VLAN over vlan_filtering=0 bridge: Multicast IPv4 to unknown group, promisc   [ OK ]
TEST: VLAN over vlan_filtering=0 bridge: Multicast IPv4 to unknown group, allmulti   [ OK ]
TEST: VLAN over vlan_filtering=0 bridge: Multicast IPv6 to joined group   [ OK ]
TEST: VLAN over vlan_filtering=0 bridge: Multicast IPv6 to unknown group   [XFAIL]
        reception succeeded, but should have failed
TEST: VLAN over vlan_filtering=0 bridge: Multicast IPv6 to unknown group, promisc   [ OK ]
TEST: VLAN over vlan_filtering=0 bridge: Multicast IPv6 to unknown group, allmulti   [ OK ]
TEST: VLAN over vlan_filtering=1 bridge: Unicast IPv4 to primary MAC address   [ OK ]
TEST: VLAN over vlan_filtering=1 bridge: Unicast IPv4 to macvlan MAC address   [ OK ]
TEST: VLAN over vlan_filtering=1 bridge: Unicast IPv4 to unknown MAC address   [ OK ]
TEST: VLAN over vlan_filtering=1 bridge: Unicast IPv4 to unknown MAC address, promisc   [ OK ]
TEST: VLAN over vlan_filtering=1 bridge: Unicast IPv4 to unknown MAC address, allmulti   [ OK ]
TEST: VLAN over vlan_filtering=1 bridge: Multicast IPv4 to joined group   [ OK ]
TEST: VLAN over vlan_filtering=1 bridge: Multicast IPv4 to unknown group   [XFAIL]
        reception succeeded, but should have failed
TEST: VLAN over vlan_filtering=1 bridge: Multicast IPv4 to unknown group, promisc   [ OK ]
TEST: VLAN over vlan_filtering=1 bridge: Multicast IPv4 to unknown group, allmulti   [ OK ]
TEST: VLAN over vlan_filtering=1 bridge: Multicast IPv6 to joined group   [ OK ]
TEST: VLAN over vlan_filtering=1 bridge: Multicast IPv6 to unknown group   [XFAIL]
        reception succeeded, but should have failed
TEST: VLAN over vlan_filtering=1 bridge: Multicast IPv6 to unknown group, promisc   [ OK ]
TEST: VLAN over vlan_filtering=1 bridge: Multicast IPv6 to unknown group, allmulti   [ OK ]

Output bridge_vlan_unaware.sh
TEST: ping                                                          [ OK ]
TEST: ping6                                                         [ OK ]
TEST: FDB learning                                                  [ OK ]
TEST: Unknown unicast flood                                         [ OK ]
TEST: Unregistered multicast flood                                  [ OK ]

Output bridge_vlan_aware.sh
TEST: ping                                                          [ OK ]
TEST: ping6                                                         [ OK ]
TEST: FDB learning                                                  [ OK ]
TEST: Unknown unicast flood                                         [ OK ]
TEST: Unregistered multicast flood                                  [ OK ]
INFO: Add and delete a VLAN on bridge port lan2
TEST: ping                                                          [ OK ]
TEST: ping6                                                         [ OK ]
TEST: Externally learned FDB entry - ageing & roaming               [ OK ]
TEST: FDB entry in PVID for VLAN-tagged with other TPID             [FAIL]
        FDB entry was not learned when it should
TEST: Reception of VLAN with other TPID as untagged                 [FAIL]
        Packet was not forwarded when it should
TEST: Reception of VLAN with other TPID as untagged (no PVID)       [FAIL]
        Packet was forwarded when should not

[ For Vladimir, I still have to implement fdb_isolation but posting to
start the ball rolling for the multiple subsystem this patch affect
and for the dubious DT schema ]

Changes v11:
- Address reviews from Christophe (spell mistake + dev_err_probe)
- Fix kconfig dependency for MFD driver (depends on MDIO_DEVICE instead of MDIO)
  (indirectly fix link error for mdio APIs)
- Fix copy-paste error for MFD driver of_table
- Fix compilation error for PHY (move NVMEM to .config)
- Drop unneeded NVMEM node from MDIO example schema (from Andrew)
- Adapt MFD example schema to MDIO reg property restrictions
Changes v10:
- Entire rework to MFD + split to MDIO, EFUSE, SWITCH separate drivers
- Drop EEE OPs (while Russell finish RFC for EEE changes)
- Use new pcs_inpand OPs
- Drop AN restart function and move to pcs_config
- Enable assisted_learning and disable CPU learn (preparation for fdb_isolation)
- Move EFUSE read in Internal PHY driver to .config to handle EPROBE_DEFER
  (needed now that NVMEM driver is register externally instead of internally to switch
   node)
Changes v9:
- Error out on using 5G speed as currently not supported
- Add missing MAC_2500FD in phylink mac_capabilities
- Add comment and improve if condition for an8855_phylink_mac_config
Changes v8:
- Add port Fast Age support
- Add support for Port Isolation
- Use correct register for Learning Disable
- Add support for Ageing Time OP
- Set default PVID to 0 by default
- Add mdb OPs
- Add port change MTU
- Fix support for Upper VLAN
Changes v7:
- Fix devm_dsa_register_switch wrong export symbol
Changes v6:
- Drop standard MIB and handle with ethtool OPs (as requested by Jakub)
- Cosmetic: use bool instead of 0 or 1
Changes v5:
- Add devm_dsa_register_switch() patch
- Add Reviewed-by tag for DT patch
Changes v4:
- Set regmap readable_table static (mute compilation warning)
- Add support for port_bridge flags (LEARNING, FLOOD)
- Reset fdb struct in fdb_dump
- Drop support_asym_pause in port_enable
- Add define for get_phy_flags
- Fix bug for port not inititially part of a bridge
  (in an8855_setup the port matrix was always cleared but
   the CPU port was never initially added)
- Disable learning and flood for user port by default
- Set CPU port to flood and learning by default
- Correctly AND force duplex and flow control in an8855_phylink_mac_link_up
- Drop RGMII from pcs_config
- Check ret in "Disable AN if not in autoneg"
- Use devm_mutex_init
- Fix typo for AN8855_PORT_CHECK_MODE
- Better define AN8855_STP_LISTENING = AN8855_STP_BLOCKING
- Fix typo in AN8855_PHY_EN_DOWN_SHIFT
- Use paged helper for PHY
- Skip calibration in config_init if priv not defined
Changes v3:
- Out of RFC
- Switch PHY code to select_page API
- Better describe masks and bits in PHY driver for ADC register
- Drop raw values and use define for mii read/write
- Switch to absolute PHY address
- Replace raw values with mask and bits for pcs_config
- Fix typo for ext-surge property name
- Drop support for relocating Switch base PHY address on the bus
Changes v2:
- Drop mutex guard patch
- Drop guard usage in DSA driver
- Use __mdiobus_write/read
- Check return condition and return errors for mii read/write
- Fix wrong logic for EEE
- Fix link_down (don't force link down with autoneg)
- Fix forcing speed on sgmii autoneg
- Better document link speed for sgmii reg
- Use standard define for sgmii reg
- Imlement nvmem support to expose switch EFUSE
- Rework PHY calibration with the use of NVMEM producer/consumer
- Update DT with new NVMEM property
- Move aneg validation for 2500-basex in pcs_config
- Move r50Ohm table and function to PHY driver

Christian Marangi (9):
  dt-bindings: nvmem: Document support for Airoha AN8855 Switch EFUSE
  dt-bindings: net: Document support for Airoha AN8855 Switch Virtual
    MDIO
  dt-bindings: net: dsa: Document support for Airoha AN8855 DSA Switch
  dt-bindings: mfd: Document support for Airoha AN8855 Switch SoC
  mfd: an8855: Add support for Airoha AN8855 Switch MFD
  net: mdio: Add Airoha AN8855 Switch MDIO Passtrough
  nvmem: an8855: Add support for Airoha AN8855 Switch EFUSE
  net: dsa: Add Airoha AN8855 5-Port Gigabit DSA Switch driver
  net: phy: Add Airoha AN8855 Internal Switch Gigabit PHY

 .../bindings/mfd/airoha,an8855-mfd.yaml       |  178 ++
 .../bindings/net/airoha,an8855-mdio.yaml      |   56 +
 .../net/dsa/airoha,an8855-switch.yaml         |  105 +
 .../bindings/nvmem/airoha,an8855-efuse.yaml   |  123 +
 MAINTAINERS                                   |   17 +
 drivers/mfd/Kconfig                           |   10 +
 drivers/mfd/Makefile                          |    1 +
 drivers/mfd/airoha-an8855.c                   |  278 ++
 drivers/net/dsa/Kconfig                       |    9 +
 drivers/net/dsa/Makefile                      |    1 +
 drivers/net/dsa/an8855.c                      | 2310 +++++++++++++++++
 drivers/net/dsa/an8855.h                      |  783 ++++++
 drivers/net/mdio/Kconfig                      |    9 +
 drivers/net/mdio/Makefile                     |    1 +
 drivers/net/mdio/mdio-an8855.c                |  113 +
 drivers/net/phy/Kconfig                       |    5 +
 drivers/net/phy/Makefile                      |    1 +
 drivers/net/phy/air_an8855.c                  |  267 ++
 drivers/nvmem/Kconfig                         |   11 +
 drivers/nvmem/Makefile                        |    2 +
 drivers/nvmem/an8855-efuse.c                  |   63 +
 include/linux/mfd/airoha-an8855-mfd.h         |   41 +
 22 files changed, 4384 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/mfd/airoha,an8855-mfd.yaml
 create mode 100644 Documentation/devicetree/bindings/net/airoha,an8855-mdio.yaml
 create mode 100644 Documentation/devicetree/bindings/net/dsa/airoha,an8855-switch.yaml
 create mode 100644 Documentation/devicetree/bindings/nvmem/airoha,an8855-efuse.yaml
 create mode 100644 drivers/mfd/airoha-an8855.c
 create mode 100644 drivers/net/dsa/an8855.c
 create mode 100644 drivers/net/dsa/an8855.h
 create mode 100644 drivers/net/mdio/mdio-an8855.c
 create mode 100644 drivers/net/phy/air_an8855.c
 create mode 100644 drivers/nvmem/an8855-efuse.c
 create mode 100644 include/linux/mfd/airoha-an8855-mfd.h

-- 
2.45.2


Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ