[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <CAA8EJppcQrJkZe1ft_PLaB1C5d6vTke6BOSDZXJuNwrxy3kJKQ@mail.gmail.com>
Date: Mon, 9 Dec 2024 18:00:21 +0200
From: Dmitry Baryshkov <dmitry.baryshkov@...aro.org>
To: Johan Hovold <johan@...nel.org>
Cc: Johan Hovold <johan+linaro@...nel.org>, Bjorn Andersson <andersson@...nel.org>,
Konrad Dybcio <konradybcio@...nel.org>, Rob Herring <robh@...nel.org>,
Krzysztof Kozlowski <krzk+dt@...nel.org>, Conor Dooley <conor+dt@...nel.org>,
Jonathan Marek <jonathan@...ek.ca>, Stephan Gerhold <stephan.gerhold@...aro.org>,
Abel Vesa <abel.vesa@...aro.org>, linux-arm-msm@...r.kernel.org,
devicetree@...r.kernel.org, linux-kernel@...r.kernel.org,
regressions@...ts.linux.dev
Subject: Re: [PATCH v2 0/2] arm64: dts: qcom: x1e80100: fix USB OTG regressions
On Mon, 9 Dec 2024 at 17:30, Johan Hovold <johan@...nel.org> wrote:
>
> On Mon, Dec 09, 2024 at 03:23:05PM +0200, Dmitry Baryshkov wrote:
> > On Mon, Dec 09, 2024 at 12:19:03PM +0100, Johan Hovold wrote:
> > > A recent change enabling OTG mode on the Lenovo ThinkPad T14s USB-C
> > > ports can break SuperSpeed device hotplugging.
> > >
> > > Abel noticed that the corresponding commit for the CRD also triggers a
> > > hard reset during resume from suspend.
> > >
> > > With retimer (and orientation detection) support not even merged yet,
> > > let's revert at least until we have stable host mode in mainline.
> > >
> > > Note that Stephan and Dmitry have already identified other problems with
> > > the offending commits here:
> > >
> > > https://lore.kernel.org/all/ZxZO6Prrm2ITUZMQ@linaro.org/
> > > https://lore.kernel.org/all/hw2pdof4ajadjsjrb44f2q4cz4yh5qcqz5d3l7gjt2koycqs3k@xx5xvd26uyef
>
> > > Changes in v2
> > > - revert also the corresponding patch for the CRD which breaks suspend
> >
> > As you are reverting two commits, please revert the third one too, it
> > breaks pmic-glink.
>
> Can you be more specific?
>
> I was gonna say that pmic_glink works since hotplug and orientation
> detection still works, but I tested now with DP altmode and that is
> indeed broken unless I revert the third commit (f042bc234c2e ("arm64:
> dts: qcom: x1e80100: enable OTG on USB-C controllers")).
>
> Was that what you had in mind? Can you explain why that breaks?
See https://linux-regtracking.leemhuis.info/regzbot/regression/lore/hw2pdof4ajadjsjrb44f2q4cz4yh5qcqz5d3l7gjt2koycqs3k@xx5xvd26uyef/
For some reason commit f042bc234c2e ("arm64: dts: qcom: x1e80100: enable
OTG on USB-C controllers") seems to break UCSI on X1E80100 CRD:
[ 34.479352] ucsi_glink.pmic_glink_ucsi pmic_glink.ucsi.0: PPM init
failed, stop trying
>
> I'll respin with a v3, but please answer the above first.
>
> > > Johan Hovold (2):
> > > Revert "arm64: dts: qcom: x1e78100-t14s: enable otg on usb-c ports"
> > > Revert "arm64: dts: qcom: x1e80100-crd: enable otg on usb ports"
>
> Johan
--
With best wishes
Dmitry
Powered by blists - more mailing lists