linux-kernel - [PATCH v4 1/4] ASoC: dt-bindings: wcd937x-sdw: Add static channel mapping support

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <20241209045551.1404782-2-quic_mohs@quicinc.com>
Date: Mon, 9 Dec 2024 10:25:48 +0530
From: Mohammad Rafi Shaik <quic_mohs@...cinc.com>
To: Srinivas Kandagatla <srinivas.kandagatla@...aro.org>,
        Liam Girdwood
	<lgirdwood@...il.com>, Mark Brown <broonie@...nel.org>,
        Rob Herring
	<robh@...nel.org>,
        Krzysztof Kozlowski <krzk+dt@...nel.org>,
        Conor Dooley
	<conor+dt@...nel.org>, Vinod Koul <vkoul@...nel.org>,
        Bard Liao
	<yung-chuan.liao@...ux.intel.com>,
        Jaroslav Kysela <perex@...ex.cz>, "Takashi
 Iwai" <tiwai@...e.com>
CC: Pierre-Louis Bossart <pierre-louis.bossart@...ux.dev>,
        Sanyog Kale
	<sanyog.r.kale@...el.com>,
        <linux-arm-msm@...r.kernel.org>, <linux-sound@...r.kernel.org>,
        <devicetree@...r.kernel.org>, <linux-kernel@...r.kernel.org>,
        <quic_pkumpatl@...cinc.com>, <kernel@...cinc.com>,
        Mohammad Rafi Shaik <quic_mohs@...cinc.com>
Subject: [PATCH v4 1/4] ASoC: dt-bindings: wcd937x-sdw: Add static channel mapping support

Add static channel mapping between master and slave rx/tx ports for
Qualcomm wcd937x soundwire codec.

Currently, the channel map index value for each soundwire port is
hardcoded in the wcd937x-sdw driver, and the same channel map index
value is configured in the soundwire master.

The Qualcomm board like the QCM6490-IDP require static channel map
settings for the soundwire master and slave ports.

If another boards which are using enable wcd937x, the channel mapping
index values between master and slave may be different depending on the
board hw design and requirements. If the above properties are not used
in a SoC specific device tree, the channel mapping index values are set
to default.

With the introduction of the following channel mapping properties, it is
now possible to configure the master channel mapping directly from the
device tree.

The qcom,tx-channel-mapping property specifies the static channel mapping
between the slave and master tx ports in the order of slave port channels
which is adc1, adc2, adc3, adc4, dmic0, dmic1, mbhc, dmic2, dmic3, dmci4,
dmic5, dmic6, dmic7.

The qcom,rx-channel-mapping property specifies the static channel mapping
between the slave and master rx ports in the order of slave port channels
which is hph_l, hph_r, clsh, comp_l, comp_r, lo, dsd_r, dsd_l.

Signed-off-by: Mohammad Rafi Shaik <quic_mohs@...cinc.com>
---
 .../bindings/sound/qcom,wcd937x-sdw.yaml      | 36 +++++++++++++++++++
 1 file changed, 36 insertions(+)

diff --git a/Documentation/devicetree/bindings/sound/qcom,wcd937x-sdw.yaml b/Documentation/devicetree/bindings/sound/qcom,wcd937x-sdw.yaml
index d3cf8f59cb23..9209667044ba 100644
--- a/Documentation/devicetree/bindings/sound/qcom,wcd937x-sdw.yaml
+++ b/Documentation/devicetree/bindings/sound/qcom,wcd937x-sdw.yaml
@@ -58,6 +58,40 @@ properties:
     items:
       enum: [1, 2, 3, 4, 5]
 
+  qcom,tx-channel-mapping:
+    description: |
+      Specifies static channel mapping between slave and master tx port
+      channels.
+      In the order of slave port channels which is adc1, adc2, adc3,
+      dmic0, dmic1, mbhc, dmic2, dmic3, dmci4, dmic5, dmic6, dmic7.
+    $ref: /schemas/types.yaml#/definitions/uint8-array
+    minItems: 12
+    maxItems: 12
+    additionalItems: false
+    items:
+      enum:
+        - 0  # WCD9370_SWRM_CH1
+        - 1  # WCD9370_SWRM_CH2
+        - 2  # WCD9370_SWRM_CH3
+        - 3  # WCD9370_SWRM_CH4
+
+  qcom,rx-channel-mapping:
+    description: |
+      Specifies static channels mapping between slave and master rx port
+      channels.
+      In the order of slave port channels, which is
+      hph_l, hph_r, clsh, comp_l, comp_r, lo, dsd_r, dsd_l.
+    $ref: /schemas/types.yaml#/definitions/uint8-array
+    minItems: 8
+    maxItems: 8
+    additionalItems: false
+    items:
+      enum:
+        - 0  # WCD9370_SWRM_CH1
+        - 1  # WCD9370_SWRM_CH2
+        - 2  # WCD9370_SWRM_CH3
+        - 3  # WCD9370_SWRM_CH4
+
 required:
   - compatible
   - reg
@@ -74,6 +108,7 @@ examples:
             compatible = "sdw20217010a00";
             reg = <0 4>;
             qcom,rx-port-mapping = <1 2 3 4 5>;
+            qcom,rx-channel-mapping = /bits/ 8 <0 1 0 0 1 0 0 1>;
         };
     };
 
@@ -85,6 +120,7 @@ examples:
             compatible = "sdw20217010a00";
             reg = <0 3>;
             qcom,tx-port-mapping = <2 2 3 4>;
+            qcom,tx-channel-mapping = /bits/ 8 <0 1 0 0 1 2 2 3 0 1 2 3>;
         };
     };
 
-- 
2.34.1