linux-kernel - [PATCH v2 1/2] Revert "arm64: dts: qcom: x1e78100-t14s: enable otg on usb-c ports"

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <20241209111905.31017-2-johan+linaro@kernel.org>
Date: Mon,  9 Dec 2024 12:19:04 +0100
From: Johan Hovold <johan+linaro@...nel.org>
To: Bjorn Andersson <andersson@...nel.org>,
	Konrad Dybcio <konradybcio@...nel.org>
Cc: Rob Herring <robh@...nel.org>,
	Krzysztof Kozlowski <krzk+dt@...nel.org>,
	Conor Dooley <conor+dt@...nel.org>,
	Dmitry Baryshkov <dmitry.baryshkov@...aro.org>,
	Jonathan Marek <jonathan@...ek.ca>,
	Stephan Gerhold <stephan.gerhold@...aro.org>,
	Abel Vesa <abel.vesa@...aro.org>,
	linux-arm-msm@...r.kernel.org,
	devicetree@...r.kernel.org,
	linux-kernel@...r.kernel.org,
	regressions@...ts.linux.dev,
	Johan Hovold <johan+linaro@...nel.org>
Subject: [PATCH v2 1/2] Revert "arm64: dts: qcom: x1e78100-t14s: enable otg on usb-c ports"

This reverts commit 1a48dd7b9ac809d1bd0fd2fef509abba83433846.

A recent change enabling OTG mode on the Lenovo ThinkPad T14s USB-C
ports can break SuperSpeed device hotplugging. The host controller is
enumerated, but the device is not:

	xhci-hcd xhci-hcd.5.auto: xHCI Host Controller
	xhci-hcd xhci-hcd.5.auto: new USB bus registered, assigned bus number 3
	xhci-hcd xhci-hcd.5.auto: hcc params 0x0110ffc5 hci version 0x110 quirks 0x000080a000000810
	xhci-hcd xhci-hcd.5.auto: irq 247, io mem 0x0a800000
	xhci-hcd xhci-hcd.5.auto: xHCI Host Controller
	xhci-hcd xhci-hcd.5.auto: new USB bus registered, assigned bus number 4
	xhci-hcd xhci-hcd.5.auto: Host supports USB 3.1 Enhanced SuperSpeed
	hub 3-0:1.0: USB hub found
	hub 3-0:1.0: 1 port detected
	hub 4-0:1.0: USB hub found
	hub 4-0:1.0: 1 port detected

Once this happens on either of the two ports, no amount of disconnecting
and reconnecting makes the SuperSpeed device be enumerated, while
FullSpeed device enumeration still works.

With retimer (and orientation detection) support not even merged yet,
let's revert at least until we have stable host mode in mainline.

Fixes: 1a48dd7b9ac8 ("arm64: dts: qcom: x1e78100-t14s: enable otg on usb-c ports")
Cc: Jonathan Marek <jonathan@...ek.ca>
Signed-off-by: Johan Hovold <johan+linaro@...nel.org>
---
 .../arm64/boot/dts/qcom/x1e78100-lenovo-thinkpad-t14s.dts | 8 ++++++++
 1 file changed, 8 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/x1e78100-lenovo-thinkpad-t14s.dts b/arch/arm64/boot/dts/qcom/x1e78100-lenovo-thinkpad-t14s.dts
index 5a4a72a030d4..b4b6260c670c 100644
--- a/arch/arm64/boot/dts/qcom/x1e78100-lenovo-thinkpad-t14s.dts
+++ b/arch/arm64/boot/dts/qcom/x1e78100-lenovo-thinkpad-t14s.dts
@@ -1515,6 +1515,10 @@ &usb_1_ss0 {
 	status = "okay";
 };
 
+&usb_1_ss0_dwc3 {
+	dr_mode = "host";
+};
+
 &usb_1_ss0_dwc3_hs {
 	remote-endpoint = <&pmic_glink_ss0_hs_in>;
 };
@@ -1543,6 +1547,10 @@ &usb_1_ss1 {
 	status = "okay";
 };
 
+&usb_1_ss1_dwc3 {
+	dr_mode = "host";
+};
+
 &usb_1_ss1_dwc3_hs {
 	remote-endpoint = <&pmic_glink_ss1_hs_in>;
 };
-- 
2.45.2