[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <2d68155e.1e5b.193ae4616b9.Coremail.andyshrk@163.com>
Date: Tue, 10 Dec 2024 09:54:09 +0800 (CST)
From: "Andy Yan" <andyshrk@....com>
To: "Dmitry Baryshkov" <dmitry.baryshkov@...aro.org>
Cc: Heiko Stübner <heiko@...ech.de>,
"Daniel Semkowicz" <dse@...umatec.com>,
"Diederik de Haas" <didi.debian@...ow.org>, andy.yan@...k-chips.com,
Laurent.pinchart@...asonboard.com, andrzej.hajda@...el.com,
conor+dt@...nel.org, devicetree@...r.kernel.org,
dri-devel@...ts.freedesktop.org, jernej.skrabec@...il.com,
jonas@...boo.se, krzk+dt@...nel.org,
linux-arm-kernel@...ts.infradead.org, linux-kernel@...r.kernel.org,
linux-rockchip@...ts.infradead.org,
maarten.lankhorst@...ux.intel.com, mripard@...nel.org,
neil.armstrong@...aro.org, quentin.schulz@...rry.de,
rfoss@...nel.org, robh@...nel.org, tzimmermann@...e.de
Subject: Re:Re: Re: [PATCH v3 0/3] drm/rockchip: Add driver for the new DSI2
controller
Hi Dmitry,
在 2024-12-10 09:45:11,"Dmitry Baryshkov" <dmitry.baryshkov@...aro.org> 写道:
>On Tue, 10 Dec 2024 at 03:22, Andy Yan <andyshrk@....com> wrote:
>>
>>
>> Hi Dmitry,
>>
>> 在 2024-12-10 09:01:38,"Dmitry Baryshkov" <dmitry.baryshkov@...aro.org> 写道:
>> >On Tue, Dec 10, 2024 at 08:50:51AM +0800, Andy Yan wrote:
>> >>
>> >>
>> >> Hi,
>> >>
>> >> At 2024-12-10 07:12:26, "Heiko Stübner" <heiko@...ech.de> wrote:
>> >> >Am Montag, 9. Dezember 2024, 17:11:03 CET schrieb Diederik de Haas:
>> >> >> Hi,
>> >> >>
>> >> >> On Mon Dec 9, 2024 at 4:06 PM CET, Daniel Semkowicz wrote:
>> >> >> > On 03.12.24 21:54, Heiko Stuebner wrote:
>> >> >> > > This series adds a bridge and glue driver for the DSI2 controller found
>> >> >> > > in the rk3588 soc from Rockchip, that is based on a Synopsis IP block.
>> >> >> > >
>> >> >> >
>> >> >> > I did more tests with different LVDS displays. I tested following
>> >> >> > configurations with DSI/LVDS bridge:
>> >> >> > - 1024x600@...01
>> >> >> > - 1024x768@...02
>> >> >> > - 1280x800@...07
>> >> >> > - 1366x768@...06
>> >> >> >
>> >> >> > All of them worked without issues, except 1366x768.
>> >> >> > With this resolution, video is blurry, and offset incorrectly
>> >> >> > to the left. There are also repeating errors on the console:
>> >> >> >
>> >> >> > rockchip-drm display-subsystem: [drm] *ERROR* POST_BUF_EMPTY irq err at vp3
>> >> >> >
>> >> >> > In correct operation with other resolutions, there is no error.
>> >> >> > I am not sure if this is a problem in your series or rather in VOP2
>> >> >> > driver.
>> >> >
>> >> >This really sounds like something is wrong on the vop side.
>> >> >The interrupt is part of the vop, the divisable by 4 things likely too.
>> >>
>> >> This is a hardware limitation on vop side:
>> >> The horizontal resolution must be 4 pixel aligned.
>> >
>> >Then mode_valid() and atomic_check() must reject modes that don't fit.
>>
>> We round down to 4 pixel aligned in mode_fixup in our bsp kernel,
>
>What is meant by the "bsp kernel" here? I don't see it being present
bsp kernel means downstream vendor kernel.
>in the mainline kernel. So, if the mode is unsupported, it should be
Will it be acceptable to add this round down in the mainline mode_fixup?
>rejected.
>
>> because sometimes, some boards do indeed choose a screen that is not 4 pixel aligned
>> >
>> >>
>> >>
>> >>
>> >
>> >--
>> >With best wishes
>> >Dmitry
>
>
>
>--
>With best wishes
>Dmitry
Powered by blists - more mailing lists