linux-kernel - Re: [PATCH v1 1/7] dt-bindings: i2c: qcom,i2c-geni: Document DT properties for QUP firmware loading

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <183ec6e2-b78d-47f3-843c-b15dd3e7838d@quicinc.com>
Date: Tue, 10 Dec 2024 10:18:08 +0530
From: Viken Dadhaniya <quic_vdadhani@...cinc.com>
To: Dmitry Baryshkov <dmitry.baryshkov@...aro.org>
CC: <andi.shyti@...nel.org>, <robh@...nel.org>, <krzk+dt@...nel.org>,
        <conor+dt@...nel.org>, <gregkh@...uxfoundation.org>,
        <jirislaby@...nel.org>, <broonie@...nel.or>, <andersson@...nel.org>,
        <konradybcio@...nel.org>, <johan+linaro@...nel.org>,
        <dianders@...omium.org>, <agross@...nel.org>,
        <linux-arm-msm@...r.kernel.org>, <linux-i2c@...r.kernel.org>,
        <devicetree@...r.kernel.org>, <linux-kernel@...r.kernel.org>,
        <linux-serial@...r.kernel.org>, <linux-spi@...r.kernel.org>,
        <quic_anupkulk@...cinc.com>,
        Mukesh Kumar Savaliya
	<quic_msavaliy@...cinc.com>
Subject: Re: [PATCH v1 1/7] dt-bindings: i2c: qcom,i2c-geni: Document DT
 properties for QUP firmware loading



On 12/5/2024 4:06 AM, Dmitry Baryshkov wrote:
> On Wed, Dec 04, 2024 at 08:33:20PM +0530, Viken Dadhaniya wrote:
>> Document the 'qcom,load-firmware' and 'qcom,xfer-mode' properties to
>> support SE(Serial Engine) firmware loading from the protocol driver and to
>> select the data transfer mode, either GPI DMA (Generic Packet Interface)
>> or non-GPI mode (PIO/CPU DMA).
>>
>> I2C controller can operate in one of two modes based on the
>> 'qcom,xfer-mode' property, and the firmware is loaded accordingly.
>>
>> Co-developed-by: Mukesh Kumar Savaliya <quic_msavaliy@...cinc.com>
>> Signed-off-by: Mukesh Kumar Savaliya <quic_msavaliy@...cinc.com>
>> Signed-off-by: Viken Dadhaniya <quic_vdadhani@...cinc.com>
>> ---
>>   .../devicetree/bindings/i2c/qcom,i2c-geni-qcom.yaml   | 11 +++++++++++
>>   1 file changed, 11 insertions(+)
>>
>> diff --git a/Documentation/devicetree/bindings/i2c/qcom,i2c-geni-qcom.yaml b/Documentation/devicetree/bindings/i2c/qcom,i2c-geni-qcom.yaml
>> index 9f66a3bb1f80..a26f34fce1bb 100644
>> --- a/Documentation/devicetree/bindings/i2c/qcom,i2c-geni-qcom.yaml
>> +++ b/Documentation/devicetree/bindings/i2c/qcom,i2c-geni-qcom.yaml
>> @@ -66,6 +66,15 @@ properties:
>>     required-opps:
>>       maxItems: 1
>>   
>> +  qcom,load-firmware:
>> +    type: boolean
>> +    description: Optional property to load SE (serial engine) Firmware from protocol driver.
>> +
>> +  qcom,xfer-mode:
>> +    description: Value 1,2 and 3 represents FIFO, CPU DMA and GSI DMA mode respectively.
>> +    $ref: /schemas/types.yaml#/definitions/uint32
>> +    enum: [1, 2, 3]
>> +
>>   required:
>>     - compatible
>>     - interrupts
>> @@ -142,5 +151,7 @@ examples:
>>           interconnect-names = "qup-core", "qup-config", "qup-memory";
>>           power-domains = <&rpmhpd SC7180_CX>;
>>           required-opps = <&rpmhpd_opp_low_svs>;
>> +        qcom,load-firmware;
> 
> please use instead:
> firmware-name = "qcom/sc7180/qupv3.elf"

Agreed, will be adopted in next patch.

> 
>> +        qcom,xfer-mode = <1>;
>>       };
>>   ...
>> -- 
>> 2.34.1
>>
>