[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-ID: <20241210-add-display-support-for-qcs615-platform-v4-0-2d875a67602d@quicinc.com>
Date: Tue, 10 Dec 2024 14:53:51 +0800
From: Fange Zhang <quic_fangez@...cinc.com>
To: Rob Clark <robdclark@...il.com>,
Abhinav Kumar
<quic_abhinavk@...cinc.com>,
Dmitry Baryshkov <dmitry.baryshkov@...aro.org>,
Sean Paul <sean@...rly.run>,
Marijn Suijten <marijn.suijten@...ainline.org>,
Maarten Lankhorst <maarten.lankhorst@...ux.intel.com>,
Maxime Ripard
<mripard@...nel.org>,
Thomas Zimmermann <tzimmermann@...e.de>,
David Airlie
<airlied@...il.com>, Simona Vetter <simona@...ll.ch>,
Rob Herring
<robh@...nel.org>,
Krzysztof Kozlowski <krzk+dt@...nel.org>,
Conor Dooley
<conor+dt@...nel.org>,
Krishna Manikandan <quic_mkrishn@...cinc.com>,
"Bjorn
Andersson" <andersson@...nel.org>,
Konrad Dybcio <konradybcio@...nel.org>,
Fange Zhang <quic_fangez@...cinc.com>, Liu Li <quic_lliu6@...cinc.com>,
Xiangxu Yin <quic_xiangxuy@...cinc.com>
CC: <linux-arm-msm@...r.kernel.org>, <dri-devel@...ts.freedesktop.org>,
<freedreno@...ts.freedesktop.org>, <devicetree@...r.kernel.org>,
<linux-kernel@...r.kernel.org>,
Krzysztof Kozlowski
<krzysztof.kozlowski@...aro.org>
Subject: [PATCH v4 0/9] Add display support for QCS615 platform
This series aims to enable display on the QCS615 platform
1.Add MDSS & DPU support for QCS615
2.Add DSI support for QCS615
QCS615 platform supports DisplayPort, and this feature will be added in a future patch
Only dts part of this patch series depends on the following patch series
The other dependency patches have already been merged into linux-next
- dispcc
https://lore.kernel.org/all/20241108-qcs615-mm-clockcontroller-v3-0-7d3b2d235fdf@quicinc.com/
- dispcc dts
https://lore.kernel.org/lkml/20241108-qcs615-mm-dt-nodes-v1-0-b2669cac0624@quicinc.com/
Signed-off-by: Li Liu <quic_lliu6@...cinc.com>
Signed-off-by: Fange Zhang <quic_fangez@...cinc.com>
---
Changes in v4:
- Add dp-connector node for anx_7625_out [Dmitry]
- Add missing qcom,sm6150-dsi-ctrl for dsi-controller-main.yaml [Krzysztof]
- Change VIG_SDM845_MASK to VIG_SDM845_MASK_SDMA for sm6150_sspp [Abhinav]
- Change DMA_SDM845_MASK to DMA_SDM845_MASK_SDMA for sm6150_sspp [Abhinav]
- Remove redundant annotation from sdm845_dsi_cfg [Dmitry]
- Remove redundant blocks from sm6150_intf [Dmitry]
- Update mdp_opp_table opp clk to correct value
- Link to v3: https://lore.kernel.org/r/20241122-add-display-support-for-qcs615-platform-v3-0-35252e3a51fe@quicinc.com
Changes in v3:
- Add reg_bus_bw for sm6150_data [Dmitry]
- Remove patch for SX150X defconfig [Dmitry]
- Remove dsi0_hpd_cfg_pins from ioexp [Dmitry]
- Remove dsi0_cdet_cfg_pins from ioexpa [Dmitry]
- Remove tlmm node for ioexp_intr_active and ioAexp_reset_active [Dmitry]
- Remove qcs615_dsi_regulators and reuse sdm845_dsi_cfg [Dmitry, Konrad]
- Rename qcs615/QCS615 to sm6150/SM6150 for whole patch [Dmitry]
- Rename qcom,dsi-phy-14nm-615 to qcom,sm6150-dsi-phy-14nm [Dmitry]
- Rename qcom,qcs615-dsi-ctrl to qcom,sm6150-dsi-ctrl [Dmitry]
- Rename qcom,qcs615-dpu to qcom,sm6150-dpu [Dmitry]
- Rename qcom,qcs615-mdss to qcom,sm6150-mdss [Dmitry]
- Split drm dsi patch to dsi and dsi phy [Dmitry]
- Update yaml clocks node with ephemeral nodes and remove unsed include [Dmitry, Rob]
- Link to v2: https://lore.kernel.org/r/20241113-add-display-support-for-qcs615-platform-v2-0-2873eb6fb869@quicinc.com
Changes in v2:
- Add QCS615 DP controller comment in commit message [Dmitry]
- Add comments for dsi_dp_hpd_cfg_pins and dsi_dp_cdet_cfg_pins [Dmitry]
- Add missing port@1 for connector for anx7625 [Dmitry]
- Change 0 to QCOM_ICC_TAG_ALWAYS for mdss interconnects [Dmitry]
- Change 0 to GPIO_ACTIVE_HIGH for GPIO flags [Dmitry]
- Move anx_7625 to same node [Dmitry]
- Move status to last in mdss_dsi0 [Dmitry]
- Rename dsi0_hpd_cfg_pins to dsi_dp_hpd_cfg_pins in ioexp [Dmitry]
- Rename dsi0_cdet_cfg_pins to dsi_dp_cdet_cfg_pins in ioexp [Dmitry]
- Rename anx_7625_1 to dsi_anx_7625 in ioexp [Dmitry]
- Remove absent block in qcs615_lm [Dmitry]
- Remove merge_3d value in qcs615_pp [Dmitry]
- Remove redundant annotation in qcs615_sspp [Dmitry]
- Remove unsupported dsi clk from dsi0_opp_table [Dmitry]
- Remove dp_hpd_cfg_pins node from ioexp [Dmitry]
- Splite drm driver patches to mdss, dpu and dsi [Dmitry]
- Link to v1: https://lore.kernel.org/r/20241014-add_display_support_for_qcs615-v1-0-4efa191dbdd4@quicinc.com
---
Li Liu (9):
dt-bindings: display/msm: Add SM6150 DSI phy
dt-bindings: display/msm: dsi-controller-main: Document SM6150
dt-bindings: display/msm: Add SM6150 MDSS & DPU
drm/msm: mdss: Add SM6150 support
drm/msm/dpu: Add SM6150 support
drm/msm/dsi: Add dsi phy support for SM6150
drm/msm/dsi: Add support for SM6150
arm64: dts: qcom: Add display support for QCS615
arm64: dts: qcom: Add display support for QCS615 RIDE board
.../bindings/display/msm/dsi-controller-main.yaml | 2 +
.../bindings/display/msm/dsi-phy-14nm.yaml | 1 +
.../bindings/display/msm/qcom,sm6150-dpu.yaml | 108 +++++++++
.../bindings/display/msm/qcom,sm6150-mdss.yaml | 245 ++++++++++++++++++++
arch/arm64/boot/dts/qcom/qcs615-ride.dts | 89 ++++++++
arch/arm64/boot/dts/qcom/qcs615.dtsi | 181 ++++++++++++++-
.../gpu/drm/msm/disp/dpu1/catalog/dpu_5_3_sm6150.h | 254 +++++++++++++++++++++
drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c | 1 +
drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h | 1 +
drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c | 1 +
drivers/gpu/drm/msm/dsi/dsi_cfg.c | 2 +
drivers/gpu/drm/msm/dsi/dsi_cfg.h | 1 +
drivers/gpu/drm/msm/dsi/phy/dsi_phy.c | 2 +
drivers/gpu/drm/msm/dsi/phy/dsi_phy.h | 1 +
drivers/gpu/drm/msm/dsi/phy/dsi_phy_14nm.c | 21 ++
drivers/gpu/drm/msm/msm_mdss.c | 8 +
16 files changed, 917 insertions(+), 1 deletion(-)
---
base-commit: 1031240d9d007339c6661dddfbe2efda0b3859e9
change-id: 20241209-add-display-support-for-qcs615-platform-22b8e8848f87
Best regards,
--
fangez <quic_fangez@...cinc.com>
Powered by blists - more mailing lists