| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <ey33m3kcvbadlkbcbey3xbocknpvyv3osj564c7676eru4umxm@u4bwfxy5xulr>
Date: Wed, 11 Dec 2024 16:42:49 +0100
From: Jacopo Mondi <jacopo.mondi@...asonboard.com>
To: keke.li@...ogic.com
Cc: Mauro Carvalho Chehab <mchehab@...nel.org>,
Rob Herring <robh@...nel.org>, Krzysztof Kozlowski <krzk+dt@...nel.org>,
Conor Dooley <conor+dt@...nel.org>, linux-media@...r.kernel.org, devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org, kieran.bingham@...asonboard.com,
laurent.pinchart@...asonboard.com, dan.scally@...asonboard.com
Subject: Re: [PATCH v4 04/10] media: platform: Add c3 mipi adapter driver
Hi Keke
On Thu, Dec 05, 2024 at 05:04:30PM +0800, Keke Li via B4 Relay wrote:
> From: Keke Li <keke.li@...ogic.com>
>
> This driver mainly responsible for organizing
> MIPI data and sending raw data to ISP pipeline.
>
> Reviewed-by: Daniel Scally <dan.scally@...asonboard.com>
> Signed-off-by: Keke Li <keke.li@...ogic.com>
> ---
> MAINTAINERS | 7 +
> drivers/media/platform/amlogic/c3/Kconfig | 1 +
> drivers/media/platform/amlogic/c3/Makefile | 1 +
> .../media/platform/amlogic/c3/mipi-adapter/Kconfig | 16 +
> .../platform/amlogic/c3/mipi-adapter/Makefile | 3 +
> .../amlogic/c3/mipi-adapter/c3-mipi-adap.c | 892 +++++++++++++++++++++
> 6 files changed, 920 insertions(+)
>
> diff --git a/MAINTAINERS b/MAINTAINERS
> index 9b405a694881..0136101bef0d 100644
> --- a/MAINTAINERS
> +++ b/MAINTAINERS
> @@ -1224,6 +1224,13 @@ F: Documentation/devicetree/bindings/perf/amlogic,g12-ddr-pmu.yaml
> F: drivers/perf/amlogic/
> F: include/soc/amlogic/
>
> +AMLOGIC MIPI ADAPTER DRIVER
> +M: Keke Li <keke.li@...ogic.com>
> +L: linux-media@...r.kernel.org
> +S: Maintained
> +F: Documentation/devicetree/bindings/media/amlogic,c3-mipi-adapter.yaml
> +F: drivers/media/platform/amlogic/c3/mipi-adapter/
> +
> AMLOGIC MIPI CSI2 DRIVER
> M: Keke Li <keke.li@...ogic.com>
> L: linux-media@...r.kernel.org
> diff --git a/drivers/media/platform/amlogic/c3/Kconfig b/drivers/media/platform/amlogic/c3/Kconfig
> index 098d458747b8..a504a1eb22e6 100644
> --- a/drivers/media/platform/amlogic/c3/Kconfig
> +++ b/drivers/media/platform/amlogic/c3/Kconfig
> @@ -1,3 +1,4 @@
> # SPDX-License-Identifier: GPL-2.0-only
>
> +source "drivers/media/platform/amlogic/c3/mipi-adapter/Kconfig"
> source "drivers/media/platform/amlogic/c3/mipi-csi2/Kconfig"
> diff --git a/drivers/media/platform/amlogic/c3/Makefile b/drivers/media/platform/amlogic/c3/Makefile
> index a468fb782f94..770b2a2903ad 100644
> --- a/drivers/media/platform/amlogic/c3/Makefile
> +++ b/drivers/media/platform/amlogic/c3/Makefile
> @@ -1,3 +1,4 @@
> # SPDX-License-Identifier: GPL-2.0-only
>
> +obj-y += mipi-adapter/
> obj-y += mipi-csi2/
> diff --git a/drivers/media/platform/amlogic/c3/mipi-adapter/Kconfig b/drivers/media/platform/amlogic/c3/mipi-adapter/Kconfig
> new file mode 100644
> index 000000000000..bf19059b3543
> --- /dev/null
> +++ b/drivers/media/platform/amlogic/c3/mipi-adapter/Kconfig
> @@ -0,0 +1,16 @@
> +# SPDX-License-Identifier: GPL-2.0-only
> +
> +config VIDEO_C3_MIPI_ADAPTER
> + tristate "Amlogic C3 MIPI adapter"
> + depends on ARCH_MESON || COMPILE_TEST
> + depends on VIDEO_DEV
> + depends on OF
> + select MEDIA_CONTROLLER
> + select V4L2_FWNODE
> + select VIDEO_V4L2_SUBDEV_API
> + help
> + Video4Linux2 driver for Amlogic C3 MIPI adapter.
> + C3 MIPI adapter mainly responsible for organizing
> + MIPI data and sending raw data to ISP pipeline.
> +
> + To compile this driver as a module choose m here.
> diff --git a/drivers/media/platform/amlogic/c3/mipi-adapter/Makefile b/drivers/media/platform/amlogic/c3/mipi-adapter/Makefile
> new file mode 100644
> index 000000000000..216fc310c5b4
> --- /dev/null
> +++ b/drivers/media/platform/amlogic/c3/mipi-adapter/Makefile
> @@ -0,0 +1,3 @@
> +# SPDX-License-Identifier: GPL-2.0-only
> +
> +obj-$(CONFIG_VIDEO_C3_MIPI_ADAPTER) += c3-mipi-adap.o
> diff --git a/drivers/media/platform/amlogic/c3/mipi-adapter/c3-mipi-adap.c b/drivers/media/platform/amlogic/c3/mipi-adapter/c3-mipi-adap.c
> new file mode 100644
> index 000000000000..01557759f211
> --- /dev/null
> +++ b/drivers/media/platform/amlogic/c3/mipi-adapter/c3-mipi-adap.c
> @@ -0,0 +1,892 @@
> +// SPDX-License-Identifier: (GPL-2.0-only OR MIT)
> +/*
> + * Copyright (C) 2024 Amlogic, Inc. All rights reserved
> + */
> +
> +#include <linux/clk.h>
> +#include <linux/device.h>
> +#include <linux/module.h>
> +#include <linux/mutex.h>
> +#include <linux/platform_device.h>
> +#include <linux/pm_runtime.h>
> +
> +#include <media/mipi-csi2.h>
> +#include <media/v4l2-async.h>
> +#include <media/v4l2-common.h>
> +#include <media/v4l2-device.h>
> +#include <media/v4l2-fwnode.h>
> +#include <media/v4l2-mc.h>
> +#include <media/v4l2-subdev.h>
> +
> +/*
> + * Adapter Block Diagram
> + * ---------------------
> + *
> + * +--------------------------------------------+
> + * | Adapter |
> + * |--------------------------------------------|
> + * +------------+ | | | | | +-----+
> + * | MIPI CSI-2 |--->| Frontend -> DDR_RD0 -> PIXEL0 -> ALIGNMENT |--->| ISP |
> + * +------------+ | | | | | +-----+
> + * +--------------------------------------------+
> + *
> + */
> +
> +/* C3 adapter submodule definition */
> +enum {
> + SUBMD_TOP,
> + SUBMD_FD,
> + SUBMD_RD,
> +};
> +
> +#define ADAP_SUBMD_MASK GENMASK(17, 16)
> +#define ADAP_SUBMD_SHIFT 16
> +#define ADAP_SUBMD(x) (((x) & (ADAP_SUBMD_MASK)) >> (ADAP_SUBMD_SHIFT))
> +#define ADAP_REG_ADDR_MASK GENMASK(15, 0)
> +#define ADAP_REG_ADDR(x) ((x) & (ADAP_REG_ADDR_MASK))
> +#define ADAP_REG_T(x) ((SUBMD_TOP << ADAP_SUBMD_SHIFT) | (x))
> +#define ADAP_REG_F(x) ((SUBMD_FD << ADAP_SUBMD_SHIFT) | (x))
> +#define ADAP_REG_R(x) ((SUBMD_RD << ADAP_SUBMD_SHIFT) | (x))
> +
> +#define MIPI_ADAP_CLOCK_NUM_MAX 3
> +#define MIPI_ADAP_SUBDEV_NAME "c3-mipi-adapter"
> +
> +/* C3 MIPI adapter TOP register */
> +#define MIPI_ADAPT_DE_CTRL0 ADAP_REG_T(0x40)
> +#define MIPI_ADAPT_DE_CTRL0_RD_BUS_BYPASS_MASK BIT(3)
> +#define MIPI_ADAPT_DE_CTRL0_RD_BUS_BYPASS_EN BIT(3)
> +#define MIPI_ADAPT_DE_CTRL0_RD_BUS_BYPASS_DIS (0 << 3)
> +#define MIPI_ADAPT_DE_CTRL0_WR_BUS_BYPASS_MASK BIT(7)
> +#define MIPI_ADAPT_DE_CTRL0_WR_BUS_BYPASS_EN BIT(7)
> +#define MIPI_ADAPT_DE_CTRL0_WR_BUS_BYPASS_DIS (0 << 7)
> +
> +/* C3 MIPI adapter FRONTEND register */
> +#define CSI2_CLK_RESET ADAP_REG_F(0x00)
> +#define CSI2_CLK_RESET_SW_RESET_MASK BIT(0)
> +#define CSI2_CLK_RESET_SW_RESET_APPLY BIT(0)
> +#define CSI2_CLK_RESET_SW_RESET_RELEASE (0 << 0)
> +#define CSI2_CLK_RESET_CLK_ENABLE_MASK BIT(1)
> +#define CSI2_CLK_RESET_CLK_ENABLE_EN BIT(1)
> +#define CSI2_CLK_RESET_CLK_ENABLE_DIS (0 << 1)
> +
> +#define CSI2_GEN_CTRL0 ADAP_REG_F(0x04)
> +#define CSI2_GEN_CTRL0_VC0_MASK BIT(0)
> +#define CSI2_GEN_CTRL0_VC0_EN BIT(0)
> +#define CSI2_GEN_CTRL0_VC0_DIS (0 << 0)
> +#define CSI2_GEN_CTRL0_ENABLE_PACKETS_MASK GENMASK(20, 16)
> +#define CSI2_GEN_CTRL0_ENABLE_PACKETS_RAW BIT(16)
> +#define CSI2_GEN_CTRL0_ENABLE_PACKETS_YUV (2 << 16)
> +
> +#define CSI2_X_START_END_ISP ADAP_REG_F(0x0c)
> +#define CSI2_X_START_END_ISP_X_START_MASK GENMASK(15, 0)
> +#define CSI2_X_START_END_ISP_X_START(x) ((x) << 0)
> +#define CSI2_X_START_END_ISP_X_END_MASK GENMASK(31, 16)
> +#define CSI2_X_START_END_ISP_X_END(x) (((x) - 1) << 16)
> +
> +#define CSI2_Y_START_END_ISP ADAP_REG_F(0x10)
> +#define CSI2_Y_START_END_ISP_Y_START_MASK GENMASK(15, 0)
> +#define CSI2_Y_START_END_ISP_Y_START(x) ((x) << 0)
> +#define CSI2_Y_START_END_ISP_Y_END_MASK GENMASK(31, 16)
> +#define CSI2_Y_START_END_ISP_Y_END(x) (((x) - 1) << 16)
> +
> +#define CSI2_VC_MODE ADAP_REG_F(0x1c)
> +#define CSI2_VC_MODE_VS_ISP_SEL_VC_MASK GENMASK(19, 16)
> +#define CSI2_VC_MODE_VS_ISP_SEL_VC_0 BIT(16)
> +#define CSI2_VC_MODE_VS_ISP_SEL_VC_1 (2 << 16)
> +#define CSI2_VC_MODE_VS_ISP_SEL_VC_2 (4 << 16)
> +#define CSI2_VC_MODE_VS_ISP_SEL_VC_3 (8 << 16)
> +#define CSI2_VC_MODE_HS_ISP_SEL_VC_MASK GENMASK(23, 20)
> +#define CSI2_VC_MODE_HS_ISP_SEL_VC_0 BIT(20)
> +#define CSI2_VC_MODE_HS_ISP_SEL_VC_1 (2 << 20)
> +#define CSI2_VC_MODE_HS_ISP_SEL_VC_2 (4 << 20)
> +#define CSI2_VC_MODE_HS_ISP_SEL_VC_3 (8 << 20)
> +
> +/* C3 MIPI adapter READER register */
> +#define MIPI_ADAPT_DDR_RD0_CNTL0 ADAP_REG_R(0x00)
> +#define MIPI_ADAPT_DDR_RD0_CNTL0_MODULE_EN_MASK BIT(0)
> +#define MIPI_ADAPT_DDR_RD0_CNTL0_MODULE_EN BIT(0)
> +#define MIPI_ADAPT_DDR_RD0_CNTL0_MODULE_DIS (0 << 0)
> +
> +#define MIPI_ADAPT_DDR_RD0_CNTL1 ADAP_REG_R(0x04)
> +#define MIPI_ADAPT_DDR_RD0_CNTL1_PORT_SEL_MASK GENMASK(31, 30)
> +#define MIPI_ADAPT_DDR_RD0_CNTL1_PORT_SEL_DIRECT_MODE (0 << 30)
> +#define MIPI_ADAPT_DDR_RD0_CNTL1_PORT_SEL_DDR_MODE BIT(30)
> +
> +#define MIPI_ADAPT_PIXEL0_CNTL0 ADAP_REG_R(0x80)
> +#define MIPI_ADAPT_PIXEL0_CNTL0_WORK_MODE_MASK GENMASK(17, 16)
> +#define MIPI_ADAPT_PIXEL0_CNTL0_WORK_MODE_RAW_DDR_PATH (0 << 16)
> +#define MIPI_ADAPT_PIXEL0_CNTL0_WORK_MODE_RAW_DIRECT_PATH BIT(16)
> +#define MIPI_ADAPT_PIXEL0_CNTL0_DATA_TYPE_MASK GENMASK(25, 20)
> +#define MIPI_ADAPT_PIXEL0_CNTL0_DATA_TYPE(x) ((x) << 20)
> +#define MIPI_ADAPT_PIXEL0_CNTL0_START_EN_MASK BIT(31)
> +#define MIPI_ADAPT_PIXEL0_CNTL0_START_EN BIT(31)
> +
> +#define MIPI_ADAPT_ALIG_CNTL0 ADAP_REG_R(0x100)
> +#define MIPI_ADAPT_ALIG_CNTL0_H_TOTAL_NUM_MASK GENMASK(15, 0)
> +#define MIPI_ADAPT_ALIG_CNTL0_H_TOTAL_NUM(x) ((x) << 0)
> +#define MIPI_ADAPT_ALIG_CNTL0_V_TOTAL_NUM_MASK GENMASK(31, 16)
> +#define MIPI_ADAPT_ALIG_CNTL0_V_TOTAL_NUM(x) ((x) << 16)
> +
> +#define MIPI_ADAPT_ALIG_CNTL1 ADAP_REG_R(0x104)
> +#define MIPI_ADAPT_ALIG_CNTL1_HPE_NUM_MASK GENMASK(31, 16)
> +#define MIPI_ADAPT_ALIG_CNTL1_HPE_NUM(x) ((x) << 16)
> +
> +#define MIPI_ADAPT_ALIG_CNTL2 ADAP_REG_R(0x108)
> +#define MIPI_ADAPT_ALIG_CNTL2_VPE_NUM_MASK GENMASK(31, 16)
> +#define MIPI_ADAPT_ALIG_CNTL2_VPE_NUM(x) ((x) << 16)
> +
> +#define MIPI_ADAPT_ALIG_CNTL6 ADAP_REG_R(0x118)
> +#define MIPI_ADAPT_ALIG_CNTL6_PATH0_EN_MASK BIT(0)
> +#define MIPI_ADAPT_ALIG_CNTL6_PATH0_EN BIT(0)
> +#define MIPI_ADAPT_ALIG_CNTL6_PATH0_DIS (0 << 0)
> +#define MIPI_ADAPT_ALIG_CNTL6_PIX0_DATA_MODE_MASK BIT(4)
> +#define MIPI_ADAPT_ALIG_CNTL6_PIX0_DATA_MODE_DDR (0 << 4)
> +#define MIPI_ADAPT_ALIG_CNTL6_PIX0_DATA_MODE_DIRECT BIT(4)
> +#define MIPI_ADAPT_ALIG_CNTL6_DATA0_EN_MASK BIT(12)
> +#define MIPI_ADAPT_ALIG_CNTL6_DATA0_EN BIT(12)
> +#define MIPI_ADAPT_ALIG_CNTL6_DATA0_DIS (0 << 12)
> +
> +#define MIPI_ADAPT_ALIG_CNTL8 ADAP_REG_R(0x120)
> +#define MIPI_ADAPT_ALIG_CNTL8_FRMAE_CONTINUE_MASK BIT(5)
> +#define MIPI_ADAPT_ALIG_CNTL8_FRMAE_CONTINUE_EN BIT(5)
> +#define MIPI_ADAPT_ALIG_CNTL8_FRMAE_CONTINUE_DIS (0 << 5)
> +#define MIPI_ADAPT_ALIG_CNTL8_EXCEED_DIS_MASK BIT(12)
> +#define MIPI_ADAPT_ALIG_CNTL8_EXCEED_HOLD (0 << 12)
> +#define MIPI_ADAPT_ALIG_CNTL8_EXCEED_NOT_HOLD BIT(12)
> +#define MIPI_ADAPT_ALIG_CNTL8_START_EN_MASK BIT(31)
> +#define MIPI_ADAPT_ALIG_CNTL8_START_EN BIT(31)
> +
> +#define MIPI_ADAP_MAX_WIDTH 2888
> +#define MIPI_ADAP_MIN_WIDTH 160
> +#define MIPI_ADAP_MAX_HEIGHT 2240
> +#define MIPI_ADAP_MIN_HEIGHT 120
> +#define MIPI_ADAP_DEFAULT_WIDTH 1920
> +#define MIPI_ADAP_DEFAULT_HEIGHT 1080
> +#define MIPI_ADAP_DEFAULT_FMT MEDIA_BUS_FMT_SRGGB10_1X10
> +
> +/* C3 MIPI adapter pad list */
> +enum {
> + MIPI_ADAP_PAD_SINK,
> + MIPI_ADAP_PAD_SRC,
> + MIPI_ADAP_PAD_MAX
> +};
> +
> +/*
> + * struct adap_info - mipi adapter information
> + *
> + * @clocks: array of mipi adapter clock names
> + * @clock_rates: array of mipi adapter clock rate
> + * @clock_num: actual clock number
> + */
> +struct adap_info {
> + char *clocks[MIPI_ADAP_CLOCK_NUM_MAX];
> + u32 clock_rates[MIPI_ADAP_CLOCK_NUM_MAX];
> + u32 clock_num;
> +};
> +
> +/*
> + * struct adap_device - mipi adapter platform device
> + *
> + * @dev: pointer to the struct device
> + * @top: mipi adapter top register address
> + * @fd: mipi adapter frontend register address
> + * @rd: mipi adapter reader register address
> + * @clks: array of MIPI adapter clocks
> + * @sd: mipi adapter sub-device
> + * @pads: mipi adapter sub-device pads
> + * @notifier: notifier to register on the v4l2-async API
> + * @src_sd: source sub-device
> + * @src_sd_pad: source sub-device pad
> + * @info: version-specific MIPI adapter information
> + */
> +struct adap_device {
> + struct device *dev;
> + void __iomem *top;
> + void __iomem *fd;
> + void __iomem *rd;
> + struct clk_bulk_data clks[MIPI_ADAP_CLOCK_NUM_MAX];
> +
> + struct v4l2_subdev sd;
> + struct media_pad pads[MIPI_ADAP_PAD_MAX];
> + struct v4l2_async_notifier notifier;
> + struct v4l2_subdev *src_sd;
> +
> + u16 src_sd_pad;
> + const struct adap_info *info;
> +};
> +
> +/* Format helpers */
> +
> +struct adap_pix_format {
> + u32 code;
> + u8 data_type;
> +};
> +
> +static const struct adap_pix_format c3_mipi_adap_formats[] = {
> + { MEDIA_BUS_FMT_SBGGR10_1X10, MIPI_CSI2_DT_RAW10 },
> + { MEDIA_BUS_FMT_SGBRG10_1X10, MIPI_CSI2_DT_RAW10 },
> + { MEDIA_BUS_FMT_SGRBG10_1X10, MIPI_CSI2_DT_RAW10 },
> + { MEDIA_BUS_FMT_SRGGB10_1X10, MIPI_CSI2_DT_RAW10 },
> + { MEDIA_BUS_FMT_SBGGR12_1X12, MIPI_CSI2_DT_RAW12 },
> + { MEDIA_BUS_FMT_SGBRG12_1X12, MIPI_CSI2_DT_RAW12 },
> + { MEDIA_BUS_FMT_SGRBG12_1X12, MIPI_CSI2_DT_RAW12 },
> + { MEDIA_BUS_FMT_SRGGB12_1X12, MIPI_CSI2_DT_RAW12 },
> +};
> +
> +static const struct adap_pix_format
> +*c3_mipi_adap_find_format(u32 code)
> +{
> + unsigned int i;
> +
> + for (i = 0; i < ARRAY_SIZE(c3_mipi_adap_formats); i++)
> + if (code == c3_mipi_adap_formats[i].code)
> + return &c3_mipi_adap_formats[i];
> +
> + return NULL;
> +}
> +
> +/* Hardware configuration */
> +
> +static void c3_mipi_adap_update_bits(struct adap_device *adap, u32 reg,
> + u32 mask, u32 val)
> +{
> + void __iomem *addr;
> + u32 orig, tmp;
> +
> + switch (ADAP_SUBMD(reg)) {
> + case SUBMD_TOP:
> + addr = adap->top + ADAP_REG_ADDR(reg);
> + break;
> + case SUBMD_FD:
> + addr = adap->fd + ADAP_REG_ADDR(reg);
> + break;
> + case SUBMD_RD:
> + addr = adap->rd + ADAP_REG_ADDR(reg);
> + break;
> + default:
> + dev_err(adap->dev, "Invalid sub-module: %lu\n", ADAP_SUBMD(reg));
> + return;
> + }
> +
> + orig = readl(addr);
> + tmp = orig & ~mask;
> + tmp |= val & mask;
> +
> + if (tmp != orig)
> + writel(tmp, addr);
> +}
> +
> +/* Configure adapter top sub module */
> +static void c3_mipi_adap_cfg_top(struct adap_device *adap)
> +{
> + /* Bypass decompress */
> + c3_mipi_adap_update_bits(adap, MIPI_ADAPT_DE_CTRL0,
> + MIPI_ADAPT_DE_CTRL0_RD_BUS_BYPASS_MASK,
> + MIPI_ADAPT_DE_CTRL0_RD_BUS_BYPASS_EN);
> + c3_mipi_adap_update_bits(adap, MIPI_ADAPT_DE_CTRL0,
> + MIPI_ADAPT_DE_CTRL0_WR_BUS_BYPASS_MASK,
> + MIPI_ADAPT_DE_CTRL0_WR_BUS_BYPASS_EN);
> +}
> +
> +/* Configure adapter frontend sub module */
> +static void c3_mipi_adap_cfg_frontend(struct adap_device *adap,
> + struct v4l2_mbus_framefmt *fmt)
> +{
> + /* Reset frontend module */
> + c3_mipi_adap_update_bits(adap, CSI2_CLK_RESET,
> + CSI2_CLK_RESET_SW_RESET_MASK, CSI2_CLK_RESET_SW_RESET_APPLY);
> + c3_mipi_adap_update_bits(adap, CSI2_CLK_RESET,
> + CSI2_CLK_RESET_SW_RESET_MASK, CSI2_CLK_RESET_SW_RESET_RELEASE);
> + c3_mipi_adap_update_bits(adap, CSI2_CLK_RESET,
> + CSI2_CLK_RESET_CLK_ENABLE_MASK, CSI2_CLK_RESET_CLK_ENABLE_EN);
> +
> + c3_mipi_adap_update_bits(adap, CSI2_X_START_END_ISP, CSI2_X_START_END_ISP_X_START_MASK,
> + CSI2_X_START_END_ISP_X_START(0));
> + c3_mipi_adap_update_bits(adap, CSI2_X_START_END_ISP, CSI2_X_START_END_ISP_X_END_MASK,
> + CSI2_X_START_END_ISP_X_END(fmt->width));
> +
> + c3_mipi_adap_update_bits(adap, CSI2_Y_START_END_ISP, CSI2_Y_START_END_ISP_Y_START_MASK,
> + CSI2_Y_START_END_ISP_Y_START(0));
> + c3_mipi_adap_update_bits(adap, CSI2_Y_START_END_ISP, CSI2_Y_START_END_ISP_Y_END_MASK,
> + CSI2_Y_START_END_ISP_Y_END(fmt->height));
> +
> + /* Select VS and HS signal for direct path */
> + c3_mipi_adap_update_bits(adap, CSI2_VC_MODE, CSI2_VC_MODE_VS_ISP_SEL_VC_MASK,
> + CSI2_VC_MODE_VS_ISP_SEL_VC_0);
> + c3_mipi_adap_update_bits(adap, CSI2_VC_MODE, CSI2_VC_MODE_HS_ISP_SEL_VC_MASK,
> + CSI2_VC_MODE_HS_ISP_SEL_VC_0);
> +
> + /* Enable to receive RAW packet */
> + c3_mipi_adap_update_bits(adap, CSI2_GEN_CTRL0, CSI2_GEN_CTRL0_ENABLE_PACKETS_MASK,
> + CSI2_GEN_CTRL0_ENABLE_PACKETS_RAW);
> +
> + /* Enable virtual channel 0 */
> + c3_mipi_adap_update_bits(adap, CSI2_GEN_CTRL0,
> + CSI2_GEN_CTRL0_VC0_MASK, CSI2_GEN_CTRL0_VC0_EN);
> +}
> +
> +static void c3_mipi_adap_cfg_rd0(struct adap_device *adap)
> +{
> + /* Select direct mode for DDR_RD0 mode */
> + c3_mipi_adap_update_bits(adap, MIPI_ADAPT_DDR_RD0_CNTL1,
> + MIPI_ADAPT_DDR_RD0_CNTL1_PORT_SEL_MASK,
> + MIPI_ADAPT_DDR_RD0_CNTL1_PORT_SEL_DIRECT_MODE);
> +
> + /*
> + * Data can't bypass DDR_RD0 in direct mode,
> + * so need to enable DDR_RD0 module here.
> + */
Please reflow to 80 cols
> + c3_mipi_adap_update_bits(adap, MIPI_ADAPT_DDR_RD0_CNTL0,
> + MIPI_ADAPT_DDR_RD0_CNTL0_MODULE_EN_MASK,
> + MIPI_ADAPT_DDR_RD0_CNTL0_MODULE_EN);
> +}
> +
> +static void c3_mipi_adap_cfg_pixel0(struct adap_device *adap,
> + struct v4l2_mbus_framefmt *fmt)
> +{
> + const struct adap_pix_format *pix_fmt;
> +
> + pix_fmt = c3_mipi_adap_find_format(fmt->code);
> +
> + /* Set work mode and data type for PIXEL0 module */
> + c3_mipi_adap_update_bits(adap, MIPI_ADAPT_PIXEL0_CNTL0,
> + MIPI_ADAPT_PIXEL0_CNTL0_WORK_MODE_MASK,
> + MIPI_ADAPT_PIXEL0_CNTL0_WORK_MODE_RAW_DIRECT_PATH);
> + c3_mipi_adap_update_bits(adap, MIPI_ADAPT_PIXEL0_CNTL0,
> + MIPI_ADAPT_PIXEL0_CNTL0_DATA_TYPE_MASK,
> + MIPI_ADAPT_PIXEL0_CNTL0_DATA_TYPE(pix_fmt->data_type));
> +
> + /* Start PIXEL0 module */
> + c3_mipi_adap_update_bits(adap, MIPI_ADAPT_PIXEL0_CNTL0,
> + MIPI_ADAPT_PIXEL0_CNTL0_START_EN_MASK,
> + MIPI_ADAPT_PIXEL0_CNTL0_START_EN);
> +}
> +
> +static void c3_mipi_adap_cfg_alig(struct adap_device *adap,
> + struct v4l2_mbus_framefmt *fmt)
> +{
> + /*
> + * ISP hardware requires the number of horizonal blanks
> + * greater than 64 cycles, so adding 72 here.
if it requires 64, why adding 72 ? :)
> + */
> + c3_mipi_adap_update_bits(adap, MIPI_ADAPT_ALIG_CNTL0,
> + MIPI_ADAPT_ALIG_CNTL0_H_TOTAL_NUM_MASK,
> + MIPI_ADAPT_ALIG_CNTL0_H_TOTAL_NUM(fmt->width + 72));
> + /*
> + * ISP hardware requires the number of vertical blanks
> + * greater than 40 lines, so adding 48 here.
This can be reflowed as well, and same question, if it need 40 why 48?
> + */
> + c3_mipi_adap_update_bits(adap, MIPI_ADAPT_ALIG_CNTL0,
> + MIPI_ADAPT_ALIG_CNTL0_V_TOTAL_NUM_MASK,
> + MIPI_ADAPT_ALIG_CNTL0_V_TOTAL_NUM(fmt->height + 48));
> +
> + /* End pixel in a line */
> + c3_mipi_adap_update_bits(adap, MIPI_ADAPT_ALIG_CNTL1,
> + MIPI_ADAPT_ALIG_CNTL1_HPE_NUM_MASK,
> + MIPI_ADAPT_ALIG_CNTL1_HPE_NUM(fmt->width));
> +
> + /* End line in a frame */
> + c3_mipi_adap_update_bits(adap, MIPI_ADAPT_ALIG_CNTL2,
> + MIPI_ADAPT_ALIG_CNTL2_VPE_NUM_MASK,
> + MIPI_ADAPT_ALIG_CNTL2_VPE_NUM(fmt->height));
> +
> + c3_mipi_adap_update_bits(adap, MIPI_ADAPT_ALIG_CNTL6,
> + MIPI_ADAPT_ALIG_CNTL6_PATH0_EN_MASK,
> + MIPI_ADAPT_ALIG_CNTL6_PATH0_EN);
> +
> + /* Select direct mode for ALIG module */
> + c3_mipi_adap_update_bits(adap, MIPI_ADAPT_ALIG_CNTL6,
> + MIPI_ADAPT_ALIG_CNTL6_PIX0_DATA_MODE_MASK,
> + MIPI_ADAPT_ALIG_CNTL6_PIX0_DATA_MODE_DIRECT);
> +
> + /* Enable to send raw data */
> + c3_mipi_adap_update_bits(adap, MIPI_ADAPT_ALIG_CNTL6,
> + MIPI_ADAPT_ALIG_CNTL6_DATA0_EN_MASK,
> + MIPI_ADAPT_ALIG_CNTL6_DATA0_EN);
> +
> + /* Set continue mode and disable hold counter */
> + c3_mipi_adap_update_bits(adap, MIPI_ADAPT_ALIG_CNTL8,
> + MIPI_ADAPT_ALIG_CNTL8_FRMAE_CONTINUE_MASK,
> + MIPI_ADAPT_ALIG_CNTL8_FRMAE_CONTINUE_EN);
> + c3_mipi_adap_update_bits(adap, MIPI_ADAPT_ALIG_CNTL8,
> + MIPI_ADAPT_ALIG_CNTL8_EXCEED_DIS_MASK,
> + MIPI_ADAPT_ALIG_CNTL8_EXCEED_NOT_HOLD);
> +
> + /* Start ALIG module */
> + c3_mipi_adap_update_bits(adap, MIPI_ADAPT_ALIG_CNTL8,
> + MIPI_ADAPT_ALIG_CNTL8_START_EN_MASK,
> + MIPI_ADAPT_ALIG_CNTL8_START_EN);
> +}
> +
> +/* V4L2 subdev operations */
> +
> +static int c3_mipi_adap_enable_streams(struct v4l2_subdev *sd,
> + struct v4l2_subdev_state *state,
> + u32 pad, u64 streams_mask)
> +{
> + struct adap_device *adap = v4l2_get_subdevdata(sd);
> + struct v4l2_mbus_framefmt *fmt;
> + u64 sink_streams;
> + int ret;
> +
> + pm_runtime_resume_and_get(adap->dev);
> +
> + fmt = v4l2_subdev_state_get_format(state, MIPI_ADAP_PAD_SINK);
> +
> + c3_mipi_adap_cfg_top(adap);
> + c3_mipi_adap_cfg_frontend(adap, fmt);
> + c3_mipi_adap_cfg_rd0(adap);
> + c3_mipi_adap_cfg_pixel0(adap, fmt);
> + c3_mipi_adap_cfg_alig(adap, fmt);
> +
> + sink_streams = v4l2_subdev_state_xlate_streams(state, pad,
> + MIPI_ADAP_PAD_SINK,
> + &streams_mask);
Same comment as the previous patch, you have no streams, so you can
assume stream#0 on the source subdev
> + ret = v4l2_subdev_enable_streams(adap->src_sd,
> + adap->src_sd_pad,
> + sink_streams);
> + if (ret) {
> + pm_runtime_put(adap->dev);
> + return ret;
> + }
> +
> + return 0;
> +}
> +
> +static int c3_mipi_adap_disable_streams(struct v4l2_subdev *sd,
> + struct v4l2_subdev_state *state,
> + u32 pad, u64 streams_mask)
> +{
> + struct adap_device *adap = v4l2_get_subdevdata(sd);
> + u64 sink_streams;
> + int ret;
> +
> + sink_streams = v4l2_subdev_state_xlate_streams(state, pad,
> + MIPI_ADAP_PAD_SINK,
> + &streams_mask);
ditto
> + ret = v4l2_subdev_disable_streams(adap->src_sd,
> + adap->src_sd_pad,
> + sink_streams);
> + if (ret)
> + dev_err(adap->dev, "Failed to disable %s\n", adap->src_sd->name);
> +
> + pm_runtime_put(adap->dev);
> +
> + return ret;
> +}
> +
> +static int c3_mipi_adap_cfg_routing(struct v4l2_subdev *sd,
> + struct v4l2_subdev_state *state,
> + struct v4l2_subdev_krouting *routing)
> +{
You should remove routing support
> + static const struct v4l2_mbus_framefmt format = {
> + .width = MIPI_ADAP_DEFAULT_WIDTH,
> + .height = MIPI_ADAP_DEFAULT_HEIGHT,
> + .code = MIPI_ADAP_DEFAULT_FMT,
> + .field = V4L2_FIELD_NONE,
> + .colorspace = V4L2_COLORSPACE_RAW,
> + .ycbcr_enc = V4L2_YCBCR_ENC_601,
> + .quantization = V4L2_QUANTIZATION_LIM_RANGE,
> + .xfer_func = V4L2_XFER_FUNC_NONE,
> + };
> + int ret;
> +
> + ret = v4l2_subdev_routing_validate(sd, routing,
> + V4L2_SUBDEV_ROUTING_ONLY_1_TO_1);
> + if (ret)
> + return ret;
> +
> + ret = v4l2_subdev_set_routing_with_fmt(sd, state, routing, &format);
> + if (ret)
> + return ret;
> +
> + return 0;
> +}
> +
> +static int c3_mipi_adap_init_routing(struct v4l2_subdev *sd,
> + struct v4l2_subdev_state *state)
> +{
> + struct v4l2_subdev_route routes;
> + struct v4l2_subdev_krouting routing;
> +
> + routes.sink_pad = MIPI_ADAP_PAD_SINK;
> + routes.sink_stream = 0;
> + routes.source_pad = MIPI_ADAP_PAD_SRC;
> + routes.source_stream = 0;
> + routes.flags = V4L2_SUBDEV_ROUTE_FL_ACTIVE;
> +
> + routing.num_routes = 1;
> + routing.routes = &routes;
> +
> + return c3_mipi_adap_cfg_routing(sd, state, &routing);
> +}
> +
> +static int c3_mipi_adap_enum_mbus_code(struct v4l2_subdev *sd,
> + struct v4l2_subdev_state *state,
> + struct v4l2_subdev_mbus_code_enum *code)
> +{
> + switch (code->pad) {
> + case MIPI_ADAP_PAD_SINK:
> + if (code->index >= ARRAY_SIZE(c3_mipi_adap_formats))
> + return -EINVAL;
> +
> + code->code = c3_mipi_adap_formats[code->index].code;
> + break;
> + case MIPI_ADAP_PAD_SRC:
> + struct v4l2_mbus_framefmt *fmt;
> +
> + if (code->index)
> + return -EINVAL;
> +
> + fmt = v4l2_subdev_state_get_format(state, code->pad);
> + code->code = fmt->code;
> + break;
> + default:
> + return -EINVAL;
> + }
> +
> + return 0;
> +}
> +
> +static int c3_mipi_adap_set_fmt(struct v4l2_subdev *sd,
> + struct v4l2_subdev_state *state,
> + struct v4l2_subdev_format *format)
> +{
> + struct v4l2_mbus_framefmt *fmt;
> + const struct adap_pix_format *pix_format;
> +
> + if (format->pad != MIPI_ADAP_PAD_SINK)
> + return v4l2_subdev_get_fmt(sd, state, format);
> +
> + pix_format = c3_mipi_adap_find_format(format->format.code);
> + if (!pix_format)
> + pix_format = &c3_mipi_adap_formats[0];
> +
> + fmt = v4l2_subdev_state_get_format(state, format->pad);
> + fmt->code = pix_format->code;
> + fmt->width = clamp_t(u32, format->format.width,
> + MIPI_ADAP_MIN_WIDTH, MIPI_ADAP_MAX_WIDTH);
> + fmt->height = clamp_t(u32, format->format.height,
> + MIPI_ADAP_MIN_HEIGHT, MIPI_ADAP_MAX_HEIGHT);
> +
> + format->format = *fmt;
> +
> + /* Synchronize the format to source pad */
> + fmt = v4l2_subdev_state_get_format(state, MIPI_ADAP_PAD_SRC);
> + *fmt = format->format;
> +
> + return 0;
> +}
> +
> +static int c3_mipi_adap_init_state(struct v4l2_subdev *sd,
> + struct v4l2_subdev_state *state)
> +{
> + struct v4l2_mbus_framefmt *sink_fmt;
> + struct v4l2_mbus_framefmt *src_fmt;
> +
> + sink_fmt = v4l2_subdev_state_get_format(state, MIPI_ADAP_PAD_SINK);
> + src_fmt = v4l2_subdev_state_get_format(state, MIPI_ADAP_PAD_SRC);
> +
> + sink_fmt->width = MIPI_ADAP_DEFAULT_WIDTH;
> + sink_fmt->height = MIPI_ADAP_DEFAULT_HEIGHT;
> + sink_fmt->field = V4L2_FIELD_NONE;
> + sink_fmt->code = MIPI_ADAP_DEFAULT_FMT;
> + sink_fmt->colorspace = V4L2_COLORSPACE_RAW;
> + sink_fmt->xfer_func = V4L2_XFER_FUNC_NONE;
> + sink_fmt->ycbcr_enc = V4L2_YCBCR_ENC_601;
> + sink_fmt->quantization = V4L2_QUANTIZATION_FULL_RANGE;
> +
> + *src_fmt = *sink_fmt;
> +
> + return c3_mipi_adap_init_routing(sd, state);
> +}
> +
> +static const struct v4l2_subdev_pad_ops c3_mipi_adap_pad_ops = {
> + .enum_mbus_code = c3_mipi_adap_enum_mbus_code,
> + .get_fmt = v4l2_subdev_get_fmt,
> + .set_fmt = c3_mipi_adap_set_fmt,
> + .enable_streams = c3_mipi_adap_enable_streams,
> + .disable_streams = c3_mipi_adap_disable_streams,
> +};
> +
> +static const struct v4l2_subdev_ops c3_mipi_adap_subdev_ops = {
> + .pad = &c3_mipi_adap_pad_ops,
> +};
> +
> +static const struct v4l2_subdev_internal_ops c3_mipi_adap_internal_ops = {
> + .init_state = c3_mipi_adap_init_state,
> +};
> +
> +/* Media entity operations */
> +static const struct media_entity_operations c3_mipi_adap_entity_ops = {
> + .link_validate = v4l2_subdev_link_validate,
> +};
> +
> +/* PM runtime */
> +
> +static int c3_mipi_adap_runtime_suspend(struct device *dev)
> +{
> + struct adap_device *adap = dev_get_drvdata(dev);
> +
> + clk_bulk_disable_unprepare(adap->info->clock_num, adap->clks);
> +
> + return 0;
> +}
> +
> +static int c3_mipi_adap_runtime_resume(struct device *dev)
> +{
> + struct adap_device *adap = dev_get_drvdata(dev);
> +
> + return clk_bulk_prepare_enable(adap->info->clock_num, adap->clks);
> +}
> +
> +static const struct dev_pm_ops c3_mipi_adap_pm_ops = {
> + SYSTEM_SLEEP_PM_OPS(pm_runtime_force_suspend,
> + pm_runtime_force_resume)
> + RUNTIME_PM_OPS(c3_mipi_adap_runtime_suspend,
> + c3_mipi_adap_runtime_resume, NULL)
> +};
> +
> +/* Probe/remove & platform driver */
> +
> +static int c3_mipi_adap_subdev_init(struct adap_device *adap)
> +{
> + struct v4l2_subdev *sd = &adap->sd;
> + int ret;
> +
> + v4l2_subdev_init(sd, &c3_mipi_adap_subdev_ops);
> + sd->owner = THIS_MODULE;
> + sd->flags |= V4L2_SUBDEV_FL_HAS_DEVNODE;
> + sd->internal_ops = &c3_mipi_adap_internal_ops;
> + snprintf(sd->name, sizeof(sd->name), "%s", MIPI_ADAP_SUBDEV_NAME);
> +
> + sd->entity.function = MEDIA_ENT_F_VID_IF_BRIDGE;
> + sd->entity.ops = &c3_mipi_adap_entity_ops;
> +
> + sd->dev = adap->dev;
> + v4l2_set_subdevdata(sd, adap);
> +
> + adap->pads[MIPI_ADAP_PAD_SINK].flags = MEDIA_PAD_FL_SINK;
> + adap->pads[MIPI_ADAP_PAD_SRC].flags = MEDIA_PAD_FL_SOURCE;
> + ret = media_entity_pads_init(&sd->entity, MIPI_ADAP_PAD_MAX, adap->pads);
> + if (ret)
> + return ret;
> +
> + ret = v4l2_subdev_init_finalize(sd);
> + if (ret) {
> + media_entity_cleanup(&sd->entity);
> + return ret;
> + }
> +
> + return 0;
> +}
> +
> +static void c3_mipi_adap_subdev_deinit(struct adap_device *adap)
> +{
> + v4l2_subdev_cleanup(&adap->sd);
> + media_entity_cleanup(&adap->sd.entity);
> +}
> +
> +/* Subdev notifier register */
> +static int c3_mipi_adap_notify_bound(struct v4l2_async_notifier *notifier,
> + struct v4l2_subdev *sd,
> + struct v4l2_async_connection *asc)
> +{
> + struct adap_device *adap = v4l2_get_subdevdata(notifier->sd);
> + struct media_pad *sink = &adap->sd.entity.pads[MIPI_ADAP_PAD_SINK];
> + int ret;
> +
> + ret = media_entity_get_fwnode_pad(&sd->entity,
> + sd->fwnode, MEDIA_PAD_FL_SOURCE);
> + if (ret < 0) {
> + dev_err(adap->dev, "Failed to find pad for %s\n", sd->name);
> + return ret;
> + }
> +
> + adap->src_sd = sd;
> + adap->src_sd_pad = ret;
> +
> + return v4l2_create_fwnode_links_to_pad(sd, sink, MEDIA_LNK_FL_ENABLED |
> + MEDIA_LNK_FL_IMMUTABLE);
> +}
> +
> +static const struct v4l2_async_notifier_operations c3_mipi_adap_notify_ops = {
> + .bound = c3_mipi_adap_notify_bound,
> +};
> +
> +static int c3_mipi_adap_async_register(struct adap_device *adap)
> +{
> + struct v4l2_async_connection *asc;
> + struct fwnode_handle *ep;
> + int ret;
> +
> + v4l2_async_subdev_nf_init(&adap->notifier, &adap->sd);
> +
> + ep = fwnode_graph_get_endpoint_by_id(dev_fwnode(adap->dev), 0, 0,
> + FWNODE_GRAPH_ENDPOINT_NEXT);
> + if (!ep)
> + return -ENOTCONN;
> +
> + asc = v4l2_async_nf_add_fwnode_remote(&adap->notifier, ep,
> + struct v4l2_async_connection);
> + if (IS_ERR(asc)) {
> + ret = PTR_ERR(asc);
> + goto err_put_handle;
> + }
> +
> + adap->notifier.ops = &c3_mipi_adap_notify_ops;
> + ret = v4l2_async_nf_register(&adap->notifier);
> + if (ret)
> + goto err_cleanup_nf;
> +
> + ret = v4l2_async_register_subdev(&adap->sd);
> + if (ret)
> + goto err_unregister_nf;
> +
> + fwnode_handle_put(ep);
> +
> + return 0;
> +
> +err_unregister_nf:
> + v4l2_async_nf_unregister(&adap->notifier);
> +err_cleanup_nf:
> + v4l2_async_nf_cleanup(&adap->notifier);
> +err_put_handle:
> + fwnode_handle_put(ep);
> + return ret;
> +}
> +
> +static void c3_mipi_adap_async_unregister(struct adap_device *adap)
> +{
> + v4l2_async_unregister_subdev(&adap->sd);
> + v4l2_async_nf_unregister(&adap->notifier);
> + v4l2_async_nf_cleanup(&adap->notifier);
> +}
> +
> +static int c3_mipi_adap_ioremap_resource(struct adap_device *adap)
> +{
> + struct device *dev = adap->dev;
> + struct platform_device *pdev = to_platform_device(dev);
> +
> + adap->top = devm_platform_ioremap_resource_byname(pdev, "top");
> + if (IS_ERR(adap->top))
> + return PTR_ERR(adap->top);
> +
> + adap->fd = devm_platform_ioremap_resource_byname(pdev, "fd");
> + if (IS_ERR(adap->fd))
> + return PTR_ERR(adap->fd);
> +
> + adap->rd = devm_platform_ioremap_resource_byname(pdev, "rd");
> + if (IS_ERR(adap->rd))
> + return PTR_ERR(adap->rd);
> +
> + return 0;
> +}
> +
> +static int c3_mipi_adap_configure_clocks(struct adap_device *adap)
> +{
> + const struct adap_info *info = adap->info;
> + int ret;
> + u32 i;
> +
> + for (i = 0; i < info->clock_num; i++)
> + adap->clks[i].id = info->clocks[i];
> +
> + ret = devm_clk_bulk_get(adap->dev, info->clock_num, adap->clks);
> + if (ret)
> + return ret;
> +
> + for (i = 0; i < info->clock_num; i++) {
> + if (!info->clock_rates[i])
> + continue;
Same comments, maybe add one empty line here
> + ret = clk_set_rate(adap->clks[i].clk, info->clock_rates[i]);
> + if (ret) {
and I wonder if you should bulk_release here
The rest looks good!
Thanks
j
> + dev_err(adap->dev, "Failed to set %s rate %u\n", info->clocks[i],
> + info->clock_rates[i]);
> + return ret;
> + }
> + }
> +
> + return 0;
> +}
> +
> +static int c3_mipi_adap_probe(struct platform_device *pdev)
> +{
> + struct device *dev = &pdev->dev;
> + struct adap_device *adap;
> + int ret;
> +
> + adap = devm_kzalloc(dev, sizeof(*adap), GFP_KERNEL);
> + if (!adap)
> + return -ENOMEM;
> +
> + adap->info = of_device_get_match_data(dev);
> + adap->dev = dev;
> +
> + ret = c3_mipi_adap_ioremap_resource(adap);
> + if (ret)
> + return dev_err_probe(dev, ret, "Failed to ioremap resource\n");
> +
> + ret = c3_mipi_adap_configure_clocks(adap);
> + if (ret)
> + return dev_err_probe(dev, ret, "Failed to configure clocks\n");
> +
> + platform_set_drvdata(pdev, adap);
> +
> + pm_runtime_enable(dev);
> +
> + ret = c3_mipi_adap_subdev_init(adap);
> + if (ret < 0)
> + goto err_disable_runtime_pm;
> +
> + ret = c3_mipi_adap_async_register(adap);
> + if (ret < 0)
> + goto err_deinit_subdev;
> +
> + return 0;
> +
> +err_deinit_subdev:
> + c3_mipi_adap_subdev_deinit(adap);
> +err_disable_runtime_pm:
> + pm_runtime_disable(dev);
> + return ret;
> +};
> +
> +static void c3_mipi_adap_remove(struct platform_device *pdev)
> +{
> + struct adap_device *adap = platform_get_drvdata(pdev);
> +
> + c3_mipi_adap_async_unregister(adap);
> + c3_mipi_adap_subdev_deinit(adap);
> +
> + pm_runtime_disable(&pdev->dev);
> +};
> +
> +static const struct adap_info c3_mipi_adap_info = {
> + .clocks = {"vapb", "isp0"},
> + .clock_rates = {0, 400000000},
> + .clock_num = 2
> +};
> +
> +static const struct of_device_id c3_mipi_adap_of_match[] = {
> + { .compatible = "amlogic,c3-mipi-adapter",
> + .data = &c3_mipi_adap_info },
> + { },
> +};
> +MODULE_DEVICE_TABLE(of, c3_mipi_adap_of_match);
> +
> +static struct platform_driver c3_mipi_adap_driver = {
> + .probe = c3_mipi_adap_probe,
> + .remove = c3_mipi_adap_remove,
> + .driver = {
> + .name = "c3-mipi-adapter",
> + .of_match_table = c3_mipi_adap_of_match,
> + .pm = pm_ptr(&c3_mipi_adap_pm_ops),
> + },
> +};
> +
> +module_platform_driver(c3_mipi_adap_driver);
> +
> +MODULE_AUTHOR("Keke Li <keke.li@...ogic.com>");
> +MODULE_DESCRIPTION("Amlogic C3 MIPI adapter");
> +MODULE_LICENSE("GPL");
>
> --
> 2.47.0
>
>
>
Powered by blists - more mailing lists