| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20241211-aaeon-up-board-pinctrl-support-v1-3-24719be27631@bootlin.com>
Date: Wed, 11 Dec 2024 17:27:18 +0100
From: Thomas Richard <thomas.richard@...tlin.com>
To: Linus Walleij <linus.walleij@...aro.org>,
Bartosz Golaszewski <brgl@...ev.pl>, Lee Jones <lee@...nel.org>,
Pavel Machek <pavel@....cz>
Cc: linux-gpio@...r.kernel.org, linux-kernel@...r.kernel.org,
linux-leds@...r.kernel.org, thomas.petazzoni@...tlin.com,
DanieleCleri@...on.eu, GaryWang@...on.com.tw,
Thomas Richard <thomas.richard@...tlin.com>
Subject: [PATCH 3/5] gpiolib: add gpiochip_add_pinlist_range() function
Add gpiochip_add_pinlist_range() function to add a range for GPIO <-> pin
mapping, using a list of non consecutive pins.
Previously, it was only possible to add range of consecutive pins using
gpiochip_add_pin_range().
The struct pinctrl_gpio_range has a 'pins' member which allows to set a
list of pins (which can be non consecutive). gpiochip_add_pinlist_range()
is identical to gpiochip_add_pin_range(), except it set 'pins' member
instead of 'pin_base' member.
Signed-off-by: Thomas Richard <thomas.richard@...tlin.com>
---
drivers/gpio/gpiolib.c | 74 +++++++++++++++++++++++++++++++++------------
include/linux/gpio/driver.h | 12 ++++++++
2 files changed, 66 insertions(+), 20 deletions(-)
diff --git a/drivers/gpio/gpiolib.c b/drivers/gpio/gpiolib.c
index 3c8ec7f3a83b..e0fe07167e62 100644
--- a/drivers/gpio/gpiolib.c
+++ b/drivers/gpio/gpiolib.c
@@ -2227,26 +2227,9 @@ int gpiochip_add_pingroup_range(struct gpio_chip *gc,
}
EXPORT_SYMBOL_GPL(gpiochip_add_pingroup_range);
-/**
- * gpiochip_add_pin_range() - add a range for GPIO <-> pin mapping
- * @gc: the gpiochip to add the range for
- * @pinctl_name: the dev_name() of the pin controller to map to
- * @gpio_offset: the start offset in the current gpio_chip number space
- * @pin_offset: the start offset in the pin controller number space
- * @npins: the number of pins from the offset of each pin space (GPIO and
- * pin controller) to accumulate in this range
- *
- * Calling this function directly from a DeviceTree-supported
- * pinctrl driver is DEPRECATED. Please see Section 2.1 of
- * Documentation/devicetree/bindings/gpio/gpio.txt on how to
- * bind pinctrl and gpio drivers via the "gpio-ranges" property.
- *
- * Returns:
- * 0 on success, or a negative errno on failure.
- */
-int gpiochip_add_pin_range(struct gpio_chip *gc, const char *pinctl_name,
- unsigned int gpio_offset, unsigned int pin_offset,
- unsigned int npins)
+static int __gpiochip_add_pin_range(struct gpio_chip *gc, const char *pinctl_name,
+ unsigned int gpio_offset, unsigned int pin_offset,
+ unsigned int const *pins, unsigned int npins)
{
struct gpio_pin_range *pin_range;
struct gpio_device *gdev = gc->gpiodev;
@@ -2264,6 +2247,7 @@ int gpiochip_add_pin_range(struct gpio_chip *gc, const char *pinctl_name,
pin_range->range.name = gc->label;
pin_range->range.base = gdev->base + gpio_offset;
pin_range->range.pin_base = pin_offset;
+ pin_range->range.pins = pins;
pin_range->range.npins = npins;
pin_range->pctldev = pinctrl_find_and_add_gpio_range(pinctl_name,
&pin_range->range);
@@ -2282,8 +2266,58 @@ int gpiochip_add_pin_range(struct gpio_chip *gc, const char *pinctl_name,
return 0;
}
+
+/**
+ * gpiochip_add_pin_range() - add a range for GPIO <-> pin mapping
+ * @gc: the gpiochip to add the range for
+ * @pinctl_name: the dev_name() of the pin controller to map to
+ * @gpio_offset: the start offset in the current gpio_chip number space
+ * @pin_offset: the start offset in the pin controller number space
+ * @npins: the number of pins from the offset of each pin space (GPIO and
+ * pin controller) to accumulate in this range
+ *
+ * Calling this function directly from a DeviceTree-supported
+ * pinctrl driver is DEPRECATED. Please see Section 2.1 of
+ * Documentation/devicetree/bindings/gpio/gpio.txt on how to
+ * bind pinctrl and gpio drivers via the "gpio-ranges" property.
+ *
+ * Returns:
+ * 0 on success, or a negative errno on failure.
+ */
+int gpiochip_add_pin_range(struct gpio_chip *gc, const char *pinctl_name,
+ unsigned int gpio_offset, unsigned int pin_offset,
+ unsigned int npins)
+{
+ return __gpiochip_add_pin_range(gc, pinctl_name, gpio_offset,
+ pin_offset, NULL, npins);
+}
EXPORT_SYMBOL_GPL(gpiochip_add_pin_range);
+/**
+ * gpiochip_add_pinlist_range() - add a range for GPIO <-> pin mapping
+ * @gc: the gpiochip to add the range for
+ * @pinctl_name: the dev_name() of the pin controller to map to
+ * @gpio_offset: the start offset in the current gpio_chip number space
+ * @pin_list: the list of pins to accumulate in this range
+ * @npins: the number of pins to accumulate in this range
+ *
+ * Calling this function directly from a DeviceTree-supported
+ * pinctrl driver is DEPRECATED. Please see Section 2.1 of
+ * Documentation/devicetree/bindings/gpio/gpio.txt on how to
+ * bind pinctrl and gpio drivers via the "gpio-ranges" property.
+ *
+ * Returns:
+ * 0 on success, or a negative errno on failure.
+ */
+int gpiochip_add_pinlist_range(struct gpio_chip *gc, const char *pinctl_name,
+ unsigned int gpio_offset, unsigned int const *pins,
+ unsigned int npins)
+{
+ return __gpiochip_add_pin_range(gc, pinctl_name, gpio_offset, 0, pins,
+ npins);
+}
+EXPORT_SYMBOL_GPL(gpiochip_add_pinlist_range);
+
/**
* gpiochip_remove_pin_ranges() - remove all the GPIO <-> pin mappings
* @gc: the chip to remove all the mappings for
diff --git a/include/linux/gpio/driver.h b/include/linux/gpio/driver.h
index 2dd7cb9cc270..8037f9a1e2a9 100644
--- a/include/linux/gpio/driver.h
+++ b/include/linux/gpio/driver.h
@@ -751,6 +751,9 @@ struct gpio_pin_range {
int gpiochip_add_pin_range(struct gpio_chip *gc, const char *pinctl_name,
unsigned int gpio_offset, unsigned int pin_offset,
unsigned int npins);
+int gpiochip_add_pinlist_range(struct gpio_chip *gc, const char *pinctl_name,
+ unsigned int gpio_offset, unsigned int const *pins,
+ unsigned int npins);
int gpiochip_add_pingroup_range(struct gpio_chip *gc,
struct pinctrl_dev *pctldev,
unsigned int gpio_offset, const char *pin_group);
@@ -765,6 +768,15 @@ gpiochip_add_pin_range(struct gpio_chip *gc, const char *pinctl_name,
{
return 0;
}
+
+static inline int
+gpiochip_add_pinlist_range(struct gpio_chip *gc, const char *pinctl_name,
+ unsigned int gpio_offset, unsigned int const *pins,
+ unsigned int npins)
+{
+ return 0;
+}
+
static inline int
gpiochip_add_pingroup_range(struct gpio_chip *gc,
struct pinctrl_dev *pctldev,
--
2.39.5
Powered by blists - more mailing lists