| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20241211-ufs-qcom-suspend-fix-v1-1-83ebbde76b1c@linaro.org>
Date: Wed, 11 Dec 2024 23:10:16 +0530
From: Manivannan Sadhasivam via B4 Relay <devnull+manivannan.sadhasivam.linaro.org@...nel.org>
To: Alim Akhtar <alim.akhtar@...sung.com>,
Avri Altman <avri.altman@....com>, Bart Van Assche <bvanassche@....org>,
"James E.J. Bottomley" <James.Bottomley@...senPartnership.com>,
"Martin K. Petersen" <martin.petersen@...cle.com>,
Abel Vesa <abel.vesa@...aro.org>, Bjorn Andersson <andersson@...nel.org>,
Neil Armstrong <neil.armstrong@...aro.org>,
Konrad Dybcio <konradybcio@...nel.org>
Cc: linux-scsi@...r.kernel.org, linux-kernel@...r.kernel.org,
linux-arm-msm@...r.kernel.org, Amit Pundir <amit.pundir@...aro.org>,
Nitin Rawat <quic_nitirawa@...cinc.com>,
Manivannan Sadhasivam <manivannan.sadhasivam@...aro.org>,
stable@...r.kernel.org, Ram Kumar Dwivedi <quic_rdwivedi@...cinc.com>
Subject: [PATCH 1/3] scsi: ufs: qcom: Power off the PHY if it was already
powered on in ufs_qcom_power_up_sequence()
From: Manivannan Sadhasivam <manivannan.sadhasivam@...aro.org>
PHY might already be powered on during ufs_qcom_power_up_sequence() in a
couple of cases:
1. During UFSHCD_QUIRK_REINIT_AFTER_MAX_GEAR_SWITCH quirk
2. Resuming from spm_lvl = 5 suspend
In those cases, it is necessary to call phy_power_off() and phy_exit() in
ufs_qcom_power_up_sequence() function to power off the PHY before calling
phy_init() and phy_power_on().
Case (1) is doing it via ufs_qcom_reinit_notify() callback, but case (2) is
not handled. So to satisfy both cases, call phy_power_off() and phy_exit()
if the phy_count is non-zero. And with this change, the reinit_notify()
callback is no longer needed.
This fixes the below UFS resume failure with spm_lvl = 5:
ufshcd-qcom 1d84000.ufshc: Enabling the controller failed
ufshcd-qcom 1d84000.ufshc: Enabling the controller failed
ufshcd-qcom 1d84000.ufshc: Enabling the controller failed
ufshcd-qcom 1d84000.ufshc: ufshcd_host_reset_and_restore: Host init failed -5
ufshcd-qcom 1d84000.ufshc: Enabling the controller failed
ufshcd-qcom 1d84000.ufshc: Enabling the controller failed
ufshcd-qcom 1d84000.ufshc: Enabling the controller failed
ufshcd-qcom 1d84000.ufshc: ufshcd_host_reset_and_restore: Host init failed -5
ufshcd-qcom 1d84000.ufshc: Enabling the controller failed
ufshcd-qcom 1d84000.ufshc: Enabling the controller failed
ufshcd-qcom 1d84000.ufshc: Enabling the controller failed
ufshcd-qcom 1d84000.ufshc: ufshcd_host_reset_and_restore: Host init failed -5
ufshcd-qcom 1d84000.ufshc: Enabling the controller failed
ufshcd-qcom 1d84000.ufshc: Enabling the controller failed
ufshcd-qcom 1d84000.ufshc: Enabling the controller failed
ufshcd-qcom 1d84000.ufshc: ufshcd_host_reset_and_restore: Host init failed -5
ufshcd-qcom 1d84000.ufshc: Enabling the controller failed
ufshcd-qcom 1d84000.ufshc: Enabling the controller failed
ufshcd-qcom 1d84000.ufshc: Enabling the controller failed
ufshcd-qcom 1d84000.ufshc: ufshcd_host_reset_and_restore: Host init failed -5
ufs_device_wlun 0:0:0:49488: ufshcd_wl_resume failed: -5
ufs_device_wlun 0:0:0:49488: PM: dpm_run_callback(): scsi_bus_resume returns -5
ufs_device_wlun 0:0:0:49488: PM: failed to resume async: error -5
Cc: stable@...r.kernel.org # 6.3
Fixes: baf5ddac90dc ("scsi: ufs: ufs-qcom: Add support for reinitializing the UFS device")
Reported-by: Ram Kumar Dwivedi <quic_rdwivedi@...cinc.com>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@...aro.org>
---
drivers/ufs/core/ufshcd-priv.h | 6 ------
drivers/ufs/core/ufshcd.c | 1 -
drivers/ufs/host/ufs-qcom.c | 13 +++++--------
include/ufs/ufshcd.h | 2 --
4 files changed, 5 insertions(+), 17 deletions(-)
diff --git a/drivers/ufs/core/ufshcd-priv.h b/drivers/ufs/core/ufshcd-priv.h
index 7aea8fbaeee8..1f413b3aab5d 100644
--- a/drivers/ufs/core/ufshcd-priv.h
+++ b/drivers/ufs/core/ufshcd-priv.h
@@ -236,12 +236,6 @@ static inline void ufshcd_vops_config_scaling_param(struct ufs_hba *hba,
hba->vops->config_scaling_param(hba, p, data);
}
-static inline void ufshcd_vops_reinit_notify(struct ufs_hba *hba)
-{
- if (hba->vops && hba->vops->reinit_notify)
- hba->vops->reinit_notify(hba);
-}
-
static inline int ufshcd_vops_mcq_config_resource(struct ufs_hba *hba)
{
if (hba->vops && hba->vops->mcq_config_resource)
diff --git a/drivers/ufs/core/ufshcd.c b/drivers/ufs/core/ufshcd.c
index 6a2685333076..7bd0f5482db3 100644
--- a/drivers/ufs/core/ufshcd.c
+++ b/drivers/ufs/core/ufshcd.c
@@ -8820,7 +8820,6 @@ static int ufshcd_probe_hba(struct ufs_hba *hba, bool init_dev_params)
ufshcd_device_reset(hba);
ufs_put_device_desc(hba);
ufshcd_hba_stop(hba);
- ufshcd_vops_reinit_notify(hba);
ret = ufshcd_hba_enable(hba);
if (ret) {
dev_err(hba->dev, "Host controller enable failed\n");
diff --git a/drivers/ufs/host/ufs-qcom.c b/drivers/ufs/host/ufs-qcom.c
index 3b592492e152..32b0c74437de 100644
--- a/drivers/ufs/host/ufs-qcom.c
+++ b/drivers/ufs/host/ufs-qcom.c
@@ -368,6 +368,11 @@ static int ufs_qcom_power_up_sequence(struct ufs_hba *hba)
if (ret)
return ret;
+ if (phy->power_count) {
+ phy_power_off(phy);
+ phy_exit(phy);
+ }
+
/* phy initialization - calibrate the phy */
ret = phy_init(phy);
if (ret) {
@@ -1579,13 +1584,6 @@ static void ufs_qcom_config_scaling_param(struct ufs_hba *hba,
}
#endif
-static void ufs_qcom_reinit_notify(struct ufs_hba *hba)
-{
- struct ufs_qcom_host *host = ufshcd_get_variant(hba);
-
- phy_power_off(host->generic_phy);
-}
-
/* Resources */
static const struct ufshcd_res_info ufs_res_info[RES_MAX] = {
{.name = "ufs_mem",},
@@ -1825,7 +1823,6 @@ static const struct ufs_hba_variant_ops ufs_hba_qcom_vops = {
.device_reset = ufs_qcom_device_reset,
.config_scaling_param = ufs_qcom_config_scaling_param,
.program_key = ufs_qcom_ice_program_key,
- .reinit_notify = ufs_qcom_reinit_notify,
.mcq_config_resource = ufs_qcom_mcq_config_resource,
.get_hba_mac = ufs_qcom_get_hba_mac,
.op_runtime_config = ufs_qcom_op_runtime_config,
diff --git a/include/ufs/ufshcd.h b/include/ufs/ufshcd.h
index d7aca9e61684..6e40b8e8009b 100644
--- a/include/ufs/ufshcd.h
+++ b/include/ufs/ufshcd.h
@@ -327,7 +327,6 @@ struct ufs_pwr_mode_info {
* @program_key: program or evict an inline encryption key
* @fill_crypto_prdt: initialize crypto-related fields in the PRDT
* @event_notify: called to notify important events
- * @reinit_notify: called to notify reinit of UFSHCD during max gear switch
* @mcq_config_resource: called to configure MCQ platform resources
* @get_hba_mac: reports maximum number of outstanding commands supported by
* the controller. Should be implemented for UFSHCI 4.0 or later
@@ -379,7 +378,6 @@ struct ufs_hba_variant_ops {
void *prdt, unsigned int num_segments);
void (*event_notify)(struct ufs_hba *hba,
enum ufs_event_type evt, void *data);
- void (*reinit_notify)(struct ufs_hba *);
int (*mcq_config_resource)(struct ufs_hba *hba);
int (*get_hba_mac)(struct ufs_hba *hba);
int (*op_runtime_config)(struct ufs_hba *hba);
--
2.25.1
Powered by blists - more mailing lists