| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20241211025755.56173-1-hao.ge@linux.dev>
Date: Wed, 11 Dec 2024 10:57:55 +0800
From: Hao Ge <hao.ge@...ux.dev>
To: surenb@...gle.com,
kent.overstreet@...ux.dev,
akpm@...ux-foundation.org
Cc: linux-mm@...ck.org,
linux-kernel@...r.kernel.org,
hao.ge@...ux.dev,
Hao Ge <gehao@...inos.cn>,
Ben Greear <greearb@...delatech.com>
Subject: [PATCH v3] mm/alloc_tag: Fix panic when CONFIG_KASAN enabled and CONFIG_KASAN_VMALLOC not enabled
From: Hao Ge <gehao@...inos.cn>
When CONFIG_KASAN is enabled but CONFIG_KASAN_VMALLOC
is not enabled, we may encounter a panic during system boot.
Because we haven't allocated pages and created mappings
for the shadow memory corresponding to module_tags region,
similar to how it is done for execmem_vmalloc.
The difference is that our module_tags are allocated on demand,
so similarly,we also need to allocate shadow memory regions on demand.
However, we still need to adhere to the MODULE_ALIGN principle.
Here is the log for panic:
[ 18.349421] BUG: unable to handle page fault for address: fffffbfff8092000
[ 18.350016] #PF: supervisor read access in kernel mode
[ 18.350459] #PF: error_code(0x0000) - not-present page
[ 18.350904] PGD 20fe52067 P4D 219dc8067 PUD 219dc4067 PMD 102495067 PTE 0
[ 18.351484] Oops: Oops: 0000 [#1] PREEMPT SMP KASAN NOPTI
[ 18.351961] CPU: 5 UID: 0 PID: 1 Comm: systemd Not tainted 6.13.0-rc1+ #3
[ 18.352533] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.3-0-ga6ed6b701f0a-prebuilt.qemu.org 04/01/2014
[ 18.353494] RIP: 0010:kasan_check_range+0xba/0x1b0
[ 18.353931] Code: 8d 5a 07 4c 0f 49 da 49 c1 fb 03 45 85 db 0f 84 dd 00 00 00 45 89 db 4a 8d 14 d8 eb 0d 48 83 c0 08 48 39 c2 0f 84 c1 00 00 00 <48> 83 38 00 74 ed 48 8d 50 08 eb 0d 48 83 c0 01 48 39 d0 0f 84 90
[ 18.355484] RSP: 0018:ff11000101877958 EFLAGS: 00010206
[ 18.355937] RAX: fffffbfff8092000 RBX: fffffbfff809201e RCX: ffffffff82a7ceac
[ 18.356542] RDX: fffffbfff8092018 RSI: 00000000000000f0 RDI: ffffffffc0490000
[ 18.357153] RBP: fffffbfff8092000 R08: 0000000000000001 R09: fffffbfff809201d
[ 18.357756] R10: ffffffffc04900ef R11: 0000000000000003 R12: ffffffffc0490000
[ 18.358365] R13: ff11000101877b48 R14: ffffffffc0490000 R15: 000000000000002c
[ 18.358968] FS: 00007f9bd13c5940(0000) GS:ff110001eb480000(0000) knlGS:0000000000000000
[ 18.359648] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 18.360178] CR2: fffffbfff8092000 CR3: 0000000109214004 CR4: 0000000000771ef0
[ 18.360790] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 18.361404] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[ 18.362020] PKRU: 55555554
[ 18.362261] Call Trace:
[ 18.362481] <TASK>
[ 18.362671] ? __die+0x23/0x70
[ 18.362964] ? page_fault_oops+0xc2/0x160
[ 18.363318] ? exc_page_fault+0xad/0xc0
[ 18.363680] ? asm_exc_page_fault+0x26/0x30
[ 18.364056] ? move_module+0x3cc/0x8a0
[ 18.364398] ? kasan_check_range+0xba/0x1b0
[ 18.364755] __asan_memcpy+0x3c/0x60
[ 18.365074] move_module+0x3cc/0x8a0
[ 18.365386] layout_and_allocate.constprop.0+0x3d5/0x720
[ 18.365841] ? early_mod_check+0x3dc/0x510
[ 18.366195] load_module+0x72/0x1850
[ 18.366509] ? __pfx_kernel_read_file+0x10/0x10
[ 18.366918] ? vm_mmap_pgoff+0x21c/0x2d0
[ 18.367262] init_module_from_file+0xd1/0x130
[ 18.367638] ? __pfx_init_module_from_file+0x10/0x10
[ 18.368073] ? __pfx__raw_spin_lock+0x10/0x10
[ 18.368456] ? __pfx_cred_has_capability.isra.0+0x10/0x10
[ 18.368938] idempotent_init_module+0x22c/0x790
[ 18.369332] ? simple_getattr+0x6f/0x120
[ 18.369676] ? __pfx_idempotent_init_module+0x10/0x10
[ 18.370110] ? fdget+0x58/0x3a0
[ 18.370393] ? security_capable+0x64/0xf0
[ 18.370745] __x64_sys_finit_module+0xc2/0x140
[ 18.371136] do_syscall_64+0x7d/0x160
[ 18.371459] ? fdget_pos+0x1c8/0x4c0
[ 18.371784] ? ksys_read+0xfd/0x1d0
[ 18.372106] ? syscall_exit_to_user_mode+0x10/0x1f0
[ 18.372525] ? do_syscall_64+0x89/0x160
[ 18.372860] ? do_syscall_64+0x89/0x160
[ 18.373194] ? do_syscall_64+0x89/0x160
[ 18.373527] ? syscall_exit_to_user_mode+0x10/0x1f0
[ 18.373952] ? do_syscall_64+0x89/0x160
[ 18.374283] ? syscall_exit_to_user_mode+0x10/0x1f0
[ 18.374701] ? do_syscall_64+0x89/0x160
[ 18.375037] ? do_user_addr_fault+0x4a8/0xa40
[ 18.375416] ? clear_bhb_loop+0x25/0x80
[ 18.375748] ? clear_bhb_loop+0x25/0x80
[ 18.376119] ? clear_bhb_loop+0x25/0x80
[ 18.376450] entry_SYSCALL_64_after_hwframe+0x76/0x7e
Fixes: 233e89322cbe ("alloc_tag: fix module allocation tags populated area calculation")
Reported-by: Ben Greear <greearb@...delatech.com>
Closes: https://lore.kernel.org/all/1ba0cc57-e2ed-caa2-1241-aa5615bee01f@candelatech.com/
Signed-off-by: Hao Ge <gehao@...inos.cn>
---
v3: Adjusting the title because the previous one was a bit unclear.
Suren has pointed out that our condition for determining whether
to allocate shadow memory is unreasonable.We have adjusted our method
to use every 8 pages as an index (idx), and we will make decisions based
on this idx when determining whether to allocate shadow memory.
v2: Add comments to facilitate understanding of the code.
Add align nr << PAGE_SHIFT to MODULE_ALIGN,even though kasan_alloc_module_shadow
already handles this internally,but to make the code more readable and user-friendly
commit 233e89322cbe ("alloc_tag: fix module allocation
tags populated area calculation") is currently in the
mm-hotfixes-unstable branch, so this patch is
developed based on the mm-hotfixes-unstable branch.
---
lib/alloc_tag.c | 23 +++++++++++++++++++++++
1 file changed, 23 insertions(+)
diff --git a/lib/alloc_tag.c b/lib/alloc_tag.c
index f942408b53ef..8bf04756887d 100644
--- a/lib/alloc_tag.c
+++ b/lib/alloc_tag.c
@@ -10,6 +10,7 @@
#include <linux/seq_buf.h>
#include <linux/seq_file.h>
#include <linux/vmalloc.h>
+#include <linux/math.h>
#define ALLOCINFO_FILE_NAME "allocinfo"
#define MODULE_ALLOC_TAG_VMAP_SIZE (100000UL * sizeof(struct alloc_tag))
@@ -404,6 +405,9 @@ static int vm_module_tags_populate(void)
unsigned long phys_end = ALIGN_DOWN(module_tags.start_addr, PAGE_SIZE) +
(vm_module_tags->nr_pages << PAGE_SHIFT);
unsigned long new_end = module_tags.start_addr + module_tags.size;
+ unsigned long phys_idx = (vm_module_tags->nr_pages +
+ (2 << KASAN_SHADOW_SCALE_SHIFT) - 1) >> KASAN_SHADOW_SCALE_SHIFT;
+ unsigned long new_idx = 0;
if (phys_end < new_end) {
struct page **next_page = vm_module_tags->pages + vm_module_tags->nr_pages;
@@ -421,7 +425,26 @@ static int vm_module_tags_populate(void)
__free_page(next_page[i]);
return -ENOMEM;
}
+
vm_module_tags->nr_pages += nr;
+
+ new_idx = (vm_module_tags->nr_pages +
+ (2 << KASAN_SHADOW_SCALE_SHIFT) - 1) >> KASAN_SHADOW_SCALE_SHIFT;
+
+ /*
+ * Kasan allocates 1 byte of shadow for every 8 bytes of data.
+ * When kasan_alloc_module_shadow allocates shadow memory,
+ * its unit of allocation is a page.
+ * Therefore, here we need to align to MODULE_ALIGN.
+ *
+ * For every KASAN_SHADOW_SCALE_SHIFT, a shadow page is allocated.
+ * So, we determine whether to allocate based on whether the
+ * number of pages falls within the scope of the same KASAN_SHADOW_SCALE_SHIFT.
+ */
+ if (phys_idx != new_idx)
+ kasan_alloc_module_shadow((void *)round_up(phys_end, MODULE_ALIGN),
+ (new_idx - phys_idx) * MODULE_ALIGN,
+ GFP_KERNEL);
}
/*
--
2.25.1
Powered by blists - more mailing lists