| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <d0cb6c31-aebf-4662-93ca-274ee1bf4f98@amlogic.com>
Date: Wed, 11 Dec 2024 16:08:19 +0800
From: Xianwei Zhao <xianwei.zhao@...ogic.com>
To: Jerome Brunet <jbrunet@...libre.com>,
Xianwei Zhao via B4 Relay <devnull+xianwei.zhao.amlogic.com@...nel.org>
Cc: Neil Armstrong <neil.armstrong@...aro.org>,
Michael Turquette <mturquette@...libre.com>, Stephen Boyd
<sboyd@...nel.org>, Rob Herring <robh@...nel.org>,
Krzysztof Kozlowski <krzk+dt@...nel.org>, Conor Dooley
<conor+dt@...nel.org>, Chuan Liu <chuan.liu@...ogic.com>,
Kevin Hilman <khilman@...libre.com>,
Martin Blumenstingl <martin.blumenstingl@...glemail.com>,
linux-amlogic@...ts.infradead.org, linux-clk@...r.kernel.org,
devicetree@...r.kernel.org, linux-kernel@...r.kernel.org,
linux-arm-kernel@...ts.infradead.org
Subject: Re: [PATCH v2 5/5] clk: meson: add A5 clock peripherals controller
driver
Hi Jerome,
Thanks for your reply.
On 2024/11/26 01:02, Jerome Brunet wrote:
> [ EXTERNAL EMAIL ]
>
> On Wed 20 Nov 2024 at 15:01, Xianwei Zhao via B4 Relay <devnull+xianwei.zhao.amlogic.com@...nel.org> wrote:
>
>> From: Chuan Liu <chuan.liu@...ogic.com>
>>
>> Add the peripherals clock controller driver in the A5 SoC family.
>>
>> Signed-off-by: Chuan Liu <chuan.liu@...ogic.com>
>> Signed-off-by: Xianwei Zhao <xianwei.zhao@...ogic.com>
>> ---
>> drivers/clk/meson/Kconfig | 13 +
>> drivers/clk/meson/Makefile | 1 +
>> drivers/clk/meson/a5-peripherals.c | 1387 ++++++++++++++++++++++++++++++++++++
>> drivers/clk/meson/clk-regmap.h | 17 +
>> 4 files changed, 1418 insertions(+)
>>
>> diff --git a/drivers/clk/meson/Kconfig b/drivers/clk/meson/Kconfig
>> index 3c97b3a1649d..79ec72156cee 100644
>> --- a/drivers/clk/meson/Kconfig
>> +++ b/drivers/clk/meson/Kconfig
>> @@ -146,6 +146,19 @@ config COMMON_CLK_A5_PLL
>> Say Y if you want the board to work, because PLLs are the parent
>> of most peripherals.
>>
>> +config COMMON_CLK_A5_PERIPHERALS
>> + tristate "Amlogic A5 peripherals clock controller"
>> + depends on ARM64
>> + default y
>> + imply COMMON_CLK_SCMI
>> + imply COMMON_CLK_A5_PLL
>> + select COMMON_CLK_MESON_REGMAP
>> + select COMMON_CLK_MESON_DUALDIV
>> + select COMMON_CLK_MESON_CLKC_UTILS
>> + help
>> + Support for the Peripherals clock controller on Amlogic AV40x device,
>
> Same
Will remove it.
>
>> + AKA A5. Say Y if you want the peripherals clock to work.
>> +
>> config COMMON_CLK_C3_PLL
>> tristate "Amlogic C3 PLL clock controller"
>> depends on ARM64
>> diff --git a/drivers/clk/meson/Makefile b/drivers/clk/meson/Makefile
>> index fc4b8a723145..58236c6e8377 100644
>> --- a/drivers/clk/meson/Makefile
>> +++ b/drivers/clk/meson/Makefile
>> @@ -21,6 +21,7 @@ obj-$(CONFIG_COMMON_CLK_AXG_AUDIO) += axg-audio.o
>> obj-$(CONFIG_COMMON_CLK_A1_PLL) += a1-pll.o
>> obj-$(CONFIG_COMMON_CLK_A1_PERIPHERALS) += a1-peripherals.o
>> obj-$(CONFIG_COMMON_CLK_A5_PLL) += a5-pll.o
>> +obj-$(CONFIG_COMMON_CLK_A5_PERIPHERALS) += a5-peripherals.o
>> obj-$(CONFIG_COMMON_CLK_C3_PLL) += c3-pll.o
>> obj-$(CONFIG_COMMON_CLK_C3_PERIPHERALS) += c3-peripherals.o
>> obj-$(CONFIG_COMMON_CLK_GXBB) += gxbb.o gxbb-aoclk.o
>> diff --git a/drivers/clk/meson/a5-peripherals.c b/drivers/clk/meson/a5-peripherals.c
>> new file mode 100644
>> index 000000000000..ed408f1c5b1f
>> --- /dev/null
>> +++ b/drivers/clk/meson/a5-peripherals.c
>> @@ -0,0 +1,1387 @@
>> +// SPDX-License-Identifier: GPL-2.0-only
>> +/*
>> + * Amlogic A5 Peripherals Clock Controller Driver
>> + *
>> + * Copyright (c) 2024 Amlogic, inc.
>> + * Author: Chuan Liu <chuan.liu@...ogic.com>
>> + */
>> +
>> +#include <linux/clk-provider.h>
>> +#include <linux/platform_device.h>
>> +#include "clk-regmap.h"
>> +#include "clk-dualdiv.h"
>> +#include "meson-clkc-utils.h"
>> +#include <dt-bindings/clock/amlogic,a5-peripherals-clkc.h>
>> +
>> +#define CLKCTRL_RTC_BY_OSCIN_CTRL0 0x8
>> +#define CLKCTRL_RTC_BY_OSCIN_CTRL1 0xc
>> +#define CLKCTRL_RTC_CTRL 0x10
>> +#define CLKCTRL_SYS_CLK_EN0_REG0 0x44
>> +#define CLKCTRL_SYS_CLK_EN0_REG1 0x48
>> +#define CLKCTRL_DSPA_CLK_CTRL0 0x9c
>> +#define CLKCTRL_CLK12_24_CTRL 0xa8
>> +#define CLKCTRL_AXI_CLK_EN0 0xac
>> +#define CLKCTRL_TS_CLK_CTRL 0x158
>> +#define CLKCTRL_ETH_CLK_CTRL 0x164
>> +#define CLKCTRL_NAND_CLK_CTRL 0x168
>> +#define CLKCTRL_SD_EMMC_CLK_CTRL 0x16c
>> +#define CLKCTRL_SPICC_CLK_CTRL 0x174
>> +#define CLKCTRL_GEN_CLK_CTRL 0x178
>> +#define CLKCTRL_SAR_CLK_CTRL0 0x17c
>> +#define CLKCTRL_PWM_CLK_AB_CTRL 0x180
>> +#define CLKCTRL_PWM_CLK_CD_CTRL 0x184
>> +#define CLKCTRL_PWM_CLK_EF_CTRL 0x188
>> +#define CLKCTRL_PWM_CLK_GH_CTRL 0x18c
>> +#define CLKCTRL_NNA_CLK_CNTL 0x220
>
> Same comment as previous patches
>
there are no registers of other modules interspersed in it.
>> +
>> +static struct clk_regmap rtc_xtal_clkin = {
>> + .data = &(struct clk_regmap_gate_data) {
>> + .offset = CLKCTRL_RTC_BY_OSCIN_CTRL0,
>> + .bit_idx = 31,
>> + },
>> + .hw.init = &(struct clk_init_data) {
>> + .name = "rtc_xtal_clkin",
>> + .ops = &clk_regmap_gate_ops,
>> + .parent_data = &(const struct clk_parent_data) {
>> + .fw_name = "oscin",
>> + },
>> + .num_parents = 1,
>> + },
>> +};
>> +
>> +static const struct meson_clk_dualdiv_param rtc_32k_div_table[] = {
>> + { 733, 732, 8, 11, 1 },
>> + { /* sentinel */ }
>> +};
>> +
>> +static struct clk_regmap rtc_32k_div = {
>> + .data = &(struct meson_clk_dualdiv_data) {
>> + .n1 = {
>> + .reg_off = CLKCTRL_RTC_BY_OSCIN_CTRL0,
>> + .shift = 0,
>> + .width = 12,
>> + },
>> + .n2 = {
>> + .reg_off = CLKCTRL_RTC_BY_OSCIN_CTRL0,
>> + .shift = 12,
>> + .width = 12,
>> + },
>> + .m1 = {
>> + .reg_off = CLKCTRL_RTC_BY_OSCIN_CTRL1,
>> + .shift = 0,
>> + .width = 12,
>> + },
>> + .m2 = {
>> + .reg_off = CLKCTRL_RTC_BY_OSCIN_CTRL1,
>> + .shift = 12,
>> + .width = 12,
>> + },
>> + .dual = {
>> + .reg_off = CLKCTRL_RTC_BY_OSCIN_CTRL0,
>> + .shift = 28,
>> + .width = 1,
>> + },
>> + .table = rtc_32k_div_table,
>> + },
>> + .hw.init = &(struct clk_init_data) {
>> + .name = "rtc_32k_div",
>> + .ops = &meson_clk_dualdiv_ops,
>> + .parent_hws = (const struct clk_hw *[]) {
>> + &rtc_xtal_clkin.hw
>> + },
>> + .num_parents = 1,
>> + },
>> +};
>> +
>> +static const struct clk_parent_data rtc_32k_mux_parent_data[] = {
>> + { .hw = &rtc_32k_div.hw },
>> + { .hw = &rtc_xtal_clkin.hw }
>> +};
>> +
>> +static struct clk_regmap rtc_32k_mux = {
>> + .data = &(struct clk_regmap_mux_data) {
>> + .offset = CLKCTRL_RTC_BY_OSCIN_CTRL1,
>> + .mask = 0x1,
>> + .shift = 24,
>> + },
>> + .hw.init = &(struct clk_init_data) {
>> + .name = "rtc_32k_mux",
>> + .ops = &clk_regmap_mux_ops,
>> + .parent_data = rtc_32k_mux_parent_data,
>> + .num_parents = ARRAY_SIZE(rtc_32k_mux_parent_data),
>> + .flags = CLK_SET_RATE_PARENT,
>> + },
>> +};
>> +
>> +static struct clk_regmap rtc_32k = {
>> + .data = &(struct clk_regmap_gate_data) {
>> + .offset = CLKCTRL_RTC_BY_OSCIN_CTRL0,
>> + .bit_idx = 30,
>> + },
>> + .hw.init = &(struct clk_init_data) {
>> + .name = "rtc_32k",
>> + .ops = &clk_regmap_gate_ops,
>> + .parent_hws = (const struct clk_hw *[]) {
>> + &rtc_32k_mux.hw
>> + },
>> + .num_parents = 1,
>> + .flags = CLK_SET_RATE_PARENT,
>> + },
>> +};
>> +
>> +static const struct clk_parent_data rtc_clk_mux_parent_data[] = {
>> + { .fw_name = "oscin" },
>> + { .hw = &rtc_32k.hw },
>> + { .fw_name = "pad_osc" }
>> +};
>> +
>> +static struct clk_regmap rtc_clk = {
>> + .data = &(struct clk_regmap_mux_data) {
>> + .offset = CLKCTRL_RTC_CTRL,
>> + .mask = 0x3,
>> + .shift = 0,
>> + },
>> + .hw.init = &(struct clk_init_data) {
>> + .name = "rtc_clk",
>> + .ops = &clk_regmap_mux_ops,
>> + .parent_data = rtc_clk_mux_parent_data,
>> + .num_parents = ARRAY_SIZE(rtc_clk_mux_parent_data),
>> + .flags = CLK_SET_RATE_PARENT,
>> + },
>> +};
>> +
>> +#define A5_SYS_GATE(_name, _reg, _bit, _flags) \
>> + MESON_CLK_GATE_FW(_name, _reg, _bit, sysclk, \
>> + &clk_regmap_gate_ops, _flags)
>> +
>> +static A5_SYS_GATE(sys_reset_ctrl, CLKCTRL_SYS_CLK_EN0_REG0, 1, 0);
>> +static A5_SYS_GATE(sys_pwr_ctrl, CLKCTRL_SYS_CLK_EN0_REG0, 3, 0);
>> +static A5_SYS_GATE(sys_pad_ctrl, CLKCTRL_SYS_CLK_EN0_REG0, 4, 0);
>> +static A5_SYS_GATE(sys_ctrl, CLKCTRL_SYS_CLK_EN0_REG0, 5, 0);
>> +static A5_SYS_GATE(sys_ts_pll, CLKCTRL_SYS_CLK_EN0_REG0, 6, 0);
>> +
>> +/*
>> + * NOTE: sys_dev_arb provides the clock to the ETH and SPICC arbiters that
>> + * access the AXI bus.
>> + */
>> +static A5_SYS_GATE(sys_dev_arb, CLKCTRL_SYS_CLK_EN0_REG0, 7, 0);
>> +static A5_SYS_GATE(sys_mailbox, CLKCTRL_SYS_CLK_EN0_REG0, 10, 0);
>> +static A5_SYS_GATE(sys_jtag_ctrl, CLKCTRL_SYS_CLK_EN0_REG0, 12, 0);
>> +static A5_SYS_GATE(sys_ir_ctrl, CLKCTRL_SYS_CLK_EN0_REG0, 13, 0);
>> +static A5_SYS_GATE(sys_msr_clk, CLKCTRL_SYS_CLK_EN0_REG0, 15, 0);
>> +static A5_SYS_GATE(sys_rom, CLKCTRL_SYS_CLK_EN0_REG0, 16, 0);
>> +static A5_SYS_GATE(sys_cpu_apb, CLKCTRL_SYS_CLK_EN0_REG0, 18, 0);
>> +static A5_SYS_GATE(sys_rsa, CLKCTRL_SYS_CLK_EN0_REG0, 19, 0);
>> +static A5_SYS_GATE(sys_sar_adc, CLKCTRL_SYS_CLK_EN0_REG0, 20, 0);
>> +static A5_SYS_GATE(sys_startup, CLKCTRL_SYS_CLK_EN0_REG0, 21, 0);
>> +static A5_SYS_GATE(sys_secure, CLKCTRL_SYS_CLK_EN0_REG0, 22, 0);
>> +static A5_SYS_GATE(sys_spifc, CLKCTRL_SYS_CLK_EN0_REG0, 23, 0);
>> +static A5_SYS_GATE(sys_dspa, CLKCTRL_SYS_CLK_EN0_REG0, 24, 0);
>> +static A5_SYS_GATE(sys_nna, CLKCTRL_SYS_CLK_EN0_REG0, 25, 0);
>> +static A5_SYS_GATE(sys_eth_mac, CLKCTRL_SYS_CLK_EN0_REG0, 26, 0);
>> +static A5_SYS_GATE(sys_rama, CLKCTRL_SYS_CLK_EN0_REG0, 28, 0);
>> +static A5_SYS_GATE(sys_ramb, CLKCTRL_SYS_CLK_EN0_REG0, 30, 0);
>> +static A5_SYS_GATE(sys_audio_top, CLKCTRL_SYS_CLK_EN0_REG1, 0, 0);
>> +static A5_SYS_GATE(sys_audio_vad, CLKCTRL_SYS_CLK_EN0_REG1, 1, 0);
>> +static A5_SYS_GATE(sys_usb, CLKCTRL_SYS_CLK_EN0_REG1, 2, 0);
>> +static A5_SYS_GATE(sys_sd_emmc_a, CLKCTRL_SYS_CLK_EN0_REG1, 3, 0);
>> +static A5_SYS_GATE(sys_sd_emmc_c, CLKCTRL_SYS_CLK_EN0_REG1, 4, 0);
>> +static A5_SYS_GATE(sys_pwm_ab, CLKCTRL_SYS_CLK_EN0_REG1, 5, 0);
>> +static A5_SYS_GATE(sys_pwm_cd, CLKCTRL_SYS_CLK_EN0_REG1, 6, 0);
>> +static A5_SYS_GATE(sys_pwm_ef, CLKCTRL_SYS_CLK_EN0_REG1, 7, 0);
>> +static A5_SYS_GATE(sys_pwm_gh, CLKCTRL_SYS_CLK_EN0_REG1, 8, 0);
>> +static A5_SYS_GATE(sys_spicc_1, CLKCTRL_SYS_CLK_EN0_REG1, 9, 0);
>> +static A5_SYS_GATE(sys_spicc_0, CLKCTRL_SYS_CLK_EN0_REG1, 10, 0);
>> +static A5_SYS_GATE(sys_uart_a, CLKCTRL_SYS_CLK_EN0_REG1, 11, 0);
>> +static A5_SYS_GATE(sys_uart_b, CLKCTRL_SYS_CLK_EN0_REG1, 12, 0);
>> +static A5_SYS_GATE(sys_uart_c, CLKCTRL_SYS_CLK_EN0_REG1, 13, 0);
>> +static A5_SYS_GATE(sys_uart_d, CLKCTRL_SYS_CLK_EN0_REG1, 14, 0);
>> +static A5_SYS_GATE(sys_uart_e, CLKCTRL_SYS_CLK_EN0_REG1, 15, 0);
>> +static A5_SYS_GATE(sys_i2c_m_a, CLKCTRL_SYS_CLK_EN0_REG1, 16, 0);
>> +static A5_SYS_GATE(sys_i2c_m_b, CLKCTRL_SYS_CLK_EN0_REG1, 17, 0);
>> +static A5_SYS_GATE(sys_i2c_m_c, CLKCTRL_SYS_CLK_EN0_REG1, 18, 0);
>> +static A5_SYS_GATE(sys_i2c_m_d, CLKCTRL_SYS_CLK_EN0_REG1, 19, 0);
>> +static A5_SYS_GATE(sys_rtc, CLKCTRL_SYS_CLK_EN0_REG1, 21, 0);
>> +
>> +#define A5_AXI_GATE(_name, _reg, _bit, _flags) \
>> + MESON_CLK_GATE_FW(_name, _reg, _bit, axiclk, \
>> + &clk_regmap_gate_ops, _flags)
>> +
>> +static A5_AXI_GATE(axi_audio_vad, CLKCTRL_AXI_CLK_EN0, 0, 0);
>> +static A5_AXI_GATE(axi_audio_top, CLKCTRL_AXI_CLK_EN0, 1, 0);
>> +static A5_AXI_GATE(axi_ramb, CLKCTRL_AXI_CLK_EN0, 5, 0);
>> +static A5_AXI_GATE(axi_rama, CLKCTRL_AXI_CLK_EN0, 6, 0);
>> +static A5_AXI_GATE(axi_nna, CLKCTRL_AXI_CLK_EN0, 12, 0);
>> +
>> +/*
>> + * NOTE: axi_dev1_dmc provides the clock for the peripherals(EMMC, SDIO,
>> + * sec_top, USB, Audio) to access the AXI bus of the DDR.
>> + */
>> +static A5_AXI_GATE(axi_dev1_dmc, CLKCTRL_AXI_CLK_EN0, 13, 0);
>> +
>> +/*
>> + * NOTE: axi_dev0_dmc provides the clock for the peripherals(ETH and SPICC)
>> + * to access the AXI bus of the DDR.
>> + */
>> +static A5_AXI_GATE(axi_dev0_dmc, CLKCTRL_AXI_CLK_EN0, 14, 0);
>> +static A5_AXI_GATE(axi_dsp_dmc, CLKCTRL_AXI_CLK_EN0, 15, 0);
>> +
>> +static struct clk_regmap clk_12_24m_in = {
>> + .data = &(struct clk_regmap_gate_data) {
>> + .offset = CLKCTRL_CLK12_24_CTRL,
>> + .bit_idx = 11,
>> + },
>> + .hw.init = &(struct clk_init_data) {
>> + .name = "clk_12_24m_in",
>> + .ops = &clk_regmap_gate_ops,
>> + .parent_data = &(const struct clk_parent_data) {
>> + .fw_name = "xtal_24m",
>> + },
>> + .num_parents = 1,
>> + },
>> +};
>> +
>> +static struct clk_regmap clk_12_24m = {
>> + .data = &(struct clk_regmap_div_data) {
>> + .offset = CLKCTRL_CLK12_24_CTRL,
>> + .shift = 10,
>> + .width = 1,
>> + },
>> + .hw.init = &(struct clk_init_data) {
>> + .name = "clk_12_24m",
>> + .ops = &clk_regmap_divider_ops,
>> + .parent_hws = (const struct clk_hw *[]) {
>> + &clk_12_24m_in.hw
>> + },
>> + .num_parents = 1,
>> + },
>> +};
>> +
>> +static struct clk_regmap fclk_25m_div = {
>> + .data = &(struct clk_regmap_div_data) {
>> + .offset = CLKCTRL_CLK12_24_CTRL,
>> + .shift = 0,
>> + .width = 8,
>> + },
>> + .hw.init = &(struct clk_init_data) {
>> + .name = "fclk_25m_div",
>> + .ops = &clk_regmap_divider_ops,
>> + .parent_data = &(const struct clk_parent_data) {
>> + .fw_name = "fix",
>> + },
>> + .num_parents = 1,
>> + },
>> +};
>> +
>> +static struct clk_regmap fclk_25m = {
>> + .data = &(struct clk_regmap_gate_data) {
>> + .offset = CLKCTRL_CLK12_24_CTRL,
>> + .bit_idx = 12,
>> + },
>> + .hw.init = &(struct clk_init_data) {
>> + .name = "fclk_25m",
>> + .ops = &clk_regmap_gate_ops,
>> + .parent_hws = (const struct clk_hw *[]) {
>> + &fclk_25m_div.hw
>> + },
>> + .num_parents = 1,
>> + .flags = CLK_SET_RATE_PARENT,
>> + },
>> +};
>> +
>> +/*
>> + * Channel 4 5 8 9 10 11 13 14 15 16 18 are not connected.
>> + *
>> + * gp1 is designed for DSU (DynamIQ Shared Unit) alone. It cannot be changed
>> + * arbitrarily. gp1 is read-only in the kernel and is only open for debug
>> + * purposes.
>> + */
>> +static u32 gen_parent_table[] = { 0, 1, 2, 3, 6, 7, 12, 17, 19, 20, 21, 22, 23,
>> + 24, 25, 26, 27, 28};
>> +
>> +static const struct clk_parent_data gen_parent_data[] = {
>> + { .fw_name = "oscin" },
>> + { .hw = &rtc_clk.hw },
>> + { .fw_name = "sysplldiv16" },
>> + { .fw_name = "ddr" },
>> + { .fw_name = "gp1" },
>> + { .fw_name = "hifi" },
>> + { .fw_name = "clkmsr" },
>> + { .fw_name = "cpudiv16" },
>> + { .fw_name = "fdiv2" },
>> + { .fw_name = "fdiv2p5" },
>> + { .fw_name = "fdiv3" },
>> + { .fw_name = "fdiv4" },
>> + { .fw_name = "fdiv5" },
>> + { .fw_name = "fdiv7" },
>> + { .fw_name = "mpll0" },
>> + { .fw_name = "mpll1" },
>> + { .fw_name = "mpll2" },
>> + { .fw_name = "mpll3" }
>> +};
>> +
>> +static struct clk_regmap gen_sel = {
>> + .data = &(struct clk_regmap_mux_data) {
>> + .offset = CLKCTRL_GEN_CLK_CTRL,
>> + .mask = 0x1f,
>> + .shift = 12,
>> + .table = gen_parent_table,
>> + },
>> + .hw.init = &(struct clk_init_data) {
>> + .name = "gen_sel",
>> + .ops = &clk_regmap_mux_ops,
>> + .parent_data = gen_parent_data,
>> + .num_parents = ARRAY_SIZE(gen_parent_data),
>> + },
>> +};
>> +
>> +static struct clk_regmap gen_div = {
>> + .data = &(struct clk_regmap_div_data) {
>> + .offset = CLKCTRL_GEN_CLK_CTRL,
>> + .shift = 0,
>> + .width = 11,
>> + },
>> + .hw.init = &(struct clk_init_data) {
>> + .name = "gen_div",
>> + .ops = &clk_regmap_divider_ops,
>> + .parent_hws = (const struct clk_hw *[]) {
>> + &gen_sel.hw
>> + },
>> + .num_parents = 1,
>> + .flags = CLK_SET_RATE_PARENT,
>> + },
>> +};
>> +
>> +static struct clk_regmap gen = {
>> + .data = &(struct clk_regmap_gate_data) {
>> + .offset = CLKCTRL_GEN_CLK_CTRL,
>> + .bit_idx = 11,
>> + },
>> + .hw.init = &(struct clk_init_data) {
>> + .name = "gen",
>> + .ops = &clk_regmap_gate_ops,
>> + .parent_hws = (const struct clk_hw *[]) {
>> + &gen_div.hw
>> + },
>> + .num_parents = 1,
>> + .flags = CLK_SET_RATE_PARENT,
>> + },
>> +};
>> +
>> +static const struct clk_parent_data saradc_parent_data[] = {
>> + { .fw_name = "oscin" },
>> + { .fw_name = "sysclk" }
>> +};
>> +
>> +static struct clk_regmap saradc_sel = {
>> + .data = &(struct clk_regmap_mux_data) {
>> + .offset = CLKCTRL_SAR_CLK_CTRL0,
>> + .mask = 0x1,
>> + .shift = 9,
>> + },
>> + .hw.init = &(struct clk_init_data) {
>> + .name = "saradc_sel",
>> + .ops = &clk_regmap_mux_ops,
>> + .parent_data = saradc_parent_data,
>> + .num_parents = ARRAY_SIZE(saradc_parent_data),
>> + },
>> +};
>> +
>> +static struct clk_regmap saradc_div = {
>> + .data = &(struct clk_regmap_div_data) {
>> + .offset = CLKCTRL_SAR_CLK_CTRL0,
>> + .shift = 0,
>> + .width = 8,
>> + },
>> + .hw.init = &(struct clk_init_data) {
>> + .name = "saradc_div",
>> + .ops = &clk_regmap_divider_ops,
>> + .parent_hws = (const struct clk_hw *[]) {
>> + &saradc_sel.hw
>> + },
>> + .num_parents = 1,
>> + .flags = CLK_SET_RATE_PARENT,
>> + },
>> +};
>> +
>> +static struct clk_regmap saradc = {
>> + .data = &(struct clk_regmap_gate_data) {
>> + .offset = CLKCTRL_SAR_CLK_CTRL0,
>> + .bit_idx = 8,
>> + },
>> + .hw.init = &(struct clk_init_data) {
>> + .name = "saradc",
>> + .ops = &clk_regmap_gate_ops,
>> + .parent_hws = (const struct clk_hw *[]) {
>> + &saradc_div.hw
>> + },
>> + .num_parents = 1,
>> + .flags = CLK_SET_RATE_PARENT,
>> + },
>> +};
>> +
>> +static const struct clk_parent_data pwm_parent_data[] = {
>> + { .fw_name = "oscin" },
>> + { .hw = &rtc_clk.hw },
>> + { .fw_name = "fdiv4" },
>> + { .fw_name = "fdiv3" }
>> +};
>> +
>> +#define AML_PWM_CLK_MUX(_name, _reg, _shift) { \
>> + .data = &(struct clk_regmap_mux_data) { \
>> + .offset = _reg, \
>> + .mask = 0x3, \
>> + .shift = _shift, \
>> + }, \
>> + .hw.init = &(struct clk_init_data) { \
>> + .name = #_name "_sel", \
>> + .ops = &clk_regmap_mux_ops, \
>> + .parent_data = pwm_parent_data, \
>> + .num_parents = ARRAY_SIZE(pwm_parent_data), \
>> + }, \
>> +}
>> +
>> +#define AML_PWM_CLK_DIV(_name, _reg, _shift) { \
>> + .data = &(struct clk_regmap_div_data) { \
>> + .offset = _reg, \
>> + .shift = _shift, \
>> + .width = 8, \
>> + }, \
>> + .hw.init = &(struct clk_init_data) { \
>> + .name = #_name "_div", \
>> + .ops = &clk_regmap_divider_ops, \
>> + .parent_names = (const char *[]) { #_name "_sel" },\
>> + .num_parents = 1, \
>> + .flags = CLK_SET_RATE_PARENT, \
>> + }, \
>> +}
>> +
>> +#define AML_PWM_CLK_GATE(_name, _reg, _bit) { \
>> + .data = &(struct clk_regmap_gate_data) { \
>> + .offset = _reg, \
>> + .bit_idx = _bit, \
>> + }, \
>> + .hw.init = &(struct clk_init_data) { \
>> + .name = #_name, \
>> + .ops = &clk_regmap_gate_ops, \
>> + .parent_names = (const char *[]) { #_name "_div" },\
>> + .num_parents = 1, \
>> + .flags = CLK_SET_RATE_PARENT, \
>> + }, \
>> +}
>> +
>> +static struct clk_regmap pwm_a_sel =
>> + AML_PWM_CLK_MUX(pwm_a, CLKCTRL_PWM_CLK_AB_CTRL, 9);
>> +static struct clk_regmap pwm_a_div =
>> + AML_PWM_CLK_DIV(pwm_a, CLKCTRL_PWM_CLK_AB_CTRL, 0);
>> +static struct clk_regmap pwm_a =
>> + AML_PWM_CLK_GATE(pwm_a, CLKCTRL_PWM_CLK_AB_CTRL, 8);
>> +
>> +static struct clk_regmap pwm_b_sel =
>> + AML_PWM_CLK_MUX(pwm_b, CLKCTRL_PWM_CLK_AB_CTRL, 25);
>> +static struct clk_regmap pwm_b_div =
>> + AML_PWM_CLK_DIV(pwm_b, CLKCTRL_PWM_CLK_AB_CTRL, 16);
>> +static struct clk_regmap pwm_b =
>> + AML_PWM_CLK_GATE(pwm_b, CLKCTRL_PWM_CLK_AB_CTRL, 24);
>> +
>> +static struct clk_regmap pwm_c_sel =
>> + AML_PWM_CLK_MUX(pwm_c, CLKCTRL_PWM_CLK_CD_CTRL, 9);
>> +static struct clk_regmap pwm_c_div =
>> + AML_PWM_CLK_DIV(pwm_c, CLKCTRL_PWM_CLK_CD_CTRL, 0);
>> +static struct clk_regmap pwm_c =
>> + AML_PWM_CLK_GATE(pwm_c, CLKCTRL_PWM_CLK_CD_CTRL, 8);
>> +
>> +static struct clk_regmap pwm_d_sel =
>> + AML_PWM_CLK_MUX(pwm_d, CLKCTRL_PWM_CLK_CD_CTRL, 25);
>> +static struct clk_regmap pwm_d_div =
>> + AML_PWM_CLK_DIV(pwm_d, CLKCTRL_PWM_CLK_CD_CTRL, 16);
>> +static struct clk_regmap pwm_d =
>> + AML_PWM_CLK_GATE(pwm_d, CLKCTRL_PWM_CLK_CD_CTRL, 24);
>> +
>> +static struct clk_regmap pwm_e_sel =
>> + AML_PWM_CLK_MUX(pwm_e, CLKCTRL_PWM_CLK_EF_CTRL, 9);
>> +static struct clk_regmap pwm_e_div =
>> + AML_PWM_CLK_DIV(pwm_e, CLKCTRL_PWM_CLK_EF_CTRL, 0);
>> +static struct clk_regmap pwm_e =
>> + AML_PWM_CLK_GATE(pwm_e, CLKCTRL_PWM_CLK_EF_CTRL, 8);
>> +
>> +static struct clk_regmap pwm_f_sel =
>> + AML_PWM_CLK_MUX(pwm_f, CLKCTRL_PWM_CLK_EF_CTRL, 25);
>> +static struct clk_regmap pwm_f_div =
>> + AML_PWM_CLK_DIV(pwm_f, CLKCTRL_PWM_CLK_EF_CTRL, 16);
>> +static struct clk_regmap pwm_f =
>> + AML_PWM_CLK_GATE(pwm_f, CLKCTRL_PWM_CLK_EF_CTRL, 24);
>> +
>> +static struct clk_regmap pwm_g_sel =
>> + AML_PWM_CLK_MUX(pwm_g, CLKCTRL_PWM_CLK_GH_CTRL, 9);
>> +static struct clk_regmap pwm_g_div =
>> + AML_PWM_CLK_DIV(pwm_g, CLKCTRL_PWM_CLK_GH_CTRL, 0);
>> +static struct clk_regmap pwm_g =
>> + AML_PWM_CLK_GATE(pwm_g, CLKCTRL_PWM_CLK_GH_CTRL, 8);
>> +
>> +static struct clk_regmap pwm_h_sel =
>> + AML_PWM_CLK_MUX(pwm_h, CLKCTRL_PWM_CLK_GH_CTRL, 25);
>> +static struct clk_regmap pwm_h_div =
>> + AML_PWM_CLK_DIV(pwm_h, CLKCTRL_PWM_CLK_GH_CTRL, 16);
>> +static struct clk_regmap pwm_h =
>> + AML_PWM_CLK_GATE(pwm_h, CLKCTRL_PWM_CLK_GH_CTRL, 24);
>> +
>> +static const struct clk_parent_data spicc_parent_data[] = {
>> + { .fw_name = "oscin" },
>> + { .fw_name = "sysclk" },
>> + { .fw_name = "fdiv4" },
>> + { .fw_name = "fdiv3" },
>> + { .fw_name = "fdiv2" },
>> + { .fw_name = "fdiv5" },
>> + { .fw_name = "fdiv7" }
>> +};
>> +
>> +static struct clk_regmap spicc_0_sel = {
>> + .data = &(struct clk_regmap_mux_data) {
>> + .offset = CLKCTRL_SPICC_CLK_CTRL,
>> + .mask = 0x7,
>> + .shift = 7,
>> + },
>> + .hw.init = &(struct clk_init_data) {
>> + .name = "spicc_0_sel",
>> + .ops = &clk_regmap_mux_ops,
>> + .parent_data = spicc_parent_data,
>> + .num_parents = ARRAY_SIZE(spicc_parent_data),
>> + },
>> +};
>> +
>> +static struct clk_regmap spicc_0_div = {
>> + .data = &(struct clk_regmap_div_data) {
>> + .offset = CLKCTRL_SPICC_CLK_CTRL,
>> + .shift = 0,
>> + .width = 6,
>> + },
>> + .hw.init = &(struct clk_init_data) {
>> + .name = "spicc_0_div",
>> + .ops = &clk_regmap_divider_ops,
>> + .parent_hws = (const struct clk_hw *[]) {
>> + &spicc_0_sel.hw
>> + },
>> + .num_parents = 1,
>> + .flags = CLK_SET_RATE_PARENT,
>> + },
>> +};
>> +
>> +static struct clk_regmap spicc_0 = {
>> + .data = &(struct clk_regmap_gate_data) {
>> + .offset = CLKCTRL_SPICC_CLK_CTRL,
>> + .bit_idx = 6,
>> + },
>> + .hw.init = &(struct clk_init_data) {
>> + .name = "spicc_0",
>> + .ops = &clk_regmap_gate_ops,
>> + .parent_hws = (const struct clk_hw *[]) {
>> + &spicc_0_div.hw
>> + },
>> + .num_parents = 1,
>> + .flags = CLK_SET_RATE_PARENT,
>> + },
>> +};
>> +
>> +static struct clk_regmap spicc_1_sel = {
>> + .data = &(struct clk_regmap_mux_data) {
>> + .offset = CLKCTRL_SPICC_CLK_CTRL,
>> + .mask = 0x7,
>> + .shift = 23,
>> + },
>> + .hw.init = &(struct clk_init_data) {
>> + .name = "spicc_1_sel",
>> + .ops = &clk_regmap_mux_ops,
>> + .parent_data = spicc_parent_data,
>> + .num_parents = ARRAY_SIZE(spicc_parent_data),
>> + },
>> +};
>> +
>> +static struct clk_regmap spicc_1_div = {
>> + .data = &(struct clk_regmap_div_data) {
>> + .offset = CLKCTRL_SPICC_CLK_CTRL,
>> + .shift = 16,
>> + .width = 6,
>> + },
>> + .hw.init = &(struct clk_init_data) {
>> + .name = "spicc_1_div",
>> + .ops = &clk_regmap_divider_ops,
>> + .parent_hws = (const struct clk_hw *[]) {
>> + &spicc_1_sel.hw
>> + },
>> + .num_parents = 1,
>> + .flags = CLK_SET_RATE_PARENT,
>> + },
>> +};
>> +
>> +static struct clk_regmap spicc_1 = {
>> + .data = &(struct clk_regmap_gate_data) {
>> + .offset = CLKCTRL_SPICC_CLK_CTRL,
>> + .bit_idx = 22,
>> + },
>> + .hw.init = &(struct clk_init_data) {
>> + .name = "spicc_1",
>> + .ops = &clk_regmap_gate_ops,
>> + .parent_hws = (const struct clk_hw *[]) {
>> + &spicc_1_div.hw
>> + },
>> + .num_parents = 1,
>> + .flags = CLK_SET_RATE_PARENT,
>> + },
>> +};
>> +
>> +static const struct clk_parent_data emmc_parent_data[] = {
>> + { .fw_name = "oscin" },
>> + { .fw_name = "fdiv2" },
>> + { .fw_name = "fdiv3" },
>> + { .fw_name = "hifi" },
>> + { .fw_name = "fdiv2p5" },
>> + { .fw_name = "mpll2" },
>> + { .fw_name = "mpll3" },
>> + { .fw_name = "gp0" }
>> +};
>> +
>> +static struct clk_regmap sd_emmc_a_sel = {
>> + .data = &(struct clk_regmap_mux_data) {
>> + .offset = CLKCTRL_SD_EMMC_CLK_CTRL,
>> + .mask = 0x7,
>> + .shift = 9,
>> + },
>> + .hw.init = &(struct clk_init_data) {
>> + .name = "sd_emmc_a_sel",
>> + .ops = &clk_regmap_mux_ops,
>> + .parent_data = emmc_parent_data,
>> + .num_parents = ARRAY_SIZE(emmc_parent_data),
>> + },
>> +};
>> +
>> +static struct clk_regmap sd_emmc_a_div = {
>> + .data = &(struct clk_regmap_div_data) {
>> + .offset = CLKCTRL_SD_EMMC_CLK_CTRL,
>> + .shift = 0,
>> + .width = 7,
>> + },
>> + .hw.init = &(struct clk_init_data) {
>> + .name = "sd_emmc_a_div",
>> + .ops = &clk_regmap_divider_ops,
>> + .parent_hws = (const struct clk_hw *[]) {
>> + &sd_emmc_a_sel.hw
>> + },
>> + .num_parents = 1,
>> + .flags = CLK_SET_RATE_PARENT,
>> + },
>> +};
>> +
>> +static struct clk_regmap sd_emmc_a = {
>> + .data = &(struct clk_regmap_gate_data) {
>> + .offset = CLKCTRL_SD_EMMC_CLK_CTRL,
>> + .bit_idx = 7,
>> + },
>> + .hw.init = &(struct clk_init_data) {
>> + .name = "sd_emmc_a",
>> + .ops = &clk_regmap_gate_ops,
>> + .parent_hws = (const struct clk_hw *[]) {
>> + &sd_emmc_a_div.hw
>> + },
>> + .num_parents = 1,
>> + .flags = CLK_SET_RATE_PARENT,
>> + },
>> +};
>> +
>> +static struct clk_regmap sd_emmc_c_sel = {
>> + .data = &(struct clk_regmap_mux_data) {
>> + .offset = CLKCTRL_NAND_CLK_CTRL,
>> + .mask = 0x7,
>> + .shift = 9,
>> + },
>> + .hw.init = &(struct clk_init_data) {
>> + .name = "sd_emmc_c_sel",
>> + .ops = &clk_regmap_mux_ops,
>> + .parent_data = emmc_parent_data,
>> + .num_parents = ARRAY_SIZE(emmc_parent_data),
>> + },
>> +};
>> +
>> +static struct clk_regmap sd_emmc_c_div = {
>> + .data = &(struct clk_regmap_div_data) {
>> + .offset = CLKCTRL_NAND_CLK_CTRL,
>> + .shift = 0,
>> + .width = 7,
>> + },
>> + .hw.init = &(struct clk_init_data) {
>> + .name = "sd_emmc_c_div",
>> + .ops = &clk_regmap_divider_ops,
>> + .parent_hws = (const struct clk_hw *[]) {
>> + &sd_emmc_c_sel.hw
>> + },
>> + .num_parents = 1,
>> + .flags = CLK_SET_RATE_PARENT,
>> + },
>> +};
>> +
>> +static struct clk_regmap sd_emmc_c = {
>> + .data = &(struct clk_regmap_gate_data) {
>> + .offset = CLKCTRL_NAND_CLK_CTRL,
>> + .bit_idx = 7,
>> + },
>> + .hw.init = &(struct clk_init_data) {
>> + .name = "sd_emmc_c",
>> + .ops = &clk_regmap_gate_ops,
>> + .parent_hws = (const struct clk_hw *[]) {
>> + &sd_emmc_c_div.hw
>> + },
>> + .num_parents = 1,
>> + .flags = CLK_SET_RATE_PARENT,
>> + },
>> +};
>> +
>> +static struct clk_regmap ts_div = {
>> + .data = &(struct clk_regmap_div_data) {
>> + .offset = CLKCTRL_TS_CLK_CTRL,
>> + .shift = 0,
>> + .width = 8,
>> + },
>> + .hw.init = &(struct clk_init_data) {
>> + .name = "ts_div",
>> + .ops = &clk_regmap_divider_ops,
>> + .parent_data = &(const struct clk_parent_data) {
>> + .fw_name = "oscin",
>> + },
>> + .num_parents = 1,
>> + },
>> +};
>> +
>> +static struct clk_regmap ts = {
>> + .data = &(struct clk_regmap_gate_data) {
>> + .offset = CLKCTRL_TS_CLK_CTRL,
>> + .bit_idx = 8,
>> + },
>> + .hw.init = &(struct clk_init_data) {
>> + .name = "ts",
>> + .ops = &clk_regmap_gate_ops,
>> + .parent_hws = (const struct clk_hw *[]) {
>> + &ts_div.hw
>> + },
>> + .num_parents = 1,
>> + .flags = CLK_SET_RATE_PARENT,
>> + },
>> +};
>> +
>> +static struct clk_fixed_factor eth_125m_div = {
>> + .mult = 1,
>> + .div = 8,
>> + .hw.init = &(struct clk_init_data) {
>> + .name = "eth_125m_div",
>> + .ops = &clk_fixed_factor_ops,
>> + .parent_data = &(const struct clk_parent_data) {
>> + .fw_name = "fdiv2",
>> + },
>> + .num_parents = 1,
>> + },
>> +};
>> +
>> +static struct clk_regmap eth_125m = {
>> + .data = &(struct clk_regmap_gate_data) {
>> + .offset = CLKCTRL_ETH_CLK_CTRL,
>> + .bit_idx = 7,
>> + },
>> + .hw.init = &(struct clk_init_data) {
>> + .name = "eth_125m",
>> + .ops = &clk_regmap_gate_ops,
>> + .parent_hws = (const struct clk_hw *[]) {
>> + ð_125m_div.hw
>> + },
>> + .num_parents = 1,
>> + },
>> +};
>> +
>> +static struct clk_regmap eth_rmii_div = {
>> + .data = &(struct clk_regmap_div_data) {
>> + .offset = CLKCTRL_ETH_CLK_CTRL,
>> + .shift = 0,
>> + .width = 7,
>> + },
>> + .hw.init = &(struct clk_init_data) {
>> + .name = "eth_rmii_div",
>> + .ops = &clk_regmap_divider_ops,
>> + .parent_data = &(const struct clk_parent_data) {
>> + .fw_name = "fdiv2",
>> + },
>> + .num_parents = 1,
>> + },
>> +};
>> +
>> +static struct clk_regmap eth_rmii = {
>> + .data = &(struct clk_regmap_gate_data) {
>> + .offset = CLKCTRL_ETH_CLK_CTRL,
>> + .bit_idx = 8,
>> + },
>> + .hw.init = &(struct clk_init_data) {
>> + .name = "eth_rmii",
>> + .ops = &clk_regmap_gate_ops,
>> + .parent_hws = (const struct clk_hw *[]) {
>> + ð_rmii_div.hw
>> + },
>> + .num_parents = 1,
>> + .flags = CLK_SET_RATE_PARENT,
>> + },
>> +};
>> +
>> +/* Channel 6 is gp1. */
>> +static u32 dspa_parent_table[] = { 0, 1, 2, 3, 4, 5, 7};
>> +
>> +static const struct clk_parent_data dspa_parent_data[] = {
>> + { .fw_name = "oscin" },
>> + { .fw_name = "fdiv2p5" },
>> + { .fw_name = "fdiv3" },
>> + { .fw_name = "rtc" },
>> + { .fw_name = "hifi" },
>> + { .fw_name = "fdiv4" },
>> + { .hw = &rtc_clk.hw }
>> +};
>> +
>> +static struct clk_regmap dspa_0_sel = {
>> + .data = &(struct clk_regmap_mux_data) {
>> + .offset = CLKCTRL_DSPA_CLK_CTRL0,
>> + .mask = 0x7,
>> + .shift = 10,
>> + .table = dspa_parent_table,
>> + },
>> + .hw.init = &(struct clk_init_data) {
>> + .name = "dspa_0_sel",
>> + .ops = &clk_regmap_mux_ops,
>> + .parent_data = dspa_parent_data,
>> + .num_parents = ARRAY_SIZE(dspa_parent_data),
>> + },
>> +};
>> +
>> +static struct clk_regmap dspa_0_div = {
>> + .data = &(struct clk_regmap_div_data) {
>> + .offset = CLKCTRL_DSPA_CLK_CTRL0,
>> + .shift = 0,
>> + .width = 10,
>> + },
>> + .hw.init = &(struct clk_init_data) {
>> + .name = "dspa_0_div",
>> + .ops = &clk_regmap_divider_ops,
>> + .parent_hws = (const struct clk_hw *[]) {
>> + &dspa_0_sel.hw
>> + },
>> + .num_parents = 1,
>> + .flags = CLK_SET_RATE_PARENT,
>> + },
>> +};
>> +
>> +static struct clk_regmap dspa_0 = {
>> + .data = &(struct clk_regmap_gate_data) {
>> + .offset = CLKCTRL_DSPA_CLK_CTRL0,
>> + .bit_idx = 13,
>> + },
>> + .hw.init = &(struct clk_init_data) {
>> + .name = "dspa_0",
>> + .ops = &clk_regmap_gate_ops,
>> + .parent_hws = (const struct clk_hw *[]) {
>> + &dspa_0_div.hw
>> + },
>> + .num_parents = 1,
>> + .flags = CLK_SET_RATE_GATE | CLK_SET_RATE_PARENT,
>> + },
>> +};
>> +
>> +static struct clk_regmap dspa_1_sel = {
>> + .data = &(struct clk_regmap_mux_data) {
>> + .offset = CLKCTRL_DSPA_CLK_CTRL0,
>> + .mask = 0x7,
>> + .shift = 26,
>> + },
>> + .hw.init = &(struct clk_init_data) {
>> + .name = "dspa_1_sel",
>> + .ops = &clk_regmap_mux_ops,
>> + .parent_data = dspa_parent_data,
>> + .num_parents = ARRAY_SIZE(dspa_parent_data),
>> + },
>> +};
>> +
>> +static struct clk_regmap dspa_1_div = {
>> + .data = &(struct clk_regmap_div_data) {
>> + .offset = CLKCTRL_DSPA_CLK_CTRL0,
>> + .shift = 16,
>> + .width = 10,
>> + },
>> + .hw.init = &(struct clk_init_data) {
>> + .name = "dspa_1_div",
>> + .ops = &clk_regmap_divider_ops,
>> + .parent_hws = (const struct clk_hw *[]) {
>> + &dspa_1_sel.hw
>> + },
>> + .num_parents = 1,
>> + .flags = CLK_SET_RATE_PARENT,
>> + },
>> +};
>> +
>> +static struct clk_regmap dspa_1 = {
>> + .data = &(struct clk_regmap_gate_data) {
>> + .offset = CLKCTRL_DSPA_CLK_CTRL0,
>> + .bit_idx = 29,
>> + },
>> + .hw.init = &(struct clk_init_data) {
>> + .name = "dspa_1",
>> + .ops = &clk_regmap_gate_ops,
>> + .parent_hws = (const struct clk_hw *[]) {
>> + &dspa_1_div.hw
>> + },
>> + .num_parents = 1,
>> + .flags = CLK_SET_RATE_GATE | CLK_SET_RATE_PARENT,
>> + },
>> +};
>> +
>> +static struct clk_regmap dspa = {
>> + .data = &(struct clk_regmap_mux_data){
>> + .offset = CLKCTRL_DSPA_CLK_CTRL0,
>> + .mask = 0x1,
>> + .shift = 15,
>> + },
>> + .hw.init = &(struct clk_init_data) {
>> + .name = "dspa",
>> + .ops = &clk_regmap_mux_ops,
>> + .parent_hws = (const struct clk_hw *[]) {
>> + &dspa_0.hw,
>> + &dspa_1.hw
>> + },
>> + .num_parents = 2,
>> + /*
>> + * NOTE: This level of mux is "no glitch mux", and mux_0
>> + * (here dspa_0) is not only the clock source for mux, but also
>> + * provides a working clock for "no glitch mux". "no glitch mux"
>> + * can be switched only when mux_0 has a clock input. Therefore,
>> + * add flag CLK_OPS_PARENT_ENABLE to ensure that mux_0 has clock
>> + * when "no glitch mux" works.
>> + */
>> + .flags = CLK_SET_RATE_PARENT | CLK_OPS_PARENT_ENABLE,
>> + },
>> +};
>> +
>> +/* Channel 6 is gp1. */
>> +static u32 nna_parent_table[] = { 0, 1, 2, 3, 4, 5, 7};
>> +
>> +static const struct clk_parent_data nna_parent_data[] = {
>> + { .fw_name = "oscin" },
>> + { .fw_name = "fdiv2p5" },
>> + { .fw_name = "fdiv4" },
>> + { .fw_name = "fdiv3" },
>> + { .fw_name = "fdiv5" },
>> + { .fw_name = "fdiv2" },
>> + { .fw_name = "hifi" }
>> +};
>> +
>> +static struct clk_regmap nna_core_sel = {
>> + .data = &(struct clk_regmap_mux_data) {
>> + .offset = CLKCTRL_NNA_CLK_CNTL,
>> + .mask = 0x7,
>> + .shift = 9,
>> + .table = nna_parent_table,
>> + },
>> + .hw.init = &(struct clk_init_data) {
>> + .name = "nna_core_sel",
>> + .ops = &clk_regmap_mux_ops,
>> + .parent_data = nna_parent_data,
>> + .num_parents = ARRAY_SIZE(nna_parent_data),
>> + },
>> +};
>> +
>> +static struct clk_regmap nna_core_div = {
>> + .data = &(struct clk_regmap_div_data) {
>> + .offset = CLKCTRL_NNA_CLK_CNTL,
>> + .shift = 0,
>> + .width = 7,
>> + },
>> + .hw.init = &(struct clk_init_data) {
>> + .name = "nna_core_div",
>> + .ops = &clk_regmap_divider_ops,
>> + .parent_hws = (const struct clk_hw *[]) {
>> + &nna_core_sel.hw
>> + },
>> + .num_parents = 1,
>> + .flags = CLK_SET_RATE_PARENT,
>> + },
>> +};
>> +
>> +static struct clk_regmap nna_core = {
>> + .data = &(struct clk_regmap_gate_data) {
>> + .offset = CLKCTRL_NNA_CLK_CNTL,
>> + .bit_idx = 8,
>> + },
>> + .hw.init = &(struct clk_init_data) {
>> + .name = "nna_core",
>> + .ops = &clk_regmap_gate_ops,
>> + .parent_hws = (const struct clk_hw *[]) {
>> + &nna_core_div.hw
>> + },
>> + .num_parents = 1,
>> + .flags = CLK_SET_RATE_PARENT,
>> + },
>> +};
>> +
>> +static struct clk_regmap nna_axi_sel = {
>> + .data = &(struct clk_regmap_mux_data) {
>> + .offset = CLKCTRL_NNA_CLK_CNTL,
>> + .mask = 0x7,
>> + .shift = 25,
>> + },
>> + .hw.init = &(struct clk_init_data) {
>> + .name = "nna_axi_sel",
>> + .ops = &clk_regmap_mux_ops,
>> + .parent_data = nna_parent_data,
>> + .num_parents = ARRAY_SIZE(nna_parent_data),
>> + },
>> +};
>> +
>> +static struct clk_regmap nna_axi_div = {
>> + .data = &(struct clk_regmap_div_data) {
>> + .offset = CLKCTRL_NNA_CLK_CNTL,
>> + .shift = 16,
>> + .width = 7,
>> + },
>> + .hw.init = &(struct clk_init_data) {
>> + .name = "nna_axi_div",
>> + .ops = &clk_regmap_divider_ops,
>> + .parent_hws = (const struct clk_hw *[]) {
>> + &nna_axi_sel.hw
>> + },
>> + .num_parents = 1,
>> + .flags = CLK_SET_RATE_PARENT,
>> + },
>> +};
>> +
>> +static struct clk_regmap nna_axi = {
>> + .data = &(struct clk_regmap_gate_data) {
>> + .offset = CLKCTRL_NNA_CLK_CNTL,
>> + .bit_idx = 24,
>> + },
>> + .hw.init = &(struct clk_init_data) {
>> + .name = "nna_axi",
>> + .ops = &clk_regmap_gate_ops,
>> + .parent_hws = (const struct clk_hw *[]) {
>> + &nna_axi_div.hw
>> + },
>> + .num_parents = 1,
>> + .flags = CLK_SET_RATE_PARENT,
>> + },
>> +};
>> +
>> +static struct clk_hw *a5_periphs_hw_clks[] = {
>> + [CLKID_RTC_XTAL_CLKIN] = &rtc_xtal_clkin.hw,
>> + [CLKID_RTC_32K_DIV] = &rtc_32k_div.hw,
>> + [CLKID_RTC_32K_MUX] = &rtc_32k_mux.hw,
>> + [CLKID_RTC_32K] = &rtc_32k.hw,
>> + [CLKID_RTC_CLK] = &rtc_clk.hw,
>> + [CLKID_SYS_RESET_CTRL] = &sys_reset_ctrl.hw,
>> + [CLKID_SYS_PWR_CTRL] = &sys_pwr_ctrl.hw,
>> + [CLKID_SYS_PAD_CTRL] = &sys_pad_ctrl.hw,
>> + [CLKID_SYS_CTRL] = &sys_ctrl.hw,
>> + [CLKID_SYS_TS_PLL] = &sys_ts_pll.hw,
>> + [CLKID_SYS_DEV_ARB] = &sys_dev_arb.hw,
>> + [CLKID_SYS_MAILBOX] = &sys_mailbox.hw,
>> + [CLKID_SYS_JTAG_CTRL] = &sys_jtag_ctrl.hw,
>> + [CLKID_SYS_IR_CTRL] = &sys_ir_ctrl.hw,
>> + [CLKID_SYS_MSR_CLK] = &sys_msr_clk.hw,
>> + [CLKID_SYS_ROM] = &sys_rom.hw,
>> + [CLKID_SYS_CPU_ARB] = &sys_cpu_apb.hw,
>> + [CLKID_SYS_RSA] = &sys_rsa.hw,
>> + [CLKID_SYS_SAR_ADC] = &sys_sar_adc.hw,
>> + [CLKID_SYS_STARTUP] = &sys_startup.hw,
>> + [CLKID_SYS_SECURE] = &sys_secure.hw,
>> + [CLKID_SYS_SPIFC] = &sys_spifc.hw,
>> + [CLKID_SYS_DSPA] = &sys_dspa.hw,
>> + [CLKID_SYS_NNA] = &sys_nna.hw,
>> + [CLKID_SYS_ETH_MAC] = &sys_eth_mac.hw,
>> + [CLKID_SYS_RAMA] = &sys_rama.hw,
>> + [CLKID_SYS_RAMB] = &sys_ramb.hw,
>> + [CLKID_SYS_AUDIO_TOP] = &sys_audio_top.hw,
>> + [CLKID_SYS_AUDIO_VAD] = &sys_audio_vad.hw,
>> + [CLKID_SYS_USB] = &sys_usb.hw,
>> + [CLKID_SYS_SD_EMMC_A] = &sys_sd_emmc_a.hw,
>> + [CLKID_SYS_SD_EMMC_C] = &sys_sd_emmc_c.hw,
>> + [CLKID_SYS_PWM_AB] = &sys_pwm_ab.hw,
>> + [CLKID_SYS_PWM_CD] = &sys_pwm_cd.hw,
>> + [CLKID_SYS_PWM_EF] = &sys_pwm_ef.hw,
>> + [CLKID_SYS_PWM_GH] = &sys_pwm_gh.hw,
>> + [CLKID_SYS_SPICC_1] = &sys_spicc_1.hw,
>> + [CLKID_SYS_SPICC_0] = &sys_spicc_0.hw,
>> + [CLKID_SYS_UART_A] = &sys_uart_a.hw,
>> + [CLKID_SYS_UART_B] = &sys_uart_b.hw,
>> + [CLKID_SYS_UART_C] = &sys_uart_c.hw,
>> + [CLKID_SYS_UART_D] = &sys_uart_d.hw,
>> + [CLKID_SYS_UART_E] = &sys_uart_e.hw,
>> + [CLKID_SYS_I2C_M_A] = &sys_i2c_m_a.hw,
>> + [CLKID_SYS_I2C_M_B] = &sys_i2c_m_b.hw,
>> + [CLKID_SYS_I2C_M_C] = &sys_i2c_m_c.hw,
>> + [CLKID_SYS_I2C_M_D] = &sys_i2c_m_d.hw,
>> + [CLKID_SYS_RTC] = &sys_rtc.hw,
>> + [CLKID_AXI_AUDIO_VAD] = &axi_audio_vad.hw,
>> + [CLKID_AXI_AUDIO_TOP] = &axi_audio_top.hw,
>> + [CLKID_AXI_RAMB] = &axi_ramb.hw,
>> + [CLKID_AXI_RAMA] = &axi_rama.hw,
>> + [CLKID_AXI_NNA] = &axi_nna.hw,
>> + [CLKID_AXI_DEV1_DMC] = &axi_dev1_dmc.hw,
>> + [CLKID_AXI_DEV0_DMC] = &axi_dev0_dmc.hw,
>> + [CLKID_AXI_DSP_DMC] = &axi_dsp_dmc.hw,
>> + [CLKID_12_24M_IN] = &clk_12_24m_in.hw,
>> + [CLKID_12M_24M] = &clk_12_24m.hw,
>> + [CLKID_FCLK_25M_DIV] = &fclk_25m_div.hw,
>> + [CLKID_FCLK_25M] = &fclk_25m.hw,
>> + [CLKID_GEN_SEL] = &gen_sel.hw,
>> + [CLKID_GEN_DIV] = &gen_div.hw,
>> + [CLKID_GEN] = &gen.hw,
>> + [CLKID_SARADC_SEL] = &saradc_sel.hw,
>> + [CLKID_SARADC_DIV] = &saradc_div.hw,
>> + [CLKID_SARADC] = &saradc.hw,
>> + [CLKID_PWM_A_SEL] = &pwm_a_sel.hw,
>> + [CLKID_PWM_A_DIV] = &pwm_a_div.hw,
>> + [CLKID_PWM_A] = &pwm_a.hw,
>> + [CLKID_PWM_B_SEL] = &pwm_b_sel.hw,
>> + [CLKID_PWM_B_DIV] = &pwm_b_div.hw,
>> + [CLKID_PWM_B] = &pwm_b.hw,
>> + [CLKID_PWM_C_SEL] = &pwm_c_sel.hw,
>> + [CLKID_PWM_C_DIV] = &pwm_c_div.hw,
>> + [CLKID_PWM_C] = &pwm_c.hw,
>> + [CLKID_PWM_D_SEL] = &pwm_d_sel.hw,
>> + [CLKID_PWM_D_DIV] = &pwm_d_div.hw,
>> + [CLKID_PWM_D] = &pwm_d.hw,
>> + [CLKID_PWM_E_SEL] = &pwm_e_sel.hw,
>> + [CLKID_PWM_E_DIV] = &pwm_e_div.hw,
>> + [CLKID_PWM_E] = &pwm_e.hw,
>> + [CLKID_PWM_F_SEL] = &pwm_f_sel.hw,
>> + [CLKID_PWM_F_DIV] = &pwm_f_div.hw,
>> + [CLKID_PWM_F] = &pwm_f.hw,
>> + [CLKID_PWM_G_SEL] = &pwm_g_sel.hw,
>> + [CLKID_PWM_G_DIV] = &pwm_g_div.hw,
>> + [CLKID_PWM_G] = &pwm_g.hw,
>> + [CLKID_PWM_H_SEL] = &pwm_h_sel.hw,
>> + [CLKID_PWM_H_DIV] = &pwm_h_div.hw,
>> + [CLKID_PWM_H] = &pwm_h.hw,
>> + [CLKID_SPICC_0_SEL] = &spicc_0_sel.hw,
>> + [CLKID_SPICC_0_DIV] = &spicc_0_div.hw,
>> + [CLKID_SPICC_0] = &spicc_0.hw,
>> + [CLKID_SPICC_1_SEL] = &spicc_1_sel.hw,
>> + [CLKID_SPICC_1_DIV] = &spicc_1_div.hw,
>> + [CLKID_SPICC_1] = &spicc_1.hw,
>> + [CLKID_SD_EMMC_A_SEL] = &sd_emmc_a_sel.hw,
>> + [CLKID_SD_EMMC_A_DIV] = &sd_emmc_a_div.hw,
>> + [CLKID_SD_EMMC_A] = &sd_emmc_a.hw,
>> + [CLKID_SD_EMMC_C_SEL] = &sd_emmc_c_sel.hw,
>> + [CLKID_SD_EMMC_C_DIV] = &sd_emmc_c_div.hw,
>> + [CLKID_SD_EMMC_C] = &sd_emmc_c.hw,
>> + [CLKID_TS_DIV] = &ts_div.hw,
>> + [CLKID_TS] = &ts.hw,
>> + [CLKID_ETH_125M_DIV] = ð_125m_div.hw,
>> + [CLKID_ETH_125M] = ð_125m.hw,
>> + [CLKID_ETH_RMII_DIV] = ð_rmii_div.hw,
>> + [CLKID_ETH_RMII] = ð_rmii.hw,
>> + [CLKID_DSPA_0_SEL] = &dspa_0_sel.hw,
>> + [CLKID_DSPA_0_DIV] = &dspa_0_div.hw,
>> + [CLKID_DSPA_0] = &dspa_0.hw,
>> + [CLKID_DSPA_1_SEL] = &dspa_1_sel.hw,
>> + [CLKID_DSPA_1_DIV] = &dspa_1_div.hw,
>> + [CLKID_DSPA_1] = &dspa_1.hw,
>> + [CLKID_DSPA] = &dspa.hw,
>> + [CLKID_NNA_CORE_SEL] = &nna_core_sel.hw,
>> + [CLKID_NNA_CORE_DIV] = &nna_core_div.hw,
>> + [CLKID_NNA_CORE] = &nna_core.hw,
>> + [CLKID_NNA_AXI_SEL] = &nna_axi_sel.hw,
>> + [CLKID_NNA_AXI_DIV] = &nna_axi_div.hw,
>> + [CLKID_NNA_AXI] = &nna_axi.hw,
>> +};
>> +
>> +/* Convenience table to populate regmap in .probe */
>> +static struct clk_regmap *const a5_periphs_clk_regmaps[] = {
>> + &rtc_xtal_clkin,
>> + &rtc_32k_div,
>> + &rtc_32k_mux,
>> + &rtc_32k,
>> + &rtc_clk,
>> + &sys_reset_ctrl,
>> + &sys_pwr_ctrl,
>> + &sys_pad_ctrl,
>> + &sys_ctrl,
>> + &sys_ts_pll,
>> + &sys_dev_arb,
>> + &sys_mailbox,
>> + &sys_jtag_ctrl,
>> + &sys_ir_ctrl,
>> + &sys_msr_clk,
>> + &sys_rom,
>> + &sys_cpu_apb,
>> + &sys_rsa,
>> + &sys_sar_adc,
>> + &sys_startup,
>> + &sys_secure,
>> + &sys_spifc,
>> + &sys_dspa,
>> + &sys_nna,
>> + &sys_eth_mac,
>> + &sys_rama,
>> + &sys_ramb,
>> + &sys_audio_top,
>> + &sys_audio_vad,
>> + &sys_usb,
>> + &sys_sd_emmc_a,
>> + &sys_sd_emmc_c,
>> + &sys_pwm_ab,
>> + &sys_pwm_cd,
>> + &sys_pwm_ef,
>> + &sys_pwm_gh,
>> + &sys_spicc_1,
>> + &sys_spicc_0,
>> + &sys_uart_a,
>> + &sys_uart_b,
>> + &sys_uart_c,
>> + &sys_uart_d,
>> + &sys_uart_e,
>> + &sys_i2c_m_a,
>> + &sys_i2c_m_b,
>> + &sys_i2c_m_c,
>> + &sys_i2c_m_d,
>> + &sys_rtc,
>> + &axi_audio_vad,
>> + &axi_audio_top,
>> + &axi_ramb,
>> + &axi_rama,
>> + &axi_nna,
>> + &axi_dev1_dmc,
>> + &axi_dev0_dmc,
>> + &axi_dsp_dmc,
>> + &clk_12_24m_in,
>> + &clk_12_24m,
>> + &fclk_25m_div,
>> + &fclk_25m,
>> + &gen_sel,
>> + &gen_div,
>> + &gen,
>> + &saradc_sel,
>> + &saradc_div,
>> + &saradc,
>> + &pwm_a_sel,
>> + &pwm_a_div,
>> + &pwm_a,
>> + &pwm_b_sel,
>> + &pwm_b_div,
>> + &pwm_b,
>> + &pwm_c_sel,
>> + &pwm_c_div,
>> + &pwm_c,
>> + &pwm_d_sel,
>> + &pwm_d_div,
>> + &pwm_d,
>> + &pwm_e_sel,
>> + &pwm_e_div,
>> + &pwm_e,
>> + &pwm_f_sel,
>> + &pwm_f_div,
>> + &pwm_f,
>> + &pwm_g_sel,
>> + &pwm_g_div,
>> + &pwm_g,
>> + &pwm_h_sel,
>> + &pwm_h_div,
>> + &pwm_h,
>> + &spicc_0_sel,
>> + &spicc_0_div,
>> + &spicc_0,
>> + &spicc_1_sel,
>> + &spicc_1_div,
>> + &spicc_1,
>> + &sd_emmc_a_sel,
>> + &sd_emmc_a_div,
>> + &sd_emmc_a,
>> + &sd_emmc_c_sel,
>> + &sd_emmc_c_div,
>> + &sd_emmc_c,
>> + &ts_div,
>> + &ts,
>> + ð_125m,
>> + ð_rmii_div,
>> + ð_rmii,
>> + &dspa_0_sel,
>> + &dspa_0_div,
>> + &dspa_0,
>> + &dspa_1_sel,
>> + &dspa_1_div,
>> + &dspa_1,
>> + &dspa,
>> + &nna_core_sel,
>> + &nna_core_div,
>> + &nna_core,
>> + &nna_axi_sel,
>> + &nna_axi_div,
>> + &nna_axi
>> +};
>> +
>> +static const struct regmap_config clkc_regmap_config = {
>> + .reg_bits = 32,
>> + .val_bits = 32,
>> + .reg_stride = 4,
>> + .max_register = CLKCTRL_NNA_CLK_CNTL,
>> +};
>> +
>> +static struct meson_clk_hw_data a5_periphs_clks = {
>> + .hws = a5_periphs_hw_clks,
>> + .num = ARRAY_SIZE(a5_periphs_hw_clks),
>> +};
>> +
>> +static int aml_a5_peripherals_probe(struct platform_device *pdev)
>> +{
>> + struct device *dev = &pdev->dev;
>> + struct regmap *regmap;
>> + void __iomem *base;
>> + int clkid, ret, i;
>> +
>> + base = devm_platform_ioremap_resource(pdev, 0);
>> + if (IS_ERR(base))
>> + return PTR_ERR(base);
>> +
>> + regmap = devm_regmap_init_mmio(dev, base, &clkc_regmap_config);
>> + if (IS_ERR(regmap))
>> + return PTR_ERR(regmap);
>> +
>> + /* Populate regmap for the regmap backed clocks */
>> + for (i = 0; i < ARRAY_SIZE(a5_periphs_clk_regmaps); i++)
>> + a5_periphs_clk_regmaps[i]->map = regmap;
>> +
>> + for (clkid = 0; clkid < a5_periphs_clks.num; clkid++) {
>> + /* array might be sparse */
>> + if (!a5_periphs_clks.hws[clkid])
>> + continue;
>> +
>> + ret = devm_clk_hw_register(dev, a5_periphs_clks.hws[clkid]);
>> + if (ret) {
>> + dev_err(dev, "Clock registration failed\n");
>> + return ret;
>> + }
>> + }
>> +
>> + return devm_of_clk_add_hw_provider(dev, meson_clk_hw_get,
>> + &a5_periphs_clks);
>> +}
>> +
>> +static const struct of_device_id a5_peripherals_clkc_match_table[] = {
>> + {
>> + .compatible = "amlogic,a5-peripherals-clkc",
>> + },
>> + { /* sentinel */ }
>> +};
>> +
>> +MODULE_DEVICE_TABLE(of, a5_peripherals_clkc_match_table);
>> +
>> +static struct platform_driver a5_peripherals_driver = {
>> + .probe = aml_a5_peripherals_probe,
>> + .driver = {
>> + .name = "a5-peripherals-clkc",
>> + .of_match_table = a5_peripherals_clkc_match_table,
>> + },
>> +};
>> +module_platform_driver(a5_peripherals_driver);
>> +
>> +MODULE_DESCRIPTION("Amlogic A5 Peripherals Clock Controller driver");
>> +MODULE_AUTHOR("Chuan Liu <chuan.liu@...ogic.com>");
>> +MODULE_LICENSE("GPL");
>> diff --git a/drivers/clk/meson/clk-regmap.h b/drivers/clk/meson/clk-regmap.h
>> index e365312da54e..1e592d809bfd 100644
>> --- a/drivers/clk/meson/clk-regmap.h
>> +++ b/drivers/clk/meson/clk-regmap.h
>> @@ -134,4 +134,21 @@ struct clk_regmap _name = { \
>>
>> #define MESON_PCLK_RO(_name, _reg, _bit, _pname) \
>> __MESON_PCLK(_name, _reg, _bit, &clk_regmap_gate_ro_ops, _pname)
>> +
>
> No Amlogic specific clocks should be added to this header.
> This was meant to be generic.
>
>> +#define MESON_CLK_GATE_FW(_name, _reg, _bit, _fw_name, _ops, _flags) \
>> +struct clk_regmap _name = { \
>> + .data = &(struct clk_regmap_gate_data){ \
>> + .offset = (_reg), \
>> + .bit_idx = (_bit), \
>> + }, \
>> + .hw.init = &(struct clk_init_data) { \
>> + .name = #_name, \
>> + .ops = _ops, \
>> + .parent_data = &(const struct clk_parent_data) { \
>> + .fw_name = #_fw_name, \
>
> I think is making the macro difficult to read when used. Pass a string,
> that will be a lot more clear and will not look like a weird identitier.
>
Will do.
>> + }, \
>> + .num_parents = 1, \
>> + .flags = (_flags), \
>> + }, \
>> +}
>
> Given that this is used in A5 only for now, I don't think this needs to
> be in a header just yet. You'll modify this when needed.
>
OK, I will place it to source file now.
>> #endif /* __CLK_REGMAP_H */
>
> --
> Jerome
Powered by blists - more mailing lists