| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <cf45ed95fe0be083446d5aaf5f946f38acba7728.1733920873.git.michal.simek@amd.com>
Date: Wed, 11 Dec 2024 13:41:20 +0100
From: Michal Simek <michal.simek@....com>
To: <linux-kernel@...r.kernel.org>, <monstr@...str.eu>,
<michal.simek@...inx.com>, <git@...inx.com>
CC: Sai Krishna Potthuri <lakshmi.sai.krishna.potthuri@...inx.com>, "Conor
Dooley" <conor+dt@...nel.org>, Krzysztof Kozlowski <krzk+dt@...nel.org>, "Rob
Herring" <robh@...nel.org>, "open list:OPEN FIRMWARE AND FLATTENED DEVICE
TREE BINDINGS" <devicetree@...r.kernel.org>, "moderated list:ARM/ZYNQ
ARCHITECTURE" <linux-arm-kernel@...ts.infradead.org>
Subject: [PATCH 01/15] ARM: zynq: Replace 'io-standard' with 'power-source' property
From: Sai Krishna Potthuri <lakshmi.sai.krishna.potthuri@...inx.com>
Replace 'io-standard' property with 'power-source' property in all
zynq dts files to be in sync with Zynq Pinctrl driver.
Signed-off-by: Sai Krishna Potthuri <lakshmi.sai.krishna.potthuri@...inx.com>
Signed-off-by: Michal Simek <michal.simek@...inx.com>
Signed-off-by: Michal Simek <michal.simek@....com>
---
arch/arm/boot/dts/xilinx/zynq-zc702.dts | 22 +++++++++++-----------
arch/arm/boot/dts/xilinx/zynq-zc706.dts | 18 +++++++++---------
2 files changed, 20 insertions(+), 20 deletions(-)
diff --git a/arch/arm/boot/dts/xilinx/zynq-zc702.dts b/arch/arm/boot/dts/xilinx/zynq-zc702.dts
index 6efdbca9d3ef..a933c0341b69 100644
--- a/arch/arm/boot/dts/xilinx/zynq-zc702.dts
+++ b/arch/arm/boot/dts/xilinx/zynq-zc702.dts
@@ -210,7 +210,7 @@ mux {
conf {
groups = "can0_9_grp";
slew-rate = <0>;
- io-standard = <1>;
+ power-source = <1>;
};
conf-rx {
@@ -233,7 +233,7 @@ mux {
conf {
groups = "ethernet0_0_grp";
slew-rate = <0>;
- io-standard = <4>;
+ power-source = <4>;
};
conf-rx {
@@ -256,7 +256,7 @@ mux-mdio {
conf-mdio {
groups = "mdio0_0_grp";
slew-rate = <0>;
- io-standard = <1>;
+ power-source = <1>;
bias-disable;
};
};
@@ -274,7 +274,7 @@ conf {
"gpio0_10_grp", "gpio0_11_grp", "gpio0_12_grp",
"gpio0_13_grp", "gpio0_14_grp";
slew-rate = <0>;
- io-standard = <1>;
+ power-source = <1>;
};
conf-pull-up {
@@ -298,7 +298,7 @@ conf {
groups = "i2c0_10_grp";
bias-pull-up;
slew-rate = <0>;
- io-standard = <1>;
+ power-source = <1>;
};
};
@@ -311,7 +311,7 @@ mux {
conf {
groups = "gpio0_50_grp", "gpio0_51_grp";
slew-rate = <0>;
- io-standard = <1>;
+ power-source = <1>;
};
};
@@ -324,7 +324,7 @@ mux {
conf {
groups = "sdio0_2_grp";
slew-rate = <0>;
- io-standard = <1>;
+ power-source = <1>;
bias-disable;
};
@@ -338,7 +338,7 @@ conf-cd {
bias-high-impedance;
bias-pull-up;
slew-rate = <0>;
- io-standard = <1>;
+ power-source = <1>;
};
mux-wp {
@@ -351,7 +351,7 @@ conf-wp {
bias-high-impedance;
bias-pull-up;
slew-rate = <0>;
- io-standard = <1>;
+ power-source = <1>;
};
};
@@ -364,7 +364,7 @@ mux {
conf {
groups = "uart1_10_grp";
slew-rate = <0>;
- io-standard = <1>;
+ power-source = <1>;
};
conf-rx {
@@ -387,7 +387,7 @@ mux {
conf {
groups = "usb0_0_grp";
slew-rate = <0>;
- io-standard = <1>;
+ power-source = <1>;
};
conf-rx {
diff --git a/arch/arm/boot/dts/xilinx/zynq-zc706.dts b/arch/arm/boot/dts/xilinx/zynq-zc706.dts
index 77943c16d33f..d21e3ae4ebb2 100644
--- a/arch/arm/boot/dts/xilinx/zynq-zc706.dts
+++ b/arch/arm/boot/dts/xilinx/zynq-zc706.dts
@@ -150,7 +150,7 @@ mux {
conf {
groups = "ethernet0_0_grp";
slew-rate = <0>;
- io-standard = <4>;
+ power-source = <4>;
};
conf-rx {
@@ -173,7 +173,7 @@ mux-mdio {
conf-mdio {
groups = "mdio0_0_grp";
slew-rate = <0>;
- io-standard = <1>;
+ power-source = <1>;
bias-disable;
};
};
@@ -187,7 +187,7 @@ mux {
conf {
groups = "gpio0_7_grp", "gpio0_46_grp", "gpio0_47_grp";
slew-rate = <0>;
- io-standard = <1>;
+ power-source = <1>;
};
conf-pull-up {
@@ -211,7 +211,7 @@ conf {
groups = "i2c0_10_grp";
bias-pull-up;
slew-rate = <0>;
- io-standard = <1>;
+ power-source = <1>;
};
};
@@ -224,7 +224,7 @@ mux {
conf {
groups = "sdio0_2_grp";
slew-rate = <0>;
- io-standard = <1>;
+ power-source = <1>;
bias-disable;
};
@@ -238,7 +238,7 @@ conf-cd {
bias-high-impedance;
bias-pull-up;
slew-rate = <0>;
- io-standard = <1>;
+ power-source = <1>;
};
mux-wp {
@@ -251,7 +251,7 @@ conf-wp {
bias-high-impedance;
bias-pull-up;
slew-rate = <0>;
- io-standard = <1>;
+ power-source = <1>;
};
};
@@ -264,7 +264,7 @@ mux {
conf {
groups = "uart1_10_grp";
slew-rate = <0>;
- io-standard = <1>;
+ power-source = <1>;
};
conf-rx {
@@ -287,7 +287,7 @@ mux {
conf {
groups = "usb0_0_grp";
slew-rate = <0>;
- io-standard = <1>;
+ power-source = <1>;
};
conf-rx {
--
2.43.0
Powered by blists - more mailing lists