[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20241213175828.909987-3-prabhakar.mahadev-lad.rj@bp.renesas.com>
Date: Fri, 13 Dec 2024 17:58:21 +0000
From: Prabhakar <prabhakar.csengg@...il.com>
To: Chris Brandt <chris.brandt@...esas.com>,
Andi Shyti <andi.shyti@...nel.org>,
Philipp Zabel <p.zabel@...gutronix.de>,
Wolfram Sang <wsa@...nel.org>,
Geert Uytterhoeven <geert+renesas@...der.be>
Cc: linux-renesas-soc@...r.kernel.org,
linux-i2c@...r.kernel.org,
linux-kernel@...r.kernel.org,
Prabhakar <prabhakar.csengg@...il.com>,
Biju Das <biju.das.jz@...renesas.com>,
Fabrizio Castro <fabrizio.castro.jz@...esas.com>,
Lad Prabhakar <prabhakar.mahadev-lad.rj@...renesas.com>
Subject: [PATCH 2/9] i2c: riic: Use local `dev` pointer in `dev_err_probe()`
From: Lad Prabhakar <prabhakar.mahadev-lad.rj@...renesas.com>
Update the `riic_init_hw()` function to use the local `dev` pointer in
calls to `dev_err_probe()`. Previously, `riic_init_hw()` used
`riic->adapter.dev` in error reporting. Since this function is invoked
during the probe phase, the I2C adapter is not yet initialized, leading to
`(null) ...` being printed in error messages. This patch fixes the issue by
consistently using the local `dev` pointer, which points to
`riic->adapter.dev.parent`.
Additionally, replace `dev_err()` with `dev_err_probe()` throughout
`riic_init_hw()` for consistency.
Fixes: d982d66514192 ("i2c: riic: remove clock and frequency restrictions")
Fixes: 71dacb2565ed (i2c: riic: Simplify unsupported bus speed handling")
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@...renesas.com>
---
drivers/i2c/busses/i2c-riic.c | 10 ++++------
1 file changed, 4 insertions(+), 6 deletions(-)
diff --git a/drivers/i2c/busses/i2c-riic.c b/drivers/i2c/busses/i2c-riic.c
index 7ab32aeead4b..d01bb52d86ed 100644
--- a/drivers/i2c/busses/i2c-riic.c
+++ b/drivers/i2c/busses/i2c-riic.c
@@ -320,7 +320,7 @@ static int riic_init_hw(struct riic_dev *riic)
: I2C_MAX_FAST_MODE_FREQ;
if (t->bus_freq_hz > max_freq)
- return dev_err_probe(&riic->adapter.dev, -EINVAL,
+ return dev_err_probe(dev, -EINVAL,
"unsupported bus speed %uHz (%u max)\n",
t->bus_freq_hz, max_freq);
@@ -356,11 +356,9 @@ static int riic_init_hw(struct riic_dev *riic)
rate /= 2;
}
- if (brl > (0x1F + 3)) {
- dev_err(&riic->adapter.dev, "invalid speed (%lu). Too slow.\n",
- (unsigned long)t->bus_freq_hz);
- return -EINVAL;
- }
+ if (brl > (0x1F + 3))
+ return dev_err_probe(dev, -EINVAL, "invalid speed (%lu). Too slow.\n",
+ (unsigned long)t->bus_freq_hz);
brh = total_ticks - brl;
--
2.43.0
Powered by blists - more mailing lists