linux-kernel - Re: [PATCH 3/3] xlnx: dt-bindings: xlnx,spdif: Convert to json-schema

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <173411529693.1996544.10315799423274402409.robh@kernel.org>
Date: Fri, 13 Dec 2024 12:41:40 -0600
From: "Rob Herring (Arm)" <robh@...nel.org>
To: Vincenzo Frascino <vincenzo.frascino@....com>
Cc: Maruthi Srinivas Bayyavarapu <maruthi.srinivas.bayyavarapu@...inx.com>, 
 Sudeep Holla <sudeep.holla@....com>, linux-kernel@...r.kernel.org, 
 devicetree@...r.kernel.org
Subject: Re: [PATCH 3/3] xlnx: dt-bindings: xlnx,spdif: Convert to
 json-schema


On Fri, 13 Dec 2024 16:52:40 +0000, Vincenzo Frascino wrote:
> Convert the Xilinx SPDIF 2.0 device tree binding documentation to
> json-schema.
> 
> Signed-off-by: Vincenzo Frascino <vincenzo.frascino@....com>
> ---
>  .../devicetree/bindings/sound/xlnx,spdif.txt  |  28 -----
>  .../devicetree/bindings/sound/xlnx,spdif.yaml | 100 ++++++++++++++++++
>  2 files changed, 100 insertions(+), 28 deletions(-)
>  delete mode 100644 Documentation/devicetree/bindings/sound/xlnx,spdif.txt
>  create mode 100644 Documentation/devicetree/bindings/sound/xlnx,spdif.yaml
> 

My bot found errors running 'make dt_binding_check' on your patch:

yamllint warnings/errors:

dtschema/dtc warnings/errors:
/builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/sound/xlnx,spdif.yaml: xlnx,aud_clk_i: missing type definition
/builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/sound/xlnx,spdif.yaml: properties:xlnx,spdif-mode: 'minimum' should not be valid under {'enum': ['const', 'enum', 'exclusiveMaximum', 'exclusiveMinimum', 'minimum', 'maximum', 'multipleOf', 'pattern']}
	hint: Scalar and array keywords cannot be mixed
	from schema $id: http://devicetree.org/meta-schemas/keywords.yaml#
/builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/sound/xlnx,spdif.yaml: properties:xlnx,spdif-mode: 'maximum' should not be valid under {'enum': ['const', 'enum', 'exclusiveMaximum', 'exclusiveMinimum', 'minimum', 'maximum', 'multipleOf', 'pattern']}
	hint: Scalar and array keywords cannot be mixed
	from schema $id: http://devicetree.org/meta-schemas/keywords.yaml#
/builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/sound/xlnx,spdif.yaml: properties:xlnx,spdif-mode:maxItems: False schema does not allow 1
	hint: Scalar properties should not have array keywords
	from schema $id: http://devicetree.org/meta-schemas/keywords.yaml#
/builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/sound/xlnx,spdif.yaml: title: 'Device-Tree bindings for Xilinx SPDIF IP' should not be valid under {'pattern': '([Bb]inding| [Ss]chema)'}
	hint: Everything is a binding/schema, no need to say it. Describe what hardware the binding is for.
	from schema $id: http://devicetree.org/meta-schemas/base.yaml#
/builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/sound/xlnx,spdif.example.dtb: spdif@...10000: reg: [[0, 2147549184], [0, 65536]] is too long
	from schema $id: http://devicetree.org/schemas/sound/xlnx,spdif.yaml#

doc reference errors (make refcheckdocs):

See https://patchwork.ozlabs.org/project/devicetree-bindings/patch/20241213165240.3652961-4-vincenzo.frascino@arm.com

The base for the series is generally the latest rc1. A different dependency
should be noted in *this* patch.

If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure 'yamllint' is installed and dt-schema is up to
date:

pip3 install dtschema --upgrade

Please check and re-submit after running the above command yourself. Note
that DT_SCHEMA_FILES can be set to your schema file to speed up checking
your schema. However, it must be unset to test all examples with your schema.