linux-kernel - Re: [PATCH 0/3] Add Samsung SPEEDY serial bus host controller driver

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite for Android: free password hash cracker in your pocket

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <0ff6f05f-fe6f-4433-a489-0447a165c8d0@kernel.org>
Date: Fri, 13 Dec 2024 09:42:57 +0100
From: Krzysztof Kozlowski <krzk@...nel.org>
To: Markuss Broks <markuss.broks@...il.com>, Rob Herring <robh@...nel.org>,
 Krzysztof Kozlowski <krzk+dt@...nel.org>, Conor Dooley
 <conor+dt@...nel.org>, Alim Akhtar <alim.akhtar@...sung.com>
Cc: linux-samsung-soc@...r.kernel.org, devicetree@...r.kernel.org,
 linux-arm-kernel@...ts.infradead.org, linux-kernel@...r.kernel.org,
 Ivaylo Ivanov <ivo.ivanov.ivanov1@...il.com>,
 Maksym Holovach <nergzd@...gzd723.xyz>
Subject: Re: [PATCH 0/3] Add Samsung SPEEDY serial bus host controller driver

On 12/12/2024 22:09, Markuss Broks wrote:
> Hey,
> 
> This series adds support for the Samsung SPEEDY serial bus host
> controller. Samsung SPEEDY (actually an acronym) is a proprietary
> Samsung 1 wire serial bus, which is used on various Samsung devices.
> 
It does not look like you tested the bindings, at least after quick
look. Please run `make dt_binding_check` (see
Documentation/devicetree/bindings/writing-schema.rst for instructions).
Maybe you need to update your dtschema and yamllint.

It does not look like you tested the DTS against bindings. Please run
`make dtbs_check W=1` (see
Documentation/devicetree/bindings/writing-schema.rst or
https://www.linaro.org/blog/tips-and-tricks-for-validating-devicetree-sources-with-the-devicetree-schema/
for instructions).

Please run standard kernel tools for static analysis, like coccinelle,
smatch and sparse, and fix reported warnings. Also please check for
warnings when building with W=1. Most of these commands (checks or W=1
build) can build specific targets, like some directory, to narrow the
scope to only your code. The code here looks like it needs a fix. Feel
free to get in touch if the warning is not clear.

Please run scripts/checkpatch.pl and fix reported warnings. Then please
run `scripts/checkpatch.pl --strict` and (probably) fix more warnings.
Some warnings can be ignored, especially from --strict run, but the code
here looks like it needs a fix. Feel free to get in touch if the warning
is not clear.

Best regards,
Krzysztof