[<prev] [next>] [day] [month] [year] [list]
Message-Id: <20241214-arm64-gcs-signal-sparse-v3-1-5e8d18fffc0c@kernel.org>
Date: Sat, 14 Dec 2024 02:12:06 +0000
From: Mark Brown <broonie@...nel.org>
To: Catalin Marinas <catalin.marinas@....com>,
Will Deacon <will@...nel.org>
Cc: Mark Rutland <mark.rutland@....com>,
linux-arm-kernel@...ts.infradead.org, linux-kernel@...r.kernel.org,
kernel test robot <lkp@...el.com>, Mark Brown <broonie@...nel.org>
Subject: [PATCH v3] arm64/signal: Silence sparse warning storing GCSPR_EL0
We are seeing a sparse warning in gcs_restore_signal():
arch/arm64/kernel/signal.c:1054:9: sparse: sparse: cast removes address space '__user' of expression
when storing the final GCSPR_EL0 value back into the register, caused by
the fact that write_sysreg_s() casts the value it writes to a u64 which
sparse sees as discarding the __userness of the pointer.
Avoid this by treating the address as an integer, casting to a pointer only
when using it to write to userspace.
While we're at it also inline gcs_signal_cap_valid() into it's one user
and make equivalent updates to gcs_signal_entry().
Reported-by: kernel test robot <lkp@...el.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202412082005.OBJ0BbWs-lkp@intel.com/
Signed-off-by: Mark Brown <broonie@...nel.org>
---
Changes in v3:
- Switch to working with u64 instead of pointers, adding casts to
pointers.
- Inline gcs_signal_cap_valid()
- Link to v2: https://lore.kernel.org/r/20241211-arm64-gcs-signal-sparse-v2-1-c22f37216135@kernel.org
Changes in v2:
- Use __force u64 rather than unsigned long.
- Tweak commit message.
- Link to v1: https://lore.kernel.org/r/20241210-arm64-gcs-signal-sparse-v1-1-26888bcd6f89@kernel.org
---
arch/arm64/kernel/signal.c | 35 +++++++++++++++--------------------
1 file changed, 15 insertions(+), 20 deletions(-)
diff --git a/arch/arm64/kernel/signal.c b/arch/arm64/kernel/signal.c
index 14ac6fdb872b9672e4b16a097f1b577aae8dec50..928bdaa51df19583e77b8480e8b9094fe5563c35 100644
--- a/arch/arm64/kernel/signal.c
+++ b/arch/arm64/kernel/signal.c
@@ -36,15 +36,8 @@
#include <asm/traps.h>
#include <asm/vdso.h>
-#ifdef CONFIG_ARM64_GCS
#define GCS_SIGNAL_CAP(addr) (((unsigned long)addr) & GCS_CAP_ADDR_MASK)
-static bool gcs_signal_cap_valid(u64 addr, u64 val)
-{
- return val == GCS_SIGNAL_CAP(addr);
-}
-#endif
-
/*
* Do a signal return; undo the signal stack. These are aligned to 128-bit.
*/
@@ -1062,8 +1055,7 @@ static int restore_sigframe(struct pt_regs *regs,
#ifdef CONFIG_ARM64_GCS
static int gcs_restore_signal(void)
{
- unsigned long __user *gcspr_el0;
- u64 cap;
+ u64 gcspr_el0, cap;
int ret;
if (!system_supports_gcs())
@@ -1072,7 +1064,7 @@ static int gcs_restore_signal(void)
if (!(current->thread.gcs_el0_mode & PR_SHADOW_STACK_ENABLE))
return 0;
- gcspr_el0 = (unsigned long __user *)read_sysreg_s(SYS_GCSPR_EL0);
+ gcspr_el0 = read_sysreg_s(SYS_GCSPR_EL0);
/*
* Ensure that any changes to the GCS done via GCS operations
@@ -1087,22 +1079,23 @@ static int gcs_restore_signal(void)
* then faults will be generated on GCS operations - the main
* concern is to protect GCS pages.
*/
- ret = copy_from_user(&cap, gcspr_el0, sizeof(cap));
+ ret = copy_from_user(&cap, (unsigned long __user *)gcspr_el0,
+ sizeof(cap));
if (ret)
return -EFAULT;
/*
* Check that the cap is the actual GCS before replacing it.
*/
- if (!gcs_signal_cap_valid((u64)gcspr_el0, cap))
+ if (cap != GCS_SIGNAL_CAP(gcspr_el0))
return -EINVAL;
/* Invalidate the token to prevent reuse */
- put_user_gcs(0, (__user void*)gcspr_el0, &ret);
+ put_user_gcs(0, (unsigned long __user *)gcspr_el0, &ret);
if (ret != 0)
return -EFAULT;
- write_sysreg_s(gcspr_el0 + 1, SYS_GCSPR_EL0);
+ write_sysreg_s(gcspr_el0 + 8, SYS_GCSPR_EL0);
return 0;
}
@@ -1421,7 +1414,7 @@ static int get_sigframe(struct rt_sigframe_user_layout *user,
static int gcs_signal_entry(__sigrestore_t sigtramp, struct ksignal *ksig)
{
- unsigned long __user *gcspr_el0;
+ u64 gcspr_el0;
int ret = 0;
if (!system_supports_gcs())
@@ -1434,18 +1427,20 @@ static int gcs_signal_entry(__sigrestore_t sigtramp, struct ksignal *ksig)
* We are entering a signal handler, current register state is
* active.
*/
- gcspr_el0 = (unsigned long __user *)read_sysreg_s(SYS_GCSPR_EL0);
+ gcspr_el0 = read_sysreg_s(SYS_GCSPR_EL0);
/*
* Push a cap and the GCS entry for the trampoline onto the GCS.
*/
- put_user_gcs((unsigned long)sigtramp, gcspr_el0 - 2, &ret);
- put_user_gcs(GCS_SIGNAL_CAP(gcspr_el0 - 1), gcspr_el0 - 1, &ret);
+ put_user_gcs((unsigned long)sigtramp,
+ (unsigned long __user *)(gcspr_el0 - 16), &ret);
+ put_user_gcs(GCS_SIGNAL_CAP(gcspr_el0 - 8),
+ (unsigned long __user *)(gcspr_el0 - 8), &ret);
if (ret != 0)
return ret;
- gcspr_el0 -= 2;
- write_sysreg_s((unsigned long)gcspr_el0, SYS_GCSPR_EL0);
+ gcspr_el0 -= 16;
+ write_sysreg_s(gcspr_el0, SYS_GCSPR_EL0);
return 0;
}
---
base-commit: fac04efc5c793dccbd07e2d59af9f90b7fc0dca4
change-id: 20241209-arm64-gcs-signal-sparse-53fa9cad67f7
Best regards,
--
Mark Brown <broonie@...nel.org>
Powered by blists - more mailing lists