| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20241215-msm8917-v9-8-bacaa26f3eef@mainlining.org>
Date: Sun, 15 Dec 2024 12:15:03 +0100
From: Barnabás Czémán <barnabas.czeman@...nlining.org>
To: Bjorn Andersson <andersson@...nel.org>,
Konrad Dybcio <konradybcio@...nel.org>, Rob Herring <robh@...nel.org>,
Krzysztof Kozlowski <krzk+dt@...nel.org>,
Conor Dooley <conor+dt@...nel.org>,
Linus Walleij <linus.walleij@...aro.org>, Amit Kucheria <amitk@...nel.org>,
Thara Gopinath <thara.gopinath@...il.com>,
"Rafael J. Wysocki" <rafael@...nel.org>,
Daniel Lezcano <daniel.lezcano@...aro.org>, Zhang Rui <rui.zhang@...el.com>,
Lukasz Luba <lukasz.luba@....com>, Joerg Roedel <joro@...tes.org>,
Will Deacon <will@...nel.org>, Robin Murphy <robin.murphy@....com>,
Srinivas Kandagatla <srinivas.kandagatla@...aro.org>
Cc: linux-arm-msm@...r.kernel.org, devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org, linux-gpio@...r.kernel.org,
linux-pm@...r.kernel.org, iommu@...ts.linux.dev,
Barnabás Czémán <barnabas.czeman@...nlining.org>,
Konrad Dybcio <konrad.dybcio@....qualcomm.com>
Subject: [PATCH v9 8/8] arm64: dts: qcom: Add Xiaomi Redmi 5A
Add initial support for Xiaomi Redmi 5A (riva).
Reviewed-by: Konrad Dybcio <konrad.dybcio@....qualcomm.com>
Signed-off-by: Barnabás Czémán <barnabas.czeman@...nlining.org>
---
arch/arm64/boot/dts/qcom/Makefile | 1 +
arch/arm64/boot/dts/qcom/msm8917-xiaomi-riva.dts | 333 +++++++++++++++++++++++
2 files changed, 334 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile
index 4686f2a8ddd897227360b4de48a0618499ad463e..ee9b262b0e0fc3ec9d6515174c33f8b69b524842 100644
--- a/arch/arm64/boot/dts/qcom/Makefile
+++ b/arch/arm64/boot/dts/qcom/Makefile
@@ -62,6 +62,7 @@ dtb-$(CONFIG_ARCH_QCOM) += msm8916-wingtech-wt86518.dtb
dtb-$(CONFIG_ARCH_QCOM) += msm8916-wingtech-wt86528.dtb
dtb-$(CONFIG_ARCH_QCOM) += msm8916-wingtech-wt88047.dtb
dtb-$(CONFIG_ARCH_QCOM) += msm8916-yiming-uz801v3.dtb
+dtb-$(CONFIG_ARCH_QCOM) += msm8917-xiaomi-riva.dtb
dtb-$(CONFIG_ARCH_QCOM) += msm8929-wingtech-wt82918hd.dtb
dtb-$(CONFIG_ARCH_QCOM) += msm8939-huawei-kiwi.dtb
dtb-$(CONFIG_ARCH_QCOM) += msm8939-longcheer-l9100.dtb
diff --git a/arch/arm64/boot/dts/qcom/msm8917-xiaomi-riva.dts b/arch/arm64/boot/dts/qcom/msm8917-xiaomi-riva.dts
new file mode 100644
index 0000000000000000000000000000000000000000..f1d22535fedd94467ba3f0a88b2110ce5360e7e1
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/msm8917-xiaomi-riva.dts
@@ -0,0 +1,333 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (c) 2023, Barnabas Czeman
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/arm/qcom,ids.h>
+#include <dt-bindings/gpio/gpio.h>
+#include "msm8917.dtsi"
+#include "pm8937.dtsi"
+
+/delete-node/ &qseecom_mem;
+
+/ {
+ model = "Xiaomi Redmi 5A (riva)";
+ compatible = "xiaomi,riva", "qcom,msm8917";
+ chassis-type = "handset";
+
+ qcom,msm-id = <QCOM_ID_MSM8917 0>;
+ qcom,board-id = <0x1000b 2>, <0x2000b 2>;
+
+ battery: battery {
+ compatible = "simple-battery";
+ charge-full-design-microamp-hours = <3000000>;
+ energy-full-design-microwatt-hours = <11500000>;
+ constant-charge-current-max-microamp = <1000000>;
+ constant-charge-voltage-max-microvolt = <4400000>;
+ precharge-current-microamp = <256000>;
+ charge-term-current-microamp = <60000>;
+ voltage-min-design-microvolt = <3400000>;
+ };
+
+ chosen {
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ stdout-path = "framebuffer0";
+
+ framebuffer0: framebuffer@...01000 {
+ compatible = "simple-framebuffer";
+ reg = <0x0 0x90001000 0x0 (720 * 1280 * 3)>;
+ width = <720>;
+ height = <1280>;
+ stride = <(720 * 3)>;
+ format = "r8g8b8";
+
+ clocks = <&gcc GCC_MDSS_AHB_CLK>,
+ <&gcc GCC_MDSS_AXI_CLK>,
+ <&gcc GCC_MDSS_VSYNC_CLK>,
+ <&gcc GCC_MDSS_MDP_CLK>,
+ <&gcc GCC_MDSS_BYTE0_CLK>,
+ <&gcc GCC_MDSS_PCLK0_CLK>,
+ <&gcc GCC_MDSS_ESC0_CLK>;
+ power-domains = <&gcc MDSS_GDSC>;
+ };
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+
+ pinctrl-0 = <&gpio_keys_default>;
+ pinctrl-names = "default";
+
+ key-volup {
+ label = "Volume Up";
+ linux,code = <KEY_VOLUMEUP>;
+ gpios = <&tlmm 91 GPIO_ACTIVE_LOW>;
+ debounce-interval = <15>;
+ };
+ };
+
+ vph_pwr: regulator-vph-pwr {
+ compatible = "regulator-fixed";
+ regulator-name = "vph_pwr";
+ regulator-min-microvolt = <3700000>;
+ regulator-max-microvolt = <3700000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ reserved-memory {
+ qseecom_mem: qseecom@...00000 {
+ reg = <0x0 0x84a00000 0x0 0x1900000>;
+ no-map;
+ };
+
+ framebuffer_mem: memory@...01000 {
+ reg = <0x0 0x90001000 0x0 (720 * 1280 * 3)>;
+ no-map;
+ };
+ };
+};
+
+&blsp1_i2c3 {
+ status = "okay";
+
+ touchscreen@38 {
+ compatible = "edt,edt-ft5306";
+ reg = <0x38>;
+ interrupts-extended = <&tlmm 65 IRQ_TYPE_LEVEL_LOW>;
+ reset-gpios = <&tlmm 64 GPIO_ACTIVE_LOW>;
+ pinctrl-0 = <&tsp_int_rst_default>;
+ pinctrl-names = "default";
+ vcc-supply = <&pm8937_l10>;
+ iovcc-supply = <&pm8937_l5>;
+ touchscreen-size-x = <720>;
+ touchscreen-size-y = <1280>;
+ };
+};
+
+&blsp2_i2c1 {
+ status = "okay";
+
+ bq27426@55 {
+ compatible = "ti,bq27426";
+ reg = <0x55>;
+ monitored-battery = <&battery>;
+ };
+
+ bq25601@6b{
+ compatible = "ti,bq25601";
+ reg = <0x6b>;
+ interrupts-extended = <&tlmm 61 IRQ_TYPE_EDGE_FALLING>;
+ pinctrl-0 = <&bq25601_int_default>;
+ pinctrl-names = "default";
+ input-voltage-limit-microvolt = <4400000>;
+ input-current-limit-microamp = <1000000>;
+ monitored-battery = <&battery>;
+ };
+};
+
+&pm8937_resin {
+ linux,code = <KEY_VOLUMEDOWN>;
+
+ status = "okay";
+};
+
+&rpm_requests {
+ regulators-0 {
+ compatible = "qcom,rpm-pm8937-regulators";
+
+ vdd_s1-supply = <&vph_pwr>;
+ vdd_s2-supply = <&vph_pwr>;
+ vdd_s3-supply = <&vph_pwr>;
+ vdd_s4-supply = <&vph_pwr>;
+
+ vdd_l1_l19-supply = <&pm8937_s3>;
+ vdd_l2_l23-supply = <&pm8937_s3>;
+ vdd_l3-supply = <&pm8937_s3>;
+ vdd_l4_l5_l6_l7_l16-supply = <&pm8937_s4>;
+ vdd_l8_l11_l12_l17_l22-supply = <&vph_pwr>;
+ vdd_l9_l10_l13_l14_l15_l18-supply = <&vph_pwr>;
+
+ pm8937_s1: s1 {
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1225000>;
+ };
+
+ pm8937_s3: s3 {
+ regulator-min-microvolt = <1300000>;
+ regulator-max-microvolt = <1300000>;
+ };
+
+ pm8937_s4: s4 {
+ regulator-min-microvolt = <2050000>;
+ regulator-max-microvolt = <2050000>;
+ };
+
+ pm8937_l2: l2 {
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ };
+
+ pm8937_l5: l5 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ pm8937_l6: l6 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ pm8937_l7: l7 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ pm8937_l8: l8 {
+ regulator-min-microvolt = <2850000>;
+ regulator-max-microvolt = <2900000>;
+ };
+
+ pm8937_l9: l9 {
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ pm8937_l10: l10 {
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <3000000>;
+ };
+
+ pm8937_l11: l11 {
+ regulator-min-microvolt = <2950000>;
+ regulator-max-microvolt = <2950000>;
+ regulator-allow-set-load;
+ regulator-system-load = <200000>;
+ };
+
+ pm8937_l12: l12 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <2950000>;
+ };
+
+ pm8937_l13: l13 {
+ regulator-min-microvolt = <3075000>;
+ regulator-max-microvolt = <3075000>;
+ };
+
+ pm8937_l14: l14 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ pm8937_l15: l15 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ pm8937_l16: l16 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ pm8937_l17: l17 {
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2900000>;
+ };
+
+ pm8937_l19: l19 {
+ regulator-min-microvolt = <1225000>;
+ regulator-max-microvolt = <1350000>;
+ };
+
+ pm8937_l22: l22 {
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ };
+
+ pm8937_l23: l23 {
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ };
+ };
+
+};
+
+&sdhc_1 {
+ vmmc-supply = <&pm8937_l8>;
+ vqmmc-supply = <&pm8937_l5>;
+
+ status = "okay";
+};
+
+&sdhc_2 {
+ cd-gpios = <&tlmm 67 GPIO_ACTIVE_LOW>;
+ vmmc-supply = <&pm8937_l11>;
+ vqmmc-supply = <&pm8937_l12>;
+ pinctrl-0 = <&sdc2_default &sdc2_cd_default>;
+ pinctrl-1 = <&sdc2_sleep &sdc2_cd_default>;
+ pinctrl-names = "default", "sleep";
+
+ status = "okay";
+};
+
+&sleep_clk {
+ clock-frequency = <32768>;
+};
+
+&tlmm {
+ bq25601_int_default: bq25601-int-default-state {
+ pins = "gpio61";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+
+ gpio_keys_default: gpio-keys-default-state {
+ pins = "gpio91";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+
+ sdc2_cd_default: sdc2-cd-default-state {
+ pins = "gpio67";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-disable;
+ };
+
+ tsp_int_rst_default: tsp-int-rst-default-state {
+ pins = "gpio64", "gpio65";
+ function = "gpio";
+ drive-strength = <8>;
+ bias-pull-up;
+ };
+};
+
+&wcnss {
+ vddpx-supply = <&pm8937_l5>;
+
+ status = "okay";
+};
+
+&wcnss_iris {
+ compatible = "qcom,wcn3620";
+ vddxo-supply = <&pm8937_l7>;
+ vddrfa-supply = <&pm8937_l19>;
+ vddpa-supply = <&pm8937_l9>;
+ vdddig-supply = <&pm8937_l5>;
+};
+
+&wcnss_mem {
+ status = "okay";
+};
+
+&xo_board {
+ clock-frequency = <19200000>;
+};
--
2.47.1
Powered by blists - more mailing lists