[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20241216062920.7228-2-bhavin.sharma@siliconsignals.io>
Date: Mon, 16 Dec 2024 11:59:16 +0530
From: Bhavin Sharma <bhavin.sharma@...iconsignals.io>
To: sre@...nel.org
Cc: Bhavin Sharma <bhavin.sharma@...iconsignals.io>,
Hardevsinh Palaniya <hardevsinh.palaniya@...iconsignals.io>,
Krzysztof Kozlowski <krzysztof.kozlowski@...aro.org>,
Rob Herring <robh@...nel.org>,
Krzysztof Kozlowski <krzk+dt@...nel.org>,
Conor Dooley <conor+dt@...nel.org>,
linux-pm@...r.kernel.org,
devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org
Subject: [PATCH v10 1/2] dt-bindings: power: supply: Add STC3117 Fuel Gauge
The STC3117 provides a simple fuel gauge via I2C.
Add a DT schema to describe how to set it up in the device tree.
Signed-off-by: Hardevsinh Palaniya <hardevsinh.palaniya@...iconsignals.io>
Signed-off-by: Bhavin Sharma <bhavin.sharma@...iconsignals.io>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@...aro.org>
---
.../bindings/power/supply/st,stc3117.yaml | 74 +++++++++++++++++++
1 file changed, 74 insertions(+)
create mode 100644 Documentation/devicetree/bindings/power/supply/st,stc3117.yaml
diff --git a/Documentation/devicetree/bindings/power/supply/st,stc3117.yaml b/Documentation/devicetree/bindings/power/supply/st,stc3117.yaml
new file mode 100644
index 000000000000..e486131a27a9
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/supply/st,stc3117.yaml
@@ -0,0 +1,74 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/power/supply/st,stc3117.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: STMicroelectronics STC3117 Fuel Gauge Unit Power Supply
+
+maintainers:
+ - Hardevsinh Palaniya <hardevsinh.palaniya@...iconsignals.io>
+ - Bhavin Sharma <bhavin.sharma@...iconsignals.io>
+
+description: |
+ The STC3117 includes the STMicroelectronics OptimGauge algorithm.
+ It provides accurate battery state-of-charge (SOC) monitoring, tracks
+ battery parameter changes with operation conditions, temperature,
+ and aging, and allows the application to get a battery state-of-health
+ (SOH) indication.
+
+ An alarm output signals low SOC or low voltage conditions and also
+ indicates fault conditions like a missing or swapped battery.
+
+ Datasheet is available at
+ https://www.st.com/resource/en/datasheet/stc3117.pdf
+
+allOf:
+ - $ref: power-supply.yaml#
+
+properties:
+ compatible:
+ enum:
+ - st,stc3117
+
+ reg:
+ maxItems: 1
+
+ monitored-battery:
+ description: |
+ The fuel gauge uses the following battery properties:
+ - charge-full-design-microamp-hours
+ - voltage-min-design-microvolt
+ - voltage-max-design-microvolt
+
+ shunt-resistor-micro-ohms:
+ description: Current sense resistor
+
+ interrupts:
+ maxItems: 1
+
+required:
+ - compatible
+ - reg
+ - monitored-battery
+ - shunt-resistor-micro-ohms
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/irq.h>
+
+ i2c {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ battery@70 {
+ compatible = "st,stc3117";
+ reg = <0x70>;
+ interrupt-parent = <&gpio0>;
+ interrupts = <31 IRQ_TYPE_LEVEL_LOW>;
+ monitored-battery = <&bat>;
+ shunt-resistor-micro-ohms = <10000>;
+ };
+ };
--
2.34.1
Powered by blists - more mailing lists