[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20241216085410.1968634-2-andrej.picej@norik.com>
Date: Mon, 16 Dec 2024 09:54:08 +0100
From: Andrej Picej <andrej.picej@...ik.com>
To: andrzej.hajda@...el.com,
neil.armstrong@...aro.org,
rfoss@...nel.org,
Laurent.pinchart@...asonboard.com,
jonas@...boo.se,
jernej.skrabec@...il.com,
airlied@...il.com,
simona@...ll.ch,
maarten.lankhorst@...ux.intel.com,
mripard@...nel.org,
tzimmermann@...e.de,
robh@...nel.org,
krzk+dt@...nel.org,
conor+dt@...nel.org,
shawnguo@...nel.org,
s.hauer@...gutronix.de,
kernel@...gutronix.de,
festevam@...il.com,
marex@...x.de
Cc: dri-devel@...ts.freedesktop.org,
devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org,
imx@...ts.linux.dev,
linux-arm-kernel@...ts.infradead.org,
upstream@...ts.phytec.de
Subject: [PATCH v7 1/3] dt-bindings: drm/bridge: ti-sn65dsi83: Add properties for ti,lvds-vod-swing
Add properties which can be used to specify LVDS differential output
voltage. Since this also depends on near-end signal termination also
include property which sets this. LVDS differential output voltage is
specified with an array (min, max), which should match the one from
connected device.
Signed-off-by: Andrej Picej <andrej.picej@...ik.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@...aro.org>
---
Changes in v7:
- no change
Changes in v6:
- no change
Changes in v5:
- added Krzysztof's reviewed-by tag
Changes in v4:
- removed "additionalProperties: true" from the patch as it is not needed
Changes in v3:
- no change
Changes in v2:
- move LVDS port schema to a $defs and reference it from there
- properties are now defined in microvolts/ohms
- use 1 property for data-lane and 1 for clock-lane LVDS voltage swing
- add 1 property which sets LVDS near-end termination
- since major change was done change the authorship to myself
---
.../bindings/display/bridge/ti,sn65dsi83.yaml | 34 +++++++++++++++++--
1 file changed, 32 insertions(+), 2 deletions(-)
diff --git a/Documentation/devicetree/bindings/display/bridge/ti,sn65dsi83.yaml b/Documentation/devicetree/bindings/display/bridge/ti,sn65dsi83.yaml
index 48a97bb3e2e0..bad6f5c81b06 100644
--- a/Documentation/devicetree/bindings/display/bridge/ti,sn65dsi83.yaml
+++ b/Documentation/devicetree/bindings/display/bridge/ti,sn65dsi83.yaml
@@ -80,12 +80,12 @@ properties:
- const: 4
port@2:
- $ref: /schemas/graph.yaml#/properties/port
description: Video port for LVDS Channel-A output (panel or bridge).
+ $ref: '#/$defs/lvds-port'
port@3:
- $ref: /schemas/graph.yaml#/properties/port
description: Video port for LVDS Channel-B output (panel or bridge).
+ $ref: '#/$defs/lvds-port'
required:
- port@0
@@ -96,6 +96,36 @@ required:
- reg
- ports
+$defs:
+ lvds-port:
+ $ref: /schemas/graph.yaml#/$defs/port-base
+ unevaluatedProperties: false
+
+ properties:
+ endpoint:
+ $ref: /schemas/media/video-interfaces.yaml#
+ unevaluatedProperties: false
+
+ properties:
+ ti,lvds-termination-ohms:
+ description: The value of near end differential termination in ohms.
+ enum: [100, 200]
+ default: 200
+
+ ti,lvds-vod-swing-clock-microvolt:
+ description: LVDS diferential output voltage <min max> for clock
+ lanes in microvolts.
+ $ref: /schemas/types.yaml#/definitions/uint32-array
+ minItems: 2
+ maxItems: 2
+
+ ti,lvds-vod-swing-data-microvolt:
+ description: LVDS diferential output voltage <min max> for data
+ lanes in microvolts.
+ $ref: /schemas/types.yaml#/definitions/uint32-array
+ minItems: 2
+ maxItems: 2
+
allOf:
- if:
properties:
--
2.34.1
Powered by blists - more mailing lists