[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20241216-gs101-simplefb-v1-2-8ccad1830281@linaro.org>
Date: Mon, 16 Dec 2024 13:06:27 +0000
From: André Draszik <andre.draszik@...aro.org>
To: Rob Herring <robh@...nel.org>, Krzysztof Kozlowski <krzk+dt@...nel.org>,
Conor Dooley <conor+dt@...nel.org>,
Peter Griffin <peter.griffin@...aro.org>,
Tudor Ambarus <tudor.ambarus@...aro.org>,
Alim Akhtar <alim.akhtar@...sung.com>
Cc: Will McVicker <willmcvicker@...gle.com>, kernel-team@...roid.com,
devicetree@...r.kernel.org, linux-kernel@...r.kernel.org,
linux-arm-kernel@...ts.infradead.org, linux-samsung-soc@...r.kernel.org,
André Draszik <andre.draszik@...aro.org>
Subject: [PATCH 2/4] arm64: dts: exynos: gs101-oriole: configure
simple-framebuffer
The bootloader configures the display hardware for a framebuffer at the
given address, let's add a simple-framebuffer node here until we get a
proper DRM driver.
This has several benefits since it's an OLED display:
* energy consumption goes down significantly, as it changes from white
(as left by bootloader) to black (linux console), and we generally
don't run out of battery anymore when plugged into a USB port
* less of a burn-in effect I assume
* phone stays cooler due to reduced energy consumption by display
Signed-off-by: André Draszik <andre.draszik@...aro.org>
---
arch/arm64/boot/dts/exynos/google/gs101-oriole.dts | 21 +++++++++++++++++++++
1 file changed, 21 insertions(+)
diff --git a/arch/arm64/boot/dts/exynos/google/gs101-oriole.dts b/arch/arm64/boot/dts/exynos/google/gs101-oriole.dts
index e58881c61d53..4e1625e3fbb4 100644
--- a/arch/arm64/boot/dts/exynos/google/gs101-oriole.dts
+++ b/arch/arm64/boot/dts/exynos/google/gs101-oriole.dts
@@ -23,9 +23,23 @@ aliases {
};
chosen {
+ #address-cells = <2>;
+ #size-cells = <1>;
+ ranges;
+
/* Bootloader expects bootargs specified otherwise it crashes */
bootargs = "";
stdout-path = &serial_0;
+
+ /* Use display framebuffer as setup by bootloader */
+ framebuffer0: framebuffer@...00000 {
+ compatible = "simple-framebuffer";
+ reg = <0x0 0xfac00000 (1080 * 2400 * 4)>;
+ width = <1080>;
+ height = <2400>;
+ stride = <(1080 * 4)>;
+ format = "a8r8g8b8";
+ };
};
gpio-keys {
@@ -69,6 +83,13 @@ ufs_0_fixed_vcc_reg: regulator-1 {
regulator-boot-on;
enable-active-high;
};
+
+ reserved-memory {
+ cont_splash_mem: splash@...00000 {
+ reg = <0x0 0xfac00000 (1080 * 2400 * 4)>;
+ no-map;
+ };
+ };
};
&ext_24_5m {
--
2.47.1.613.gc27f4b7a9f-goog
Powered by blists - more mailing lists