| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20241216144818.25344-8-robert.budai@analog.com>
Date: Mon, 16 Dec 2024 16:48:13 +0200
From: Robert Budai <robert.budai@...log.com>
To: Lars-Peter Clausen <lars@...afoo.de>,
Michael Hennerich
<Michael.Hennerich@...log.com>,
Nuno Sa <nuno.sa@...log.com>,
Ramona
Gradinariu <ramona.gradinariu@...log.com>,
Antoniu Miclaus
<antoniu.miclaus@...log.com>,
Jonathan Cameron <jic23@...nel.org>, Rob
Herring <robh@...nel.org>,
Krzysztof Kozlowski <krzk+dt@...nel.org>,
Conor
Dooley <conor+dt@...nel.org>, Jonathan Corbet <corbet@....net>,
Shen Jianping
<Jianping.Shen@...bosch.com>,
Robert Budai <robert.budai@...log.com>,
Alex
Lanzano <lanzano.alex@...il.com>, <linux-iio@...r.kernel.org>,
<devicetree@...r.kernel.org>, <linux-kernel@...r.kernel.org>,
<linux-doc@...r.kernel.org>
CC: <robi_budai@...oo.com>
Subject: [PATCH v3 7/7] docs: iio: add documentation for adis16550 driver
Add documentation for adis16550 driver which describes the driver
device files and shows how the user may use the ABI for various
scenarios (configuration, measurement, etc.).
Co-developed-by: Antoniu Miclaus <antoniu.miclaus@...log.com>
Signed-off-by: Antoniu Miclaus <antoniu.miclaus@...log.com>
Signed-off-by: Ramona Gradinariu <ramona.gradinariu@...log.com>
Signed-off-by: Robert Budai <robert.budai@...log.com>
---
Documentation/iio/adis16550.rst | 389 ++++++++++++++++++++++++++++++++
Documentation/iio/index.rst | 1 +
2 files changed, 390 insertions(+)
create mode 100644 Documentation/iio/adis16550.rst
diff --git a/Documentation/iio/adis16550.rst b/Documentation/iio/adis16550.rst
new file mode 100644
index 000000000000..fde38060f8fe
--- /dev/null
+++ b/Documentation/iio/adis16550.rst
@@ -0,0 +1,389 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+================
+ADIS16550 driver
+================
+
+This driver supports Analog Device's IMUs on SPI bus.
+
+1. Supported devices
+====================
+
+* `ADIS16550 <https://www.analog.com/ADIS16550>`_
+
+The ADIS16550 is a complete inertial system that includes a triaxis gyroscope
+and a triaxis accelerometer. Each inertial sensor in the ADIS16550 combines
+industry leading MEMS only technology with signal conditioning that optimizes
+dynamic performance. The factory calibration characterizes each sensor for
+sensitivity, bias, and alignment. As a result, each sensor has its own dynamic
+compensation formulas that provide accurate sensor measurements.
+
+The ADIS16550 provides a simple, cost-effective method for integrating accurate,
+multiaxis inertial sensing into industrial systems, especially when compared
+with the complexity and investment associated with discrete designs. All
+necessary motion testing and calibration are part of the production process at
+the factory, greatly reducing system integration time. Tight orthogonal
+alignment simplifies inertial frame alignment in navigation systems. The serial
+peripheral interface (SPI) and register structure provide a simple interface for
+data collection and configuration control.
+
+2. Device attributes
+====================
+
+Accelerometer, gyroscope measurements are always provided. Furthermore, the
+driver offers the capability to retrieve the delta angle and the delta velocity
+measurements computed by the device.
+
+The delta angle measurements represent a calculation of angular displacement
+between each sample update, while the delta velocity measurements represent a
+calculation of linear velocity change between each sample update.
+
+Finally, temperature data are provided which show a coarse measurement of
+the temperature inside of the IMU device. This data is most useful for
+monitoring relative changes in the thermal environment.
+
+Each IIO device, has a device folder under ``/sys/bus/iio/devices/iio:deviceX``,
+where X is the IIO index of the device. Under these folders reside a set of
+device files, depending on the characteristics and features of the hardware
+device in questions. These files are consistently generalized and documented in
+the IIO ABI documentation.
+
+The following tables show the adis16550 related device files, found in the
+specific device folder path ``/sys/bus/iio/devices/iio:deviceX``.
+
++-------------------------------------------+----------------------------------------------------------+
+| 3-Axis Accelerometer related device files | Description |
++-------------------------------------------+----------------------------------------------------------+
+| in_accel_scale | Scale for the accelerometer channels. |
++-------------------------------------------+----------------------------------------------------------+
+| in_accel_filter_low_pass_3db_frequency | Bandwidth for the accelerometer channels. |
++-------------------------------------------+----------------------------------------------------------+
+| in_accel_x_calibbias | Calibration offset for the X-axis accelerometer channel. |
++-------------------------------------------+----------------------------------------------------------+
+| in_accel_x_calibscale | Calibration scale for the X-axis accelerometer channel. |
++-------------------------------------------+----------------------------------------------------------+
+| in_accel_x_raw | Raw X-axis accelerometer channel value. |
++-------------------------------------------+----------------------------------------------------------+
+| in_accel_y_calibbias | Calibration offset for the Y-axis accelerometer channel. |
++-------------------------------------------+----------------------------------------------------------+
+| in_accel_y_calibscale | Calibration scale for the Y-axis accelerometer channel. |
++-------------------------------------------+----------------------------------------------------------+
+| in_accel_y_raw | Raw Y-axis accelerometer channel value. |
++-------------------------------------------+----------------------------------------------------------+
+| in_accel_z_calibbias | Calibration offset for the Z-axis accelerometer channel. |
++-------------------------------------------+----------------------------------------------------------+
+| in_accel_z_calibscale | Calibration scale for the Z-axis accelerometer channel. |
++-------------------------------------------+----------------------------------------------------------+
+| in_accel_z_raw | Raw Z-axis accelerometer channel value. |
++-------------------------------------------+----------------------------------------------------------+
+| in_deltavelocity_scale | Scale for delta velocity channels. |
++-------------------------------------------+----------------------------------------------------------+
+| in_deltavelocity_x_raw | Raw X-axis delta velocity channel value. |
++-------------------------------------------+----------------------------------------------------------+
+| in_deltavelocity_y_raw | Raw Y-axis delta velocity channel value. |
++-------------------------------------------+----------------------------------------------------------+
+| in_deltavelocity_z_raw | Raw Z-axis delta velocity channel value. |
++-------------------------------------------+----------------------------------------------------------+
+
++--------------------------------------------+------------------------------------------------------+
+| 3-Axis Gyroscope related device files | Description |
++--------------------------------------------+------------------------------------------------------+
+| in_anglvel_scale | Scale for the gyroscope channels. |
++--------------------------------------------+------------------------------------------------------+
+| in_anglvel_filter_low_pass_3db_frequency | Scale for the gyroscope channels. |
++--------------------------------------------+------------------------------------------------------+
+| in_anglvel_x_calibbias | Calibration offset for the X-axis gyroscope channel. |
++--------------------------------------------+------------------------------------------------------+
+| in_anglvel_x_calibscale | Calibration scale for the X-axis gyroscope channel. |
++--------------------------------------------+------------------------------------------------------+
+| in_anglvel_x_raw | Raw X-axis gyroscope channel value. |
++--------------------------------------------+------------------------------------------------------+
+| in_anglvel_y_calibbias | Calibration offset for the Y-axis gyroscope channel. |
++--------------------------------------------+------------------------------------------------------+
+| in_anglvel_y_calibscale | Calibration scale for the Y-axis gyroscope channel. |
++--------------------------------------------+------------------------------------------------------+
+| in_anglvel_y_raw | Raw Y-axis gyroscope channel value. |
++--------------------------------------------+------------------------------------------------------+
+| in_anglvel_z_calibbias | Calibration offset for the Z-axis gyroscope channel. |
++--------------------------------------------+------------------------------------------------------+
+| in_anglvel_z_calibscale | Calibration scale for the Z-axis gyroscope channel. |
++--------------------------------------------+------------------------------------------------------+
+| in_anglvel_z_raw | Raw Z-axis gyroscope channel value. |
++--------------------------------------------+------------------------------------------------------+
+| in_deltaangl_scale | Scale for delta angle channels. |
++--------------------------------------------+------------------------------------------------------+
+| in_deltaangl_x_raw | Raw X-axis delta angle channel value. |
++--------------------------------------------+------------------------------------------------------+
+| in_deltaangl_y_raw | Raw Y-axis delta angle channel value. |
++--------------------------------------------+------------------------------------------------------+
+| in_deltaangl_z_raw | Raw Z-axis delta angle channel value. |
++--------------------------------------------+------------------------------------------------------+
+
++----------------------------------+-------------------------------------------+
+| Temperature sensor related files | Description |
++----------------------------------+-------------------------------------------+
+| in_temp0_raw | Raw temperature channel value. |
++----------------------------------+-------------------------------------------+
+| in_temp0_offset | Offset for the temperature sensor channel.|
++----------------------------------+-------------------------------------------+
+| in_temp0_scale | Scale for the temperature sensor channel. |
++----------------------------------+-------------------------------------------+
+
++----------------------------+--------------------------------------------------------------------------------+
+| Miscellaneous device files | Description |
++----------------------------+--------------------------------------------------------------------------------+
+| name | Name of the IIO device. |
++----------------------------+--------------------------------------------------------------------------------+
+| sampling_frequency | Currently selected sample rate. |
++----------------------------+--------------------------------------------------------------------------------+
+| write_lock_enable | Lock the device from further configuration. Only a reset will remove the lock. |
++----------------------------+--------------------------------------------------------------------------------+
+
+The following table shows the adis16550 related device debug files, found in the
+specific device debug folder path ``/sys/kernel/debug/iio/iio:deviceX``.
+
++----------------------+-------------------------------------------------------------------------+
+| Debugfs device files | Description |
++----------------------+-------------------------------------------------------------------------+
+| serial_number | The serial number of the chip in hexadecimal format. |
++----------------------+-------------------------------------------------------------------------+
+| product_id | Chip specific product id (16550). |
++----------------------+-------------------------------------------------------------------------+
+| flash_count | The number of flash writes performed on the device. |
++----------------------+-------------------------------------------------------------------------+
+| firmware_revision | String containing the firmware revision in the following format ##.##. |
++----------------------+-------------------------------------------------------------------------+
+| firmware_date | String containing the firmware date in the following format mm-dd-yyyy. |
++----------------------+-------------------------------------------------------------------------+
+
+Channels processed values
+-------------------------
+
+A channel value can be read from its _raw attribute. The value returned is the
+raw value as reported by the devices. To get the processed value of the channel,
+apply the following formula:
+
+.. code-block:: bash
+
+ processed value = (_raw + _offset) * _scale
+
+Where _offset and _scale are device attributes. If no _offset attribute is
+present, simply assume its value is 0.
+
+The adis16550 driver offers data for 5 types of channels, the table below shows
+the measurement units for the processed value, which are defined by the IIO
+framework:
+
++--------------------------------------+---------------------------+
+| Channel type | Measurement unit |
++--------------------------------------+---------------------------+
+| Acceleration on X, Y, and Z axis | Meters per Second squared |
++--------------------------------------+---------------------------+
+| Angular velocity on X, Y and Z axis | Radians per second |
++--------------------------------------+---------------------------+
+| Delta velocity on X. Y, and Z axis | Meters per Second |
++--------------------------------------+---------------------------+
+| Delta angle on X, Y, and Z axis | Radians |
++--------------------------------------+---------------------------+
+| Temperature | Millidegrees Celsius |
++--------------------------------------+---------------------------+
+
+Usage examples
+--------------
+
+Show device name:
+
+.. code-block:: bash
+
+ root:/sys/bus/iio/devices/iio:device0> cat name
+ adis16550
+
+Show accelerometer channels value:
+
+.. code-block:: bash
+
+ root:/sys/bus/iio/devices/iio:device0> cat in_accel_x_raw
+ 6903851
+ root:/sys/bus/iio/devices/iio:device0> cat in_accel_y_raw
+ 5650550
+ root:/sys/bus/iio/devices/iio:device0> cat in_accel_z_raw
+ 104873530
+ root:/sys/bus/iio/devices/iio:device0> cat in_accel_scale
+ 0.000000095
+
+- X-axis acceleration = in_accel_x_raw * in_accel_scale = 0.655865845 m/s^2
+- Y-axis acceleration = in_accel_y_raw * in_accel_scale = 0.53680225 m/s^2
+- Z-axis acceleration = in_accel_z_raw * in_accel_scale = 9.96298535 m/s^2
+
+Show gyroscope channels value:
+
+.. code-block:: bash
+
+ root:/sys/bus/iio/devices/iio:device0> cat in_anglvel_x_raw
+ 193309
+ root:/sys/bus/iio/devices/iio:device0> cat in_anglvel_y_raw
+ -763676
+ root:/sys/bus/iio/devices/iio:device0> cat in_anglvel_z_raw
+ -358108
+ root:/sys/bus/iio/devices/iio:device0> cat in_anglvel_scale
+ 0.000000003
+
+- X-axis angular velocity = in_anglvel_x_raw * in_anglvel_scale = 0.000579927 rad/s
+- Y-axis angular velocity = in_anglvel_y_raw * in_anglvel_scale = −0.002291028 rad/s
+- Z-axis angular velocity = in_anglvel_z_raw * in_anglvel_scale = −0.001074324 rad/s
+
+Set calibration offset for accelerometer channels:
+
+.. code-block:: bash
+
+ root:/sys/bus/iio/devices/iio:device0> cat in_accel_x_calibbias
+ 0
+
+ root:/sys/bus/iio/devices/iio:device0> echo 5000 > in_accel_x_calibbias
+ root:/sys/bus/iio/devices/iio:device0> cat in_accel_x_calibbias
+ 5000
+
+Set calibration offset for gyroscope channels:
+
+.. code-block:: bash
+
+ root:/sys/bus/iio/devices/iio:device0> cat in_anglvel_y_calibbias
+ 0
+
+ root:/sys/bus/iio/devices/iio:device0> echo -5000 > in_anglvel_y_calibbias
+ root:/sys/bus/iio/devices/iio:device0> cat in_anglvel_y_calibbias
+ -5000
+
+Set sampling frequency:
+
+.. code-block:: bash
+
+ root:/sys/bus/iio/devices/iio:device0> cat sampling_frequency
+ 4000.000000
+
+ root:/sys/bus/iio/devices/iio:device0> echo 1000 > sampling_frequency
+ 1000.000000
+
+Set bandwidth for accelerometer channels:
+
+.. code-block:: bash
+
+ root:/sys/bus/iio/devices/iio:device0> cat in_accel_filter_low_pass_3db_frequency
+ 0
+
+ root:/sys/bus/iio/devices/iio:device0> echo 100 > in_accel_filter_low_pass_3db_frequency
+ root:/sys/bus/iio/devices/iio:device0> cat in_accel_filter_low_pass_3db_frequency
+ 100
+
+Show serial number:
+
+.. code-block:: bash
+
+ root:/sys/kernel/debug/iio/iio:device0> cat serial_number
+ 0x000000b6
+
+Show product id:
+
+.. code-block:: bash
+
+ root:/sys/kernel/debug/iio/iio:device0> cat product_id
+ 16550
+
+Show flash count:
+
+.. code-block:: bash
+
+ root:/sys/kernel/debug/iio/iio:device0> cat flash_count
+ 13
+
+Show firmware revision:
+
+.. code-block:: bash
+
+ root:/sys/kernel/debug/iio/iio:device0> cat firmware_revision
+ 1.5
+
+Show firmware date:
+
+.. code-block:: bash
+
+ root:/sys/kernel/debug/iio/iio:device0> cat firmware_date
+ 28-04-2021
+
+3. Device buffers
+=================
+
+This driver supports IIO buffers.
+
+The device supports retrieving the raw acceleration, gyroscope, delta velocity,
+delta angle and temperature measurements using buffers.
+
+However, when retrieving acceleration or gyroscope data using buffers, delta
+readings will not be available and vice versa. This is because the device only
+allows to read either acceleration and gyroscope data or delta velocity and
+delta angle data at a time and switching between these two burst data selection
+modes is time consuming.
+
+Usage examples
+--------------
+
+Set device trigger in current_trigger, if not already set:
+
+.. code-block:: bash
+
+ root:/sys/bus/iio/devices/iio:device0> cat trigger/current_trigger
+
+ root:/sys/bus/iio/devices/iio:device0> echo adis16550-dev0 > trigger/current_trigger
+ root:/sys/bus/iio/devices/iio:device0> cat trigger/current_trigger
+ adis16550-dev0
+
+Select channels for buffer read:
+
+.. code-block:: bash
+
+ root:/sys/bus/iio/devices/iio:device0> echo 1 > scan_elements/in_deltavelocity_x_en
+ root:/sys/bus/iio/devices/iio:device0> echo 1 > scan_elements/in_deltavelocity_y_en
+ root:/sys/bus/iio/devices/iio:device0> echo 1 > scan_elements/in_deltavelocity_z_en
+ root:/sys/bus/iio/devices/iio:device0> echo 1 > scan_elements/in_temp0_en
+
+Set the number of samples to be stored in the buffer:
+
+.. code-block:: bash
+
+ root:/sys/bus/iio/devices/iio:device0> echo 10 > buffer/length
+
+Enable buffer readings:
+
+.. code-block:: bash
+
+ root:/sys/bus/iio/devices/iio:device0> echo 1 > buffer/enable
+
+Obtain buffered data:
+
+.. code-block:: bash
+
+ root:/sys/bus/iio/devices/iio:device0> hexdump -C /dev/iio\:device0
+ ...
+ 0000cdf0 00 00 0d 2f 00 00 08 43 00 00 09 09 00 00 a4 5f |.../...C......._|
+ 0000ce00 00 00 0d 2f 00 00 07 de 00 00 08 db 00 00 a4 4b |.../...........K|
+ 0000ce10 00 00 0d 2f 00 00 07 58 00 00 08 a3 00 00 a4 55 |.../...X.......U|
+ 0000ce20 00 00 0d 2f 00 00 06 d6 00 00 08 5c 00 00 a4 62 |.../.......\...b|
+ 0000ce30 00 00 0d 2f 00 00 06 45 00 00 08 37 00 00 a4 47 |.../...E...7...G|
+ 0000ce40 00 00 0d 2f 00 00 05 d4 00 00 08 30 00 00 a3 fa |.../.......0....|
+ 0000ce50 00 00 0d 2f 00 00 05 d0 00 00 08 12 00 00 a3 d3 |.../............|
+ 0000ce60 00 00 0d 2f 00 00 05 dd 00 00 08 2e 00 00 a3 e9 |.../............|
+ 0000ce70 00 00 0d 2f 00 00 05 cc 00 00 08 51 00 00 a3 d5 |.../.......Q....|
+ 0000ce80 00 00 0d 2f 00 00 05 ba 00 00 08 22 00 00 a3 9a |.../......."....|
+ 0000ce90 00 00 0d 2f 00 00 05 9c 00 00 07 d9 00 00 a3 40 |.../...........@|
+ 0000cea0 00 00 0d 2f 00 00 05 68 00 00 07 94 00 00 a2 e4 |.../...h........|
+ 0000ceb0 00 00 0d 2f 00 00 05 25 00 00 07 8d 00 00 a2 ce |.../...%........|
+ ...
+
+See ``Documentation/iio/iio_devbuf.rst`` for more information about how buffered
+data is structured.
+
+4. IIO Interfacing Tools
+========================
+
+See ``Documentation/iio/iio_tools.rst`` for the description of the available IIO
+interfacing tools.
diff --git a/Documentation/iio/index.rst b/Documentation/iio/index.rst
index 074dbbf7ba0a..2c3fa1716a69 100644
--- a/Documentation/iio/index.rst
+++ b/Documentation/iio/index.rst
@@ -26,6 +26,7 @@ Industrial I/O Kernel Drivers
ad7944
adis16475
adis16480
+ adis16550
adxl380
bno055
ep93xx_adc
--
2.34.1
Powered by blists - more mailing lists