lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20241217154345.276919-5-angelogioacchino.delregno@collabora.com>
Date: Tue, 17 Dec 2024 16:43:16 +0100
From: AngeloGioacchino Del Regno <angelogioacchino.delregno@...labora.com>
To: chunkuang.hu@...nel.org
Cc: p.zabel@...gutronix.de,
	airlied@...il.com,
	simona@...ll.ch,
	maarten.lankhorst@...ux.intel.com,
	mripard@...nel.org,
	tzimmermann@...e.de,
	robh@...nel.org,
	krzk+dt@...nel.org,
	conor+dt@...nel.org,
	matthias.bgg@...il.com,
	angelogioacchino.delregno@...labora.com,
	ck.hu@...iatek.com,
	jitao.shi@...iatek.com,
	jie.qiu@...iatek.com,
	junzhi.zhao@...iatek.com,
	dri-devel@...ts.freedesktop.org,
	linux-mediatek@...ts.infradead.org,
	devicetree@...r.kernel.org,
	linux-kernel@...r.kernel.org,
	linux-arm-kernel@...ts.infradead.org,
	kernel@...labora.com,
	dmitry.baryshkov@...aro.org
Subject: [PATCH v3 04/33] drm/mediatek: mtk_dpi: Move pixel clock setting flow to function

In preparation for adding support for the DPI IP found in MT8195
and in MT8188 used for HDMI, move the code flow for calculation
and setting of the DPI pixel clock to a separate function called
mtk_dpi_set_pixel_clk().

This was done because, on those platforms, the DPI instance that
is used for HDMI will get its pixel clock from the HDMI clock,
hence it is not necessary, nor desirable, to calculate or set
the pixel clock in DPI.

Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@...labora.com>
---
 drivers/gpu/drm/mediatek/mtk_dpi.c | 43 +++++++++++++++++-------------
 1 file changed, 24 insertions(+), 19 deletions(-)

diff --git a/drivers/gpu/drm/mediatek/mtk_dpi.c b/drivers/gpu/drm/mediatek/mtk_dpi.c
index 3bdce932f910..f931baf9c3fa 100644
--- a/drivers/gpu/drm/mediatek/mtk_dpi.c
+++ b/drivers/gpu/drm/mediatek/mtk_dpi.c
@@ -536,26 +536,17 @@ static unsigned int mtk_dpi_calculate_factor(struct mtk_dpi *dpi, int mode_clk)
 	return dpi_factor[dpi->conf->num_dpi_factor - 1].factor;
 }
 
-static int mtk_dpi_set_display_mode(struct mtk_dpi *dpi,
-				    struct drm_display_mode *mode)
+static void mtk_dpi_set_pixel_clk(struct mtk_dpi *dpi, struct videomode *vm, int mode_clk)
 {
-	struct mtk_dpi_polarities dpi_pol;
-	struct mtk_dpi_sync_param hsync;
-	struct mtk_dpi_sync_param vsync_lodd = { 0 };
-	struct mtk_dpi_sync_param vsync_leven = { 0 };
-	struct mtk_dpi_sync_param vsync_rodd = { 0 };
-	struct mtk_dpi_sync_param vsync_reven = { 0 };
-	struct videomode vm = { 0 };
 	unsigned long pll_rate;
 	unsigned int factor;
 
 	/* let pll_rate can fix the valid range of tvdpll (1G~2GHz) */
 	factor = mtk_dpi_calculate_factor(dpi, mode_clk);
-	drm_display_mode_to_videomode(mode, &vm);
-	pll_rate = vm.pixelclock * factor;
+	pll_rate = vm->pixelclock * factor;
 
 	dev_dbg(dpi->dev, "Want PLL %lu Hz, pixel clock %lu Hz\n",
-		pll_rate, vm.pixelclock);
+		pll_rate, vm->pixelclock);
 
 	clk_set_rate(dpi->tvd_clk, pll_rate);
 	pll_rate = clk_get_rate(dpi->tvd_clk);
@@ -565,20 +556,34 @@ static int mtk_dpi_set_display_mode(struct mtk_dpi *dpi,
 	 * pixels for each iteration: divide the clock by this number and
 	 * adjust the display porches accordingly.
 	 */
-	vm.pixelclock = pll_rate / factor;
-	vm.pixelclock /= dpi->conf->pixels_per_iter;
+	vm->pixelclock = pll_rate / factor;
+	vm->pixelclock /= dpi->conf->pixels_per_iter;
 
 	if ((dpi->output_fmt == MEDIA_BUS_FMT_RGB888_2X12_LE) ||
 	    (dpi->output_fmt == MEDIA_BUS_FMT_RGB888_2X12_BE))
-		clk_set_rate(dpi->pixel_clk, vm.pixelclock * 2);
+		clk_set_rate(dpi->pixel_clk, vm->pixelclock * 2);
 	else
-		clk_set_rate(dpi->pixel_clk, vm.pixelclock);
+		clk_set_rate(dpi->pixel_clk, vm->pixelclock);
 
-
-	vm.pixelclock = clk_get_rate(dpi->pixel_clk);
+	vm->pixelclock = clk_get_rate(dpi->pixel_clk);
 
 	dev_dbg(dpi->dev, "Got  PLL %lu Hz, pixel clock %lu Hz\n",
-		pll_rate, vm.pixelclock);
+		pll_rate, vm->pixelclock);
+}
+
+static int mtk_dpi_set_display_mode(struct mtk_dpi *dpi,
+				    struct drm_display_mode *mode)
+{
+	struct mtk_dpi_polarities dpi_pol;
+	struct mtk_dpi_sync_param hsync;
+	struct mtk_dpi_sync_param vsync_lodd = { 0 };
+	struct mtk_dpi_sync_param vsync_leven = { 0 };
+	struct mtk_dpi_sync_param vsync_rodd = { 0 };
+	struct mtk_dpi_sync_param vsync_reven = { 0 };
+	struct videomode vm = { 0 };
+
+	drm_display_mode_to_videomode(mode, &vm);
+	mtk_dpi_set_pixel_clk(dpi, &vm, mode->clock);
 
 	dpi_pol.ck_pol = MTK_DPI_POLARITY_FALLING;
 	dpi_pol.de_pol = MTK_DPI_POLARITY_RISING;
-- 
2.47.0


Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ