Message-ID: 
 <TY3PR01MB9982FE7739FABB2275C79C0B923B2@TY3PR01MB9982.jpnprd01.prod.outlook.com>
Date: Mon, 16 Dec 2024 23:57:49 +0000
From: <yuji2.ishikawa@...hiba.co.jp>
To: <krzk@...nel.org>, <laurent.pinchart@...asonboard.com>,
        <mchehab@...nel.org>, <robh@...nel.org>, <krzk+dt@...nel.org>,
        <conor+dt@...nel.org>, <sakari.ailus@...ux.intel.com>,
        <hverkuil-cisco@...all.nl>, <nobuhiro1.iwamatsu@...hiba.co.jp>
CC: <linux-media@...r.kernel.org>, <linux-kernel@...r.kernel.org>,
        <linux-arm-kernel@...ts.infradead.org>, <devicetree@...r.kernel.org>
Subject: RE: [PATCH v12 1/8] dt-bindings: media: platform: visconti: Add
 Toshiba Visconti MIPI CSI-2 Receiver

Hello Krzysztof

Thank you for your review

> -----Original Message-----
> From: Krzysztof Kozlowski <krzk@...nel.org>
> Sent: Monday, November 25, 2024 7:11 PM
> To: ishikawa yuji(石川 悠司 ○ＲＤＣ□ＡＩＴＣ○ＥＡ開)
> <yuji2.ishikawa@...hiba.co.jp>; Laurent Pinchart
> <laurent.pinchart@...asonboard.com>; Mauro Carvalho Chehab
> <mchehab@...nel.org>; Rob Herring <robh@...nel.org>; Krzysztof Kozlowski
> <krzk+dt@...nel.org>; Conor Dooley <conor+dt@...nel.org>; Sakari Ailus
> <sakari.ailus@...ux.intel.com>; Hans Verkuil <hverkuil-cisco@...all.nl>;
> iwamatsu nobuhiro(岩松 信洋 ○ＤＩＴＣ□ＤＩＴ○ＯＳＴ)
> <nobuhiro1.iwamatsu@...hiba.co.jp>
> Cc: linux-media@...r.kernel.org; linux-kernel@...r.kernel.org;
> linux-arm-kernel@...ts.infradead.org; devicetree@...r.kernel.org
> Subject: Re: [PATCH v12 1/8] dt-bindings: media: platform: visconti: Add
> Toshiba Visconti MIPI CSI-2 Receiver
> 
> On 25/11/2024 10:21, Yuji Ishikawa wrote:
> > Adds the Device Tree binding documentation that allows to describe the
> > MIPI CSI-2 Receiver found in Toshiba Visconti SoCs.
> >
> > Signed-off-by: Yuji Ishikawa <yuji2.ishikawa@...hiba.co.jp>
> > Reviewed-by: Nobuhiro Iwamatsu <nobuhiro1.iwamatsu@...hiba.co.jp>
> 
> 
> How newly added patch can have already Rb tag? Was this review really, really
> performed internally or you just satisfy some internal managers requirements
> and fake the stats?
> 

I added this Reviewed-by tag because the patch was reviewed internally.

> > ---
> >
> > Changelog v12:
> > - Newly add bindings for CSI2RX driver
> >
> >  .../media/toshiba,visconti5-csi2rx.yaml       | 104
> ++++++++++++++++++
> >  1 file changed, 104 insertions(+)
> >  create mode 100644
> > Documentation/devicetree/bindings/media/toshiba,visconti5-csi2rx.yaml
> >
> > diff --git
> > a/Documentation/devicetree/bindings/media/toshiba,visconti5-csi2rx.yam
> > l
> > b/Documentation/devicetree/bindings/media/toshiba,visconti5-csi2rx.yam
> > l
> > new file mode 100644
> > index 000000000000..5488072bc82a
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/media/toshiba,visconti5-csi2rx
> > +++ .yaml
> > @@ -0,0 +1,104 @@
> > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) %YAML 1.2
> > +---
> > +$id:
> > +http://devicetree.org/schemas/media/toshiba,visconti5-csi2rx.yaml#
> > +$schema: http://devicetree.org/meta-schemas/core.yaml#
> > +
> > +title: Toshiba Visconti5 SoC MIPI CSI-2 receiver
> > +
> > +maintainers:
> > +  - Nobuhiro Iwamatsu <nobuhiro1.iwamatsu@...hiba.co.jp>
> > +
> > +description: |-
> 
> Drop |-
> 

I'll drop "|-"

> > +  Toshiba Visconti5 SoC MIPI CSI-2 receiver device receives MIPI
> > + CSI-2 video  stream. Use with VIIF device. T.B.D
> > +
> > +properties:
> > +  compatible:
> > +    const: toshiba,visconti5-csi2rx
> 
> Why this is called "RX"? Can you have a TX? I had impression that one cannot.
> 

VIIF has only MIPI CSI2 receiver (CSI2RX). There's no TX for it.
Visconti also has VOIF (Video Output Interface) hardware which has MIPI CSI2 (not DSI) transmitter (CSI2TX).

> > +
> > +  reg:
> > +    items:
> > +      - description: Registers for CSI2 receiver control
> > +
> > +  interrupts:
> > +    items:
> > +      - description: CSI2 Receiver Interrupt
> > +
> > +  ports:
> > +    $ref: /schemas/graph.yaml#/properties/ports
> > +
> > +    properties:
> > +      port@0:
> > +        $ref: /schemas/graph.yaml#/$defs/port-base
> > +        unevaluatedProperties: false
> > +        description:
> > +          Input port node, single endpoint describing the CSI-2
> transmitter.
> > +
> > +        properties:
> > +          endpoint:
> > +            $ref: video-interfaces.yaml#
> > +            unevaluatedProperties: false
> > +
> > +            properties:
> > +              data-lanes:
> > +                description: CSI2 receiver supports 1, 2, 3 or 4 data lanes
> > +                minItems: 1
> > +                items:
> > +                  - const: 1
> > +                  - const: 2
> > +                  - const: 3
> > +                  - const: 4
> > +            required:
> > +              - data-lanes
> > +
> > +      port@1:
> > +        $ref: /schemas/graph.yaml#/properties/port
> > +        description:
> > +          Output port node, single endpoint describing the Visconti VIIF.
> > +
> > +    required:
> > +      - port@0
> > +      - port@1
> > +
> > +required:
> > +  - compatible
> > +  - reg
> > +  - interrupts
> > +  - ports
> > +
> > +additionalProperties: false
> > +
> > +examples:
> > +  - |
> > +    #include <dt-bindings/interrupt-controller/arm-gic.h>
> > +    #include <dt-bindings/interrupt-controller/irq.h>
> > +
> > +    soc {
> > +        #address-cells = <2>;
> > +        #size-cells = <2>;
> > +
> > +        csi2rx@...08000 {
> 
> 
> csi@
> 
> Node names should be generic. See also an explanation and list of examples
> (not exhaustive) in DT specification:
> https://devicetree-specification.readthedocs.io/en/latest/chapter2-devicetre
> e-basics.html#generic-names-recommendation
> 

I'll fix the node names.

> 
> Best regards,
> Krzysztof


Best regards,
Yuji Ishikawa

Powered by blists - more mailing lists