[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20241217-add-venus-for-qcs615-v5-2-747395d9e630@quicinc.com>
Date: Tue, 17 Dec 2024 14:47:38 +0530
From: Renjiang Han <quic_renjiang@...cinc.com>
To: Stanimir Varbanov <stanimir.k.varbanov@...il.com>,
Vikash Garodia
<quic_vgarodia@...cinc.com>,
Bryan O'Donoghue <bryan.odonoghue@...aro.org>,
Mauro Carvalho Chehab <mchehab@...nel.org>,
Rob Herring <robh@...nel.org>,
Krzysztof Kozlowski <krzk+dt@...nel.org>,
Conor Dooley <conor+dt@...nel.org>,
Bjorn Andersson <andersson@...nel.org>,
Konrad Dybcio
<konradybcio@...nel.org>
CC: <linux-media@...r.kernel.org>, <linux-arm-msm@...r.kernel.org>,
<devicetree@...r.kernel.org>, <linux-kernel@...r.kernel.org>,
"Stanimir
Varbanov" <stanimir.varbanov@...aro.org>,
Renjiang Han
<quic_renjiang@...cinc.com>
Subject: [PATCH v5 2/4] media: venus: core: use opp-table for the frequency
Get frequency value from the opp-table of devicetree for the v4 core.
For compatibility, if getting data from the opp table fails, the data
in the frequency table will be used.
Signed-off-by: Renjiang Han <quic_renjiang@...cinc.com>
---
drivers/media/platform/qcom/venus/pm_helpers.c | 53 +++++++++++++++++++-------
1 file changed, 39 insertions(+), 14 deletions(-)
diff --git a/drivers/media/platform/qcom/venus/pm_helpers.c b/drivers/media/platform/qcom/venus/pm_helpers.c
index 33a5a659c0ada0ca97eebb5522c5f349f95c49c7..b61c0ad152878870b7223efa274e137d3636433b 100644
--- a/drivers/media/platform/qcom/venus/pm_helpers.c
+++ b/drivers/media/platform/qcom/venus/pm_helpers.c
@@ -43,14 +43,20 @@ static int core_clks_enable(struct venus_core *core)
const struct venus_resources *res = core->res;
const struct freq_tbl *freq_tbl = core->res->freq_tbl;
unsigned int freq_tbl_size = core->res->freq_tbl_size;
+ struct device *dev = core->dev;
+ struct dev_pm_opp *opp;
unsigned long freq;
unsigned int i;
int ret;
- if (!freq_tbl)
- return -EINVAL;
-
- freq = freq_tbl[freq_tbl_size - 1].freq;
+ opp = dev_pm_opp_find_freq_ceil(dev, &freq);
+ if (IS_ERR(opp)) {
+ if (!freq_tbl)
+ return -EINVAL;
+ freq = freq_tbl[freq_tbl_size - 1].freq;
+ } else {
+ dev_pm_opp_put(opp);
+ }
for (i = 0; i < res->clks_num; i++) {
if (IS_V6(core)) {
@@ -627,12 +633,15 @@ min_loaded_core(struct venus_inst *inst, u32 *min_coreid, u32 *min_load, bool lo
static int decide_core(struct venus_inst *inst)
{
+ const struct freq_tbl *freq_tbl = inst->core->res->freq_tbl;
const u32 ptype = HFI_PROPERTY_CONFIG_VIDEOCORES_USAGE;
struct venus_core *core = inst->core;
u32 min_coreid, min_load, cur_inst_load;
u32 min_lp_coreid, min_lp_load, cur_inst_lp_load;
struct hfi_videocores_usage_type cu;
- unsigned long max_freq;
+ unsigned long max_freq = ULONG_MAX;
+ struct device *dev = core->dev;
+ struct dev_pm_opp *opp;
int ret = 0;
if (legacy_binding) {
@@ -655,7 +664,11 @@ static int decide_core(struct venus_inst *inst)
cur_inst_lp_load *= inst->clk_data.low_power_freq;
/*TODO : divide this inst->load by work_route */
- max_freq = core->res->freq_tbl[0].freq;
+ opp = dev_pm_opp_find_freq_floor(dev, &max_freq);
+ if (IS_ERR(opp))
+ max_freq = freq_tbl[0].freq;
+ else
+ dev_pm_opp_put(opp);
min_loaded_core(inst, &min_coreid, &min_load, false);
min_loaded_core(inst, &min_lp_coreid, &min_lp_load, true);
@@ -1078,7 +1091,9 @@ static int load_scale_v4(struct venus_inst *inst)
unsigned int num_rows = core->res->freq_tbl_size;
struct device *dev = core->dev;
unsigned long freq = 0, freq_core1 = 0, freq_core2 = 0;
+ unsigned long max_freq = ULONG_MAX;
unsigned long filled_len = 0;
+ struct dev_pm_opp *opp;
int i, ret = 0;
for (i = 0; i < inst->num_input_bufs; i++)
@@ -1104,19 +1119,29 @@ static int load_scale_v4(struct venus_inst *inst)
freq = max(freq_core1, freq_core2);
- if (freq > table[0].freq) {
- dev_dbg(dev, VDBGL "requested clock rate: %lu scaling clock rate : %lu\n",
- freq, table[0].freq);
+ opp = dev_pm_opp_find_freq_floor(dev, &max_freq);
+ if (IS_ERR(opp))
+ max_freq = table[0].freq;
+ else
+ dev_pm_opp_put(opp);
- freq = table[0].freq;
+ if (freq > max_freq) {
+ dev_dbg(dev, VDBGL "requested clock rate: %lu scaling clock rate : %lu\n",
+ freq, max_freq);
+ freq = max_freq;
goto set_freq;
}
- for (i = num_rows - 1 ; i >= 0; i--) {
- if (freq <= table[i].freq) {
- freq = table[i].freq;
- break;
+ opp = dev_pm_opp_find_freq_ceil(dev, &freq);
+ if (IS_ERR(opp)) {
+ for (i = num_rows - 1 ; i >= 0; i--) {
+ if (freq <= table[i].freq) {
+ freq = table[i].freq;
+ break;
+ }
}
+ } else {
+ dev_pm_opp_put(opp);
}
set_freq:
--
2.34.1
Powered by blists - more mailing lists