[<prev] [next>] [<thread-prev] [day] [month] [year] [list]
Message-ID: <rdwtgcpvchdejucyraohjm52sqyhqm23sec6omkbys6wrxaslv@tspjghkgsx2m>
Date: Wed, 18 Dec 2024 15:53:00 +0800
From: "Chia-Lin Kao (AceLan)" <acelan.kao@...onical.com>
To: En-Wei Wu <en-wei.wu@...onical.com>
Cc: anthony.l.nguyen@...el.com, przemyslaw.kitszel@...el.com,
andrew+netdev@...n.ch, davem@...emloft.net, edumazet@...gle.com, kuba@...nel.org,
pabeni@...hat.com, intel-wired-lan@...ts.osuosl.org, netdev@...r.kernel.org,
linux-kernel@...r.kernel.org, vitaly.lifshits@...el.com
Subject: Re: [PATCH iwl-net v2] igc: return early when failing to read EECD
register
On Wed, Dec 18, 2024 at 10:37:42AM +0800, En-Wei Wu wrote:
> When booting with a dock connected, the igc driver may get stuck for ~40
> seconds if PCIe link is lost during initialization.
>
> This happens because the driver access device after EECD register reads
> return all F's, indicating failed reads. Consequently, hw->hw_addr is set
> to NULL, which impacts subsequent rd32() reads. This leads to the driver
> hanging in igc_get_hw_semaphore_i225(), as the invalid hw->hw_addr
> prevents retrieving the expected value.
>
> To address this, a validation check and a corresponding return value
> catch is added for the EECD register read result. If all F's are
> returned, indicating PCIe link loss, the driver will return -ENXIO
> immediately. This avoids the 40-second hang and significantly improves
> boot time when using a dock with an igc NIC.
>
> Log before the patch:
> [ 0.911913] igc 0000:70:00.0: enabling device (0000 -> 0002)
> [ 0.912386] igc 0000:70:00.0: PTM enabled, 4ns granularity
> [ 1.571098] igc 0000:70:00.0 (unnamed net_device) (uninitialized): PCIe link lost, device now detached
> [ 43.449095] igc_get_hw_semaphore_i225: igc 0000:70:00.0 (unnamed net_device) (uninitialized): Driver can't access device - SMBI bit is set.
> [ 43.449186] igc 0000:70:00.0: probe with driver igc failed with error -13
> [ 46.345701] igc 0000:70:00.0: enabling device (0000 -> 0002)
> [ 46.345777] igc 0000:70:00.0: PTM enabled, 4ns granularity
>
> Log after the patch:
> [ 1.031000] igc 0000:70:00.0: enabling device (0000 -> 0002)
> [ 1.032097] igc 0000:70:00.0: PTM enabled, 4ns granularity
> [ 1.642291] igc 0000:70:00.0 (unnamed net_device) (uninitialized): PCIe link lost, device now detached
> [ 5.480490] igc 0000:70:00.0: enabling device (0000 -> 0002)
> [ 5.480516] igc 0000:70:00.0: PTM enabled, 4ns granularity
Thank En-Wei, this is a good fix.
>
> Fixes: ab4056126813 ("igc: Add NVM support")
> Cc: Chia-Lin Kao (AceLan) <acelan.kao@...onical.com>
> Signed-off-by: En-Wei Wu <en-wei.wu@...onical.com>
> ---
> Changes in v2:
> - Added "after" logs showing improved boot time
> - Fixed error code (use -ENXIO instead of -ENODEV)
> - Added error propagation in igc_get_invariants_base()
> - Added Fixes tag
> - Added [PATCH iwl-net] prefix
> - Changed original author from AceLan to En-Wei
>
> drivers/net/ethernet/intel/igc/igc_base.c | 6 ++++++
> 1 file changed, 6 insertions(+)
>
> diff --git a/drivers/net/ethernet/intel/igc/igc_base.c b/drivers/net/ethernet/intel/igc/igc_base.c
> index 9fae8bdec2a7..1613b562d17c 100644
> --- a/drivers/net/ethernet/intel/igc/igc_base.c
> +++ b/drivers/net/ethernet/intel/igc/igc_base.c
> @@ -68,6 +68,10 @@ static s32 igc_init_nvm_params_base(struct igc_hw *hw)
> u32 eecd = rd32(IGC_EECD);
> u16 size;
>
> + /* failed to read reg and got all F's */
> + if (!(~eecd))
> + return -ENXIO;
> +
> size = FIELD_GET(IGC_EECD_SIZE_EX_MASK, eecd);
>
> /* Added to a constant, "size" becomes the left-shift value
> @@ -221,6 +225,8 @@ static s32 igc_get_invariants_base(struct igc_hw *hw)
>
> /* NVM initialization */
> ret_val = igc_init_nvm_params_base(hw);
> + if (ret_val)
> + goto out;
> switch (hw->mac.type) {
> case igc_i225:
> ret_val = igc_init_nvm_params_i225(hw);
> --
> 2.43.0
>
Powered by blists - more mailing lists