Message-Id: <20241218-dt-bcm2712-fixes-v4-0-54cc88b6c229@raspberrypi.com>
Date: Wed, 18 Dec 2024 14:48:31 +0000
From: Dave Stevenson <dave.stevenson@...pberrypi.com>
To: Maarten Lankhorst <maarten.lankhorst@...ux.intel.com>, 
 Maxime Ripard <mripard@...nel.org>, Thomas Zimmermann <tzimmermann@...e.de>, 
 David Airlie <airlied@...il.com>, Simona Vetter <simona@...ll.ch>, 
 Rob Herring <robh@...nel.org>, Krzysztof Kozlowski <krzk+dt@...nel.org>, 
 Conor Dooley <conor+dt@...nel.org>, 
 Florian Fainelli <florian.fainelli@...adcom.com>, 
 Broadcom internal kernel review list <bcm-kernel-feedback-list@...adcom.com>, 
 Eric Anholt <eric@...olt.net>, 
 Maíra Canal <mcanal@...lia.com>, 
 Raspberry Pi Kernel Maintenance <kernel-list@...pberrypi.com>, 
 Ray Jui <rjui@...adcom.com>, Scott Branden <sbranden@...adcom.com>, 
 Doug Berger <opendmb@...il.com>, Linus Walleij <linus.walleij@...aro.org>, 
 Bartosz Golaszewski <brgl@...ev.pl>, Thomas Gleixner <tglx@...utronix.de>, 
 Stefan Wahren <wahrenst@....net>
Cc: dri-devel@...ts.freedesktop.org, devicetree@...r.kernel.org, 
 linux-rpi-kernel@...ts.infradead.org, linux-arm-kernel@...ts.infradead.org, 
 linux-kernel@...r.kernel.org, Florian Fainelli <f.fainelli@...il.com>, 
 linux-gpio@...r.kernel.org, Dave Stevenson <dave.stevenson@...pberrypi.com>, 
 Krzysztof Kozlowski <krzysztof.kozlowski@...aro.org>
Subject: [PATCH v4 0/3] drm/vc4: Fixup DT and DT binding issues from recent
 patchset

I missed the DT errors from the recent patchset[1] (DT patches
in linux-next via Florian, DRM bindings patches on dri-misc-next)
as Rob's bot report got spam filtered, so this is a fixup set.

Largely it was changes to number of interrupts or clocks in the
bindings, so those are now covered.

I've fixed up the missing "interrupt-controller" flags for 2711
and 2712 whilst here.

I can't get my head around what is meant to happen with ranges:
"soc@...c000000: firmware: 'ranges' is a required property"
The meaning seems obvious.

However if I add it then I get:
"firmware: '#address-cells', '#size-cells', 'dma-ranges', 'ranges' do
not match any of the regexes: 'pinctrl-[0-9]+'
from schema $id: http://devicetree.org/schemas/arm/bcm/raspberrypi,bcm2835-firmware.yaml#

There's obviously some other flag I need to set in the bindings,
but I can't work it out. We have similar errors for all the Pi
platforms for one or more nodes.
Please advise and I'll happily fix them all.

Thanks
  Dave

[1] https://lore.kernel.org/linux-arm-kernel/20241025-drm-vc4-2712-support-v2-0-35efa83c8fc0@raspberrypi.com/

Signed-off-by: Dave Stevenson <dave.stevenson@...pberrypi.com>
---
Changes in v4:
- 1/7 Removed the duplication
- 2/7 Added "minItems: 2" and added to the commit text that the clock
  and interrupt names are required for bcm2712
- 3/7 Already applied by Bartosz, and 5-7/7 applied by Florian
- 4/7 added Krzysztof Acked-by
- Link to v3: https://lore.kernel.org/r/20241212-dt-bcm2712-fixes-v3-0-44a7f3390331@raspberrypi.com

Thanks Krzysztof for your comments. Terms such as "widest constraints"
may be obvious to those regularly doing dtschemas, but not to me who
does them once in a blue-moon.

Changes in v3:
- Fixed up indentation on 1/7. (I fixed it once, but obviously reworked
  things and lost it).
- Link to v2: https://lore.kernel.org/r/20241212-dt-bcm2712-fixes-v2-0-35986e04d0f4@raspberrypi.com

Thanks to Stefan and Krzysztof for their reviews.
Hopefully I've addressed all points raised in the correct manner.

Changes in v2:
- Commits have now be merged from drm-misc-next to linux-next, so all
  commit hashes are valid on linux-next.
- 1/7 Removed references to "previous commit". Fixed up indentation.
  Added maxItems
- 2/7 Defined widest constraints
- 3/7 Added maxItems and removed reference to Linux
- 4/7 Described the errors. Split into two for fix of node name vs addr
  being wrong.
- Added new patch removing "required" for interrupt-controller and
  interrupt-cells for bcm2836-l1-intc
- 5/7 (now 7/7) Removed the intc node for 2712 - it's irrelevant on 64bit systems
- 6/7 dropped as updating the binding is the correct answer
- 7/7 dropped. simple-bus claims ranges is required, but adding it
  creates other errors. I'm unclear as to the right solution.

- Link to v1: https://lore.kernel.org/r/20241202-dt-bcm2712-fixes-v1-0-fac67cc2f98a@raspberrypi.com

---
Dave Stevenson (3):
      dt-bindings: display: bcm2711-hdmi: Add interrupt details for BCM2712
      dt-bindings: display: Fix BCM2835 HVS bindings for BCM2712
      dt-bindings: interrupt-controller: brcm,bcm2836-l1-intc: Drop interrupt-controller requirement

 .../bindings/display/brcm,bcm2711-hdmi.yaml        | 81 +++++++++++++++++----
 .../bindings/display/brcm,bcm2835-hvs.yaml         | 84 ++++++++++++++++++----
 .../interrupt-controller/brcm,bcm2836-l1-intc.yaml |  2 -
 3 files changed, 137 insertions(+), 30 deletions(-)
---
base-commit: 29978a81e62128d2cee56f066ec92de584f4ab5f
change-id: 20241128-dt-bcm2712-fixes-afb0e8a0a476

Best regards,
-- 
Dave Stevenson <dave.stevenson@...pberrypi.com>

Powered by blists - more mailing lists