[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-Id: <20241219-eblanc-ad4630_v1-v2-0-f36e55907bf5@baylibre.com>
Date: Thu, 19 Dec 2024 17:10:35 +0100
From: Esteban Blanc <eblanc@...libre.com>
To: Lars-Peter Clausen <lars@...afoo.de>,
Michael Hennerich <Michael.Hennerich@...log.com>,
Nuno Sá <nuno.sa@...log.com>,
Jonathan Cameron <jic23@...nel.org>, Rob Herring <robh@...nel.org>,
Krzysztof Kozlowski <krzk+dt@...nel.org>,
Conor Dooley <conor+dt@...nel.org>, Jonathan Corbet <corbet@....net>
Cc: Michael Hennerich <michael.hennerich@...log.com>,
linux-iio@...r.kernel.org, devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org, linux-doc@...r.kernel.org,
Esteban Blanc <eblanc@...libre.com>,
Conor Dooley <conor.dooley@...rochip.com>
Subject: [PATCH v2 0/6] iio: adc: ad4030: new driver for AD4030 and similar
ADCs
This is adding DT bindings and a new driver for AD4030, AD4630 and
AD4632 ADCs.
This work is being done in collaboration with Analog Devices Inc.,
hence they are listed as maintainers rather than me.
The code has been tested on a Zedboard with an EVAL-AD4030-24FMCZ,
an EVAL-AD4630-24FMCZ and an EVAL-AD4630-16FMCZ. As there is no eval
board for AD4632 the support can't be tested at the moment. The main
difference is the reduced throughput.
Signed-off-by: Esteban Blanc <eblanc@...libre.com>
---
Changes since RFC:
- Reorder IIO channels to have the common byte channel next to its differential
channel.
- Extended names for IIO channels.
- Diffrential data channels are marked as differential channels on IIO
side.
- Use get/put_unaligned_be24 for offset and sign extend it.
- Common byte channel now has 32 realbits. This will be the same as what the
FPGA will return, avoiding different channel layouts.
- Fix missing newline in some error messages.
- Add comment for the use of spi_sync_transfer instead of
spi_write_then_read in ad4030_spi_read.
- Use DMA safe buffers for regmap operations.
- Clarify calculation for number of bytes to read from the device during
conversion.
- Formating fixes.
- Add documentation page.
- Link to RFC: https://lore.kernel.org/r/20240627-eblanc-ad4630_v1-v1-0-fdc0610c23b0@baylibre.com
Changes since V1:
The most important change is the use of the RFC's IIO channel layout as it's
the most space efficient compared to the V1. In the event of a future DMA
enabled version using the ADI's SPI Engine, the IIO channel layout would be
different anyway. The V1 layout had a more logical ordering of the IIO
channels but since we are using labels in this version, there is no reason
to keep it.
- Use REGMAP instead of REGMAP_SPI in Kconfig
- Select IIO_TRIGGERED_BUFFER in Kconfig
- Use layout with the differential channels first then the common byte channels.
- Flatten rx_data union/struct layout
- Use get/put_unaligned_beXX
- Scale read is done without requiring direct mode
- Grade check is just a warning now
- Use label instead of extend names
- Use IIO_VAL_INT_PLUS_NANO for gain values
- Discard out of bounds values when setting oversampling ratio
- Merge AD4030_OUT_DATA_MD_(16|24)_DIFF together
- Use iio_chan_spec channel field to avoid maths in several places
- Fix typos and formating
- Link to v1: https://lore.kernel.org/r/20240822-eblanc-ad4630_v1-v1-0-5c68f3327fdd@baylibre.com
---
Esteban Blanc (6):
dt-bindings: iio: adc: add ADI ad4030, ad4630 and ad4632
iio: adc: ad4030: add driver for ad4030-24
iio: adc: ad4030: add averaging support
iio: adc: ad4030: add support for ad4630-24 and ad4630-16
iio: adc: ad4030: add support for ad4632-16 and ad4632-24
docs: iio: ad4030: add documentation
.../devicetree/bindings/iio/adc/adi,ad4030.yaml | 111 ++
Documentation/iio/ad4030.rst | 181 +++
Documentation/iio/index.rst | 1 +
MAINTAINERS | 11 +
drivers/iio/adc/Kconfig | 14 +
drivers/iio/adc/Makefile | 1 +
drivers/iio/adc/ad4030.c | 1233 ++++++++++++++++++++
7 files changed, 1552 insertions(+)
---
base-commit: 40384c840ea1944d7c5a392e8975ed088ecf0b37
change-id: 20240624-eblanc-ad4630_v1-1a074097eb91
Best regards,
--
Esteban Blanc <eblanc@...libre.com>
Powered by blists - more mailing lists