lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-Id: <20241219-ufs-qcom-suspend-fix-v3-0-63c4b95a70b9@linaro.org>
Date: Thu, 19 Dec 2024 22:20:40 +0530
From: Manivannan Sadhasivam via B4 Relay <devnull+manivannan.sadhasivam.linaro.org@...nel.org>
To: Alim Akhtar <alim.akhtar@...sung.com>, 
 Avri Altman <avri.altman@....com>, Bart Van Assche <bvanassche@....org>, 
 "James E.J. Bottomley" <James.Bottomley@...senPartnership.com>, 
 "Martin K. Petersen" <martin.petersen@...cle.com>, 
 Abel Vesa <abel.vesa@...aro.org>, Bjorn Andersson <andersson@...nel.org>, 
 Neil Armstrong <neil.armstrong@...aro.org>, 
 Konrad Dybcio <konradybcio@...nel.org>
Cc: linux-scsi@...r.kernel.org, linux-kernel@...r.kernel.org, 
 linux-arm-msm@...r.kernel.org, Amit Pundir <amit.pundir@...aro.org>, 
 Nitin Rawat <quic_nitirawa@...cinc.com>, 
 Manivannan Sadhasivam <manivannan.sadhasivam@...aro.org>, 
 stable@...r.kernel.org, Ram Kumar Dwivedi <quic_rdwivedi@...cinc.com>
Subject: [PATCH v3 0/4] scsi: ufs: qcom: Suspend fixes

Hi,

This series fixes the several suspend issues on Qcom platforms. Patch 1 fixes
the resume failure with spm_lvl=5 suspend on most of the Qcom platforms. For
this patch, I couldn't figure out the exact commit that caused the issue. So I
used the commit that introduced reinit support as a placeholder.

Patch 4 fixes the suspend issue on SM8550 and SM8650 platforms where UFS
PHY retention is not supported. Hence the default spm_lvl=3 suspend fails. So
this patch configures spm_lvl=5 as the default suspend level to force UFSHC/
device powerdown during suspend. This supersedes the previous series [1] that
tried to fix the issue in clock drivers.

This series is tested on Qcom SM8550 QRD, SM8650 QRD and Qcom RB5 boards.

[1] https://lore.kernel.org/linux-arm-msm/20241107-ufs-clk-fix-v1-0-6032ff22a052@linaro.org

Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@...aro.org>
---
Changes in v3:
- Added a patch that honors the runtime/system PM levels set by host drivers.
  Otherwise patch 4 doesn't have any effect. This was discovered with SM8650
  QRD.
- Collected tags
- Link to v2: https://lore.kernel.org/r/20241213-ufs-qcom-suspend-fix-v2-0-1de6cd2d6146@linaro.org

Changes in v2:
- Changed 'ufs_qcom_drvdata::quirks' type to 'enum ufshcd_quirks'
- Collected tags
- Link to v1: https://lore.kernel.org/r/20241211-ufs-qcom-suspend-fix-v1-0-83ebbde76b1c@linaro.org

---
Manivannan Sadhasivam (4):
      scsi: ufs: qcom: Power off the PHY if it was already powered on in ufs_qcom_power_up_sequence()
      scsi: ufs: core: Honor runtime/system PM levels if set by host controller drivers
      scsi: ufs: qcom: Allow passing platform specific OF data
      scsi: ufs: qcom: Power down the controller/device during system suspend for SM8550/SM8650 SoCs

 drivers/ufs/core/ufshcd-priv.h |  6 ------
 drivers/ufs/core/ufshcd.c      | 10 ++++++----
 drivers/ufs/host/ufs-qcom.c    | 31 +++++++++++++++++++------------
 drivers/ufs/host/ufs-qcom.h    |  5 +++++
 include/ufs/ufshcd.h           |  2 --
 5 files changed, 30 insertions(+), 24 deletions(-)
---
base-commit: 40384c840ea1944d7c5a392e8975ed088ecf0b37
change-id: 20241211-ufs-qcom-suspend-fix-5618e9c56d93

Best regards,
-- 
Manivannan Sadhasivam <manivannan.sadhasivam@...aro.org>



Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ