[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20241219170800.2957-8-jason-jh.lin@mediatek.com>
Date: Fri, 20 Dec 2024 01:08:00 +0800
From: Jason-JH.Lin <jason-jh.lin@...iatek.com>
To: Jassi Brar <jassisinghbrar@...il.com>, Chun-Kuang Hu
<chunkuang.hu@...nel.org>, AngeloGioacchino Del Regno
<angelogioacchino.delregno@...labora.com>, Rob Herring <robh@...nel.org>,
Krzysztof Kozlowski <krzk+dt@...nel.org>, Conor Dooley <conor+dt@...nel.org>,
Matthias Brugger <matthias.bgg@...il.com>, Mauro Carvalho Chehab
<mchehab@...nel.org>
CC: David Airlie <airlied@...il.com>, Simona Vetter <simona@...ll.ch>,
<linux-kernel@...r.kernel.org>, <devicetree@...r.kernel.org>,
<dri-devel@...ts.freedesktop.org>, <linux-mediatek@...ts.infradead.org>,
<linux-arm-kernel@...ts.infradead.org>, <linux-media@...r.kernel.org>,
"Jason-JH . Lin" <jason-jh.lin@...iatek.com>, Singo Chang
<singo.chang@...iatek.com>, Nancy Lin <nancy.lin@...iatek.com>, Moudy Ho
<moudy.ho@...iatek.com>, Xavier Chang <xavier.chang@...iatek.com>,
<Project_Global_Chrome_Upstream_Group@...iatek.com>
Subject: [PATCH v3 7/7] media: mediatek: mdp3: Add programming flow for unsupported subsys ID hardware
To support hardware without subsys IDs on new SoCs, add a programming
flow that checks whether the subsys ID is valid. If the subsys ID is
invalid, the flow will call 2 alternative CMDQ APIs:
cmdq_pkt_assign() and cmdq_pkt_write_s_mask_value() to achieve the
same functionality.
Signed-off-by: Jason-JH.Lin <jason-jh.lin@...iatek.com>
---
.../platform/mediatek/mdp3/mtk-mdp3-cmdq.c | 18 ++++-
.../platform/mediatek/mdp3/mtk-mdp3-comp.h | 79 ++++++++++++++-----
2 files changed, 77 insertions(+), 20 deletions(-)
diff --git a/drivers/media/platform/mediatek/mdp3/mtk-mdp3-cmdq.c b/drivers/media/platform/mediatek/mdp3/mtk-mdp3-cmdq.c
index e5ccf673e152..0ee3354963db 100644
--- a/drivers/media/platform/mediatek/mdp3/mtk-mdp3-cmdq.c
+++ b/drivers/media/platform/mediatek/mdp3/mtk-mdp3-cmdq.c
@@ -321,7 +321,14 @@ static int mdp_path_config_subfrm(struct mdp_cmdq_cmd *cmd,
/* Enable mux settings */
for (index = 0; index < ctrl->num_sets; index++) {
set = &ctrl->sets[index];
- cmdq_pkt_write(&cmd->pkt, set->subsys_id, set->reg, set->value);
+ if (set->subsys_id != CMDQ_SUBSYS_INVALID) {
+ cmdq_pkt_write(&cmd->pkt, set->subsys_id, set->reg, set->value);
+ } else {
+ /* only MMIO access, no need to check mminfro_offset */
+ cmdq_pkt_assign(&cmd->pkt, CMDQ_THR_SPR_IDX0, CMDQ_ADDR_HIGH(set->reg));
+ cmdq_pkt_write_s_value(&cmd->pkt, CMDQ_THR_SPR_IDX0,
+ CMDQ_ADDR_LOW(set->reg), set->value);
+ }
}
/* Config sub-frame information */
for (index = (num_comp - 1); index >= 0; index--) {
@@ -376,7 +383,14 @@ static int mdp_path_config_subfrm(struct mdp_cmdq_cmd *cmd,
/* Disable mux settings */
for (index = 0; index < ctrl->num_sets; index++) {
set = &ctrl->sets[index];
- cmdq_pkt_write(&cmd->pkt, set->subsys_id, set->reg, 0);
+ if (set->subsys_id != CMDQ_SUBSYS_INVALID) {
+ cmdq_pkt_write(&cmd->pkt, set->subsys_id, set->reg, 0);
+ } else {
+ /* only MMIO access, no need to check mminfro_offset */
+ cmdq_pkt_assign(&cmd->pkt, CMDQ_THR_SPR_IDX0, CMDQ_ADDR_HIGH(set->reg));
+ cmdq_pkt_write_s_value(&cmd->pkt, CMDQ_THR_SPR_IDX0,
+ CMDQ_ADDR_LOW(set->reg), 0);
+ }
}
return 0;
diff --git a/drivers/media/platform/mediatek/mdp3/mtk-mdp3-comp.h b/drivers/media/platform/mediatek/mdp3/mtk-mdp3-comp.h
index 681906c16419..e20f9d080db9 100644
--- a/drivers/media/platform/mediatek/mdp3/mtk-mdp3-comp.h
+++ b/drivers/media/platform/mediatek/mdp3/mtk-mdp3-comp.h
@@ -9,17 +9,44 @@
#include "mtk-mdp3-cmdq.h"
-#define MM_REG_WRITE_MASK(cmd, id, base, ofst, val, mask) \
-do { \
- typeof(mask) (m) = (mask); \
- cmdq_pkt_write_mask(&((cmd)->pkt), id, (base) + (ofst), \
- (val), \
- (((m) & (ofst##_MASK)) == (ofst##_MASK)) ? \
- (0xffffffff) : (m)); \
+#define MM_REG_WRITE_MASK(cmd, id, base, ofst, val, mask) \
+do { \
+ typeof(cmd) (_c) = (cmd); \
+ typeof(id) (_i) = (id); \
+ typeof(base) (_b) = (base); \
+ typeof(ofst) (_o) = (ofst); \
+ typeof(val) (_v) = (val); \
+ typeof(mask) (_m) = (mask); \
+ _m = ((_m & (ofst##_MASK)) == (ofst##_MASK)) ? 0xffffffff : _m; \
+ if (_i != CMDQ_SUBSYS_INVALID) { \
+ cmdq_pkt_write_mask(&_c->pkt, _i, _b + _o, _v, _m); \
+ } else { \
+ /* only MMIO access, no need to check mminfro_offset */ \
+ cmdq_pkt_assign(&_c->pkt, CMDQ_THR_SPR_IDX0, \
+ CMDQ_ADDR_HIGH(_b)); \
+ cmdq_pkt_write_s_mask_value(&_c->pkt, CMDQ_THR_SPR_IDX0,\
+ CMDQ_ADDR_LOW(_b + _o), \
+ _v, _m); \
+ } \
} while (0)
-#define MM_REG_WRITE(cmd, id, base, ofst, val) \
- cmdq_pkt_write(&((cmd)->pkt), id, (base) + (ofst), (val))
+#define MM_REG_WRITE(cmd, id, base, ofst, val) \
+do { \
+ typeof(cmd) (_c) = (cmd); \
+ typeof(id) (_i) = (id); \
+ typeof(base) (_b) = (base); \
+ typeof(ofst) (_o) = (ofst); \
+ typeof(val) (_v) = (val); \
+ if (_i != CMDQ_SUBSYS_INVALID) { \
+ cmdq_pkt_write(&_c->pkt, _i, _b + _o, _v); \
+ } else { \
+ /* only MMIO access, no need to check mminfro_offset */ \
+ cmdq_pkt_assign(&_c->pkt, CMDQ_THR_SPR_IDX0, \
+ CMDQ_ADDR_HIGH(_b)); \
+ cmdq_pkt_write_s_value(&_c->pkt, CMDQ_THR_SPR_IDX0, \
+ CMDQ_ADDR_LOW(_b + _o), _v); \
+ } \
+} while (0)
#define MM_REG_WAIT(cmd, evt) \
do { \
@@ -49,17 +76,33 @@ do { \
cmdq_pkt_set_event(&((c)->pkt), (e)); \
} while (0)
-#define MM_REG_POLL_MASK(cmd, id, base, ofst, val, _mask) \
-do { \
- typeof(_mask) (_m) = (_mask); \
- cmdq_pkt_poll_mask(&((cmd)->pkt), id, \
- (base) + (ofst), (val), \
- (((_m) & (ofst##_MASK)) == (ofst##_MASK)) ? \
- (0xffffffff) : (_m)); \
+#define MM_REG_POLL_MASK(cmd, id, base, ofst, val, mask) \
+do { \
+ typeof(cmd) (_c) = (cmd); \
+ typeof(id) (_i) = (id); \
+ typeof(base) (_b) = (base); \
+ typeof(ofst) (_o) = (ofst); \
+ typeof(val) (_v) = (val); \
+ typeof(mask) (_m) = (mask); \
+ _m = ((_m & (ofst##_MASK)) == (ofst##_MASK)) ? 0xffffffff : _m; \
+ if (_i != CMDQ_SUBSYS_INVALID) \
+ cmdq_pkt_poll_mask(&_c->pkt, _i, _b + _o, _v, _m); \
+ else /* POLL not support SPR, so use cmdq_pkt_poll_addr() */ \
+ cmdq_pkt_poll_addr(&_c->pkt, _b + _o, _v, _m); \
} while (0)
-#define MM_REG_POLL(cmd, id, base, ofst, val) \
- cmdq_pkt_poll(&((cmd)->pkt), id, (base) + (ofst), (val))
+#define MM_REG_POLL(cmd, id, base, ofst, val) \
+do { \
+ typeof(cmd) (_c) = (cmd); \
+ typeof(id) (_i) = (id); \
+ typeof(base) (_b) = (base); \
+ typeof(ofst) (_o) = (ofst); \
+ typeof(val) (_v) = (val); \
+ if (_i != CMDQ_SUBSYS_INVALID) \
+ cmdq_pkt_poll(&_c->pkt, _i, _b + _o, _v); \
+ else /* POLL not support SPR, so use cmdq_pkt_poll_addr() */ \
+ cmdq_pkt_poll_addr(&_c->pkt, _b + _o, _v, 0xffffffff); \
+} while (0)
enum mtk_mdp_comp_id {
MDP_COMP_NONE = -1, /* Invalid engine */
--
2.43.0
Powered by blists - more mailing lists