linux-kernel - Re: [PATCH v2 2/2] arm64: dts: imx95-19x19-evk: add ENETC 0 support

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <Z2Rcz9CtXuzQUMko@lizhi-Precision-Tower-5810>
Date: Thu, 19 Dec 2024 12:50:07 -0500
From: Frank Li <Frank.li@....com>
To: Wei Fang <wei.fang@....com>
Cc: robh@...nel.org, krzk+dt@...nel.org, conor+dt@...nel.org,
	shawnguo@...nel.org, s.hauer@...gutronix.de, kernel@...gutronix.de,
	festevam@...il.com, devicetree@...r.kernel.org, imx@...ts.linux.dev,
	linux-arm-kernel@...ts.infradead.org, linux-kernel@...r.kernel.org
Subject: Re: [PATCH v2 2/2] arm64: dts: imx95-19x19-evk: add ENETC 0 support

On Thu, Dec 19, 2024 at 02:13:40PM +0800, Wei Fang wrote:
> Add ENETC 0 (1G ethernet port) support for i.MX95-19x19-EVK board. In
> addition, because all ENETC instances share MDIO bus, so enable EMDIO
> at the same time.
>
> Signed-off-by: Wei Fang <wei.fang@....com>
> ---

Reviewed-by: Frank Li <Frank.Li@....com>

>  .../boot/dts/freescale/imx95-19x19-evk.dts    | 52 +++++++++++++++++++
>  1 file changed, 52 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/freescale/imx95-19x19-evk.dts b/arch/arm64/boot/dts/freescale/imx95-19x19-evk.dts
> index 6086cb7fa5a0..8bc066c3760c 100644
> --- a/arch/arm64/boot/dts/freescale/imx95-19x19-evk.dts
> +++ b/arch/arm64/boot/dts/freescale/imx95-19x19-evk.dts
> @@ -22,6 +22,7 @@ / {
>  	compatible = "fsl,imx95-19x19-evk", "fsl,imx95";
>
>  	aliases {
> +		ethernet0 = &enetc_port0;
>  		gpio0 = &gpio1;
>  		gpio1 = &gpio2;
>  		gpio2 = &gpio3;
> @@ -193,6 +194,14 @@ sound-wm8962 {
>  	};
>  };
>
> +&enetc_port0 {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&pinctrl_enetc0>;
> +	phy-handle = <&ethphy0>;
> +	phy-mode = "rgmii-id";
> +	status = "okay";
> +};
> +
>  &flexspi1 {
>  	pinctrl-names = "default";
>  	pinctrl-0 = <&pinctrl_flexspi1>;
> @@ -338,6 +347,25 @@ &mu7 {
>  	status = "okay";
>  };
>
> +&netcmix_blk_ctrl {
> +	status = "okay";
> +};
> +
> +&netc_blk_ctrl {
> +	status = "okay";
> +};
> +
> +&netc_emdio {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&pinctrl_emdio>;
> +	status = "okay";
> +
> +	ethphy0: ethernet-phy@1 {
> +		reg = <1>;
> +		realtek,clkout-disable;
> +	};
> +};
> +
>  &pcie0 {
>  	pinctrl-0 = <&pinctrl_pcie0>;
>  	pinctrl-names = "default";
> @@ -429,6 +457,30 @@ &wdog3 {
>  };
>
>  &scmi_iomuxc {
> +	pinctrl_emdio: emdiogrp{
> +		fsl,pins = <
> +			IMX95_PAD_ENET1_MDC__NETCMIX_TOP_NETC_MDC		0x57e
> +			IMX95_PAD_ENET1_MDIO__NETCMIX_TOP_NETC_MDIO		0x97e
> +		>;
> +	};
> +
> +	pinctrl_enetc0: enetc0grp {
> +		fsl,pins = <
> +			IMX95_PAD_ENET1_TD3__NETCMIX_TOP_ETH0_RGMII_TD3		0x57e
> +			IMX95_PAD_ENET1_TD2__NETCMIX_TOP_ETH0_RGMII_TD2		0x57e
> +			IMX95_PAD_ENET1_TD1__NETCMIX_TOP_ETH0_RGMII_TD1		0x57e
> +			IMX95_PAD_ENET1_TD0__NETCMIX_TOP_ETH0_RGMII_TD0		0x57e
> +			IMX95_PAD_ENET1_TX_CTL__NETCMIX_TOP_ETH0_RGMII_TX_CTL	0x57e
> +			IMX95_PAD_ENET1_TXC__NETCMIX_TOP_ETH0_RGMII_TX_CLK	0x58e
> +			IMX95_PAD_ENET1_RX_CTL__NETCMIX_TOP_ETH0_RGMII_RX_CTL	0x57e
> +			IMX95_PAD_ENET1_RXC__NETCMIX_TOP_ETH0_RGMII_RX_CLK	0x58e
> +			IMX95_PAD_ENET1_RD0__NETCMIX_TOP_ETH0_RGMII_RD0		0x57e
> +			IMX95_PAD_ENET1_RD1__NETCMIX_TOP_ETH0_RGMII_RD1		0x57e
> +			IMX95_PAD_ENET1_RD2__NETCMIX_TOP_ETH0_RGMII_RD2		0x57e
> +			IMX95_PAD_ENET1_RD3__NETCMIX_TOP_ETH0_RGMII_RD3		0x57e
> +		>;
> +	};
> +
>  	pinctrl_flexspi1: flexspi1grp {
>  		fsl,pins = <
>  			IMX95_PAD_XSPI1_SS0_B__FLEXSPI1_A_SS0_B			0x3fe
> --
> 2.34.1
>