[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20241219-imx8m-clk-v1-5-cfaffa087da6@pengutronix.de>
Date: Thu, 19 Dec 2024 08:27:36 +0100
From: Ahmad Fatoum <a.fatoum@...gutronix.de>
To: Abel Vesa <abelvesa@...nel.org>, Peng Fan <peng.fan@....com>,
Michael Turquette <mturquette@...libre.com>,
Stephen Boyd <sboyd@...nel.org>, Rob Herring <robh@...nel.org>,
Krzysztof Kozlowski <krzk+dt@...nel.org>,
Conor Dooley <conor+dt@...nel.org>, Shawn Guo <shawnguo@...nel.org>,
Sascha Hauer <s.hauer@...gutronix.de>,
Pengutronix Kernel Team <kernel@...gutronix.de>,
Fabio Estevam <festevam@...il.com>, Abel Vesa <abel.vesa@...aro.org>,
Marek Vasut <marex@...x.de>
Cc: linux-clk@...r.kernel.org, imx@...ts.linux.dev,
devicetree@...r.kernel.org, linux-arm-kernel@...ts.infradead.org,
linux-kernel@...r.kernel.org, Ahmad Fatoum <a.fatoum@...gutronix.de>
Subject: [PATCH 5/6] arm64: dts: freescale: imx8mp-skov: operate SoC in
nominal mode
To reduce heat generation, the Skov i.MX8MP boards should run in nominal
drive mode with a VDD_SOC voltage of 850 mV.
At this operating point, not all frequencies that are achievable with
overdrive mode are possible, so import imx8mp-nominal.dtsi to clock down
the clocks.
Signed-off-by: Ahmad Fatoum <a.fatoum@...gutronix.de>
---
arch/arm64/boot/dts/freescale/imx8mp-skov-reva.dtsi | 5 +++--
1 file changed, 3 insertions(+), 2 deletions(-)
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-skov-reva.dtsi b/arch/arm64/boot/dts/freescale/imx8mp-skov-reva.dtsi
index 59813ef8e2bb..9dc36517e90c 100644
--- a/arch/arm64/boot/dts/freescale/imx8mp-skov-reva.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mp-skov-reva.dtsi
@@ -1,6 +1,7 @@
// SPDX-License-Identifier: (GPL-2.0 OR MIT)
#include "imx8mp.dtsi"
+#include "imx8mp-nominal.dtsi"
#include <dt-bindings/leds/common.h>
@@ -237,8 +238,8 @@ pmic@25 {
regulators {
reg_vdd_soc: BUCK1 {
regulator-name = "VDD_SOC";
- regulator-min-microvolt = <600000>;
- regulator-max-microvolt = <2187500>;
+ regulator-min-microvolt = <850000>;
+ regulator-max-microvolt = <850000>;
vin-supply = <®_5v_p>;
regulator-boot-on;
regulator-always-on;
--
2.39.5
Powered by blists - more mailing lists