[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20241219-sm8650-v6-13-hmd-deckard-mdss-quad-upstream-32-v3-14-92c7c0a228e3@linaro.org>
Date: Thu, 19 Dec 2024 15:49:32 +0800
From: Jun Nie <jun.nie@...aro.org>
To: Rob Clark <robdclark@...il.com>,
Abhinav Kumar <quic_abhinavk@...cinc.com>,
Dmitry Baryshkov <dmitry.baryshkov@...aro.org>, Sean Paul <sean@...rly.run>,
Marijn Suijten <marijn.suijten@...ainline.org>,
David Airlie <airlied@...il.com>, Simona Vetter <simona@...ll.ch>
Cc: linux-arm-msm@...r.kernel.org, dri-devel@...ts.freedesktop.org,
freedreno@...ts.freedesktop.org, linux-kernel@...r.kernel.org,
Jun Nie <jun.nie@...aro.org>
Subject: [PATCH v3 14/15] drm/msm/dpu: support SSPP assignment for
quad-pipe case
Support SSPP assignment for quad-pipe case with unified method.
The first 2 pipes can share a set of mixer config and enable
multi-rect mode if condition is met. It is also the case for
the later 2 pipes.
Signed-off-by: Jun Nie <jun.nie@...aro.org>
---
drivers/gpu/drm/msm/disp/dpu1/dpu_plane.c | 67 ++++++++++++++++++-------------
1 file changed, 38 insertions(+), 29 deletions(-)
diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_plane.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_plane.c
index 1cd98892898a4..57ccb73c45683 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/dpu_plane.c
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_plane.c
@@ -1163,12 +1163,9 @@ static int dpu_plane_virtual_assign_resources(struct drm_crtc *crtc,
struct dpu_kms *dpu_kms = _dpu_plane_get_kms(plane);
struct dpu_rm_sspp_requirements reqs;
struct dpu_plane_state *pstate;
- struct dpu_sw_pipe *pipe;
- struct dpu_sw_pipe *r_pipe;
- struct dpu_sw_pipe_cfg *pipe_cfg;
- struct dpu_sw_pipe_cfg *r_pipe_cfg;
+ struct dpu_plane *pdpu = to_dpu_plane(plane);
const struct msm_format *fmt;
- int i;
+ int i, num_lm, stage_id, num_stages;
if (plane_state->crtc)
crtc_state = drm_atomic_get_new_crtc_state(state,
@@ -1176,12 +1173,6 @@ static int dpu_plane_virtual_assign_resources(struct drm_crtc *crtc,
pstate = to_dpu_plane_state(plane_state);
- /* TODO: loop below code for another pair later */
- pipe = &pstate->pipe[0];
- r_pipe = &pstate->pipe[1];
- pipe_cfg = &pstate->pipe_cfg[0];
- r_pipe_cfg = &pstate->pipe_cfg[1];
-
for (i = 0; i < PIPES_PER_PLANE; i++)
pstate->pipe[i].sspp = NULL;
@@ -1195,24 +1186,42 @@ static int dpu_plane_virtual_assign_resources(struct drm_crtc *crtc,
reqs.rot90 = drm_rotation_90_or_270(plane_state->rotation);
- pipe->sspp = dpu_rm_reserve_sspp(&dpu_kms->rm, global_state, crtc, &reqs);
- if (!pipe->sspp)
- return -ENODEV;
-
- if (!dpu_plane_try_multirect_parallel(pipe, pipe_cfg, r_pipe, r_pipe_cfg,
- pipe->sspp,
- msm_framebuffer_format(plane_state->fb),
- dpu_kms->catalog->caps->max_linewidth)) {
- /* multirect is not possible, use two SSPP blocks */
- r_pipe->sspp = dpu_rm_reserve_sspp(&dpu_kms->rm, global_state, crtc, &reqs);
- if (!r_pipe->sspp)
- return -ENODEV;
-
- pipe->multirect_index = DPU_SSPP_RECT_SOLO;
- pipe->multirect_mode = DPU_SSPP_MULTIRECT_NONE;
-
- r_pipe->multirect_index = DPU_SSPP_RECT_SOLO;
- r_pipe->multirect_mode = DPU_SSPP_MULTIRECT_NONE;
+ num_lm = dpu_crtc_get_num_lm(crtc_state);
+ num_stages = (num_lm + 1) / 2;
+ for (stage_id = 0; stage_id < num_stages; stage_id++) {
+ for (i = stage_id * PIPES_PER_STAGE; i < (stage_id + 1) * PIPES_PER_STAGE; i++) {
+ struct dpu_sw_pipe *pipe = &pstate->pipe[i];
+ struct dpu_sw_pipe *r_pipe = &pstate->pipe[i + 1];
+ struct dpu_sw_pipe_cfg *pipe_cfg = &pstate->pipe_cfg[i];
+ struct dpu_sw_pipe_cfg *r_pipe_cfg = &pstate->pipe_cfg[i + 1];
+
+ if (!pipe_cfg->valid)
+ break;
+
+ pipe->sspp = dpu_rm_reserve_sspp(&dpu_kms->rm, global_state, crtc, &reqs);
+ if (!pipe->sspp)
+ return -ENODEV;
+
+ /*
+ * If current pipe is the first pipe in pipe pair, check
+ * multi-rect opportunity for the 2nd pipe in the pair.
+ * SSPP multi-rect mode cross mixer pairs is not supported.
+ */
+ if ((i % PIPES_PER_STAGE == 0) &&
+ r_pipe_cfg->valid &&
+ !dpu_plane_try_multirect_parallel(pipe, pipe_cfg, r_pipe, r_pipe_cfg,
+ pipe->sspp,
+ msm_framebuffer_format(plane_state->fb),
+ dpu_kms->catalog->caps->max_linewidth)) {
+ i++;
+ } else {
+ /* multirect is not possible, use two SSPP blocks */
+ pipe->multirect_index = DPU_SSPP_RECT_SOLO;
+ pipe->multirect_mode = DPU_SSPP_MULTIRECT_NONE;
+ DPU_DEBUG_PLANE(pdpu, "allocating sspp_%d for pipe %d.\n",
+ pipe->sspp->idx - SSPP_NONE, i);
+ }
+ }
}
return dpu_plane_atomic_check_sspp(plane, state, crtc_state);
--
2.34.1
Powered by blists - more mailing lists