| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <907b470c-3b24-41ba-9b6d-c07caa30ee00@gmail.com>
Date: Thu, 19 Dec 2024 11:19:46 +0100
From: Dirk Behme <dirk.behme@...il.com>
To: Fabien Parent <parent.f@...il.com>, Rob Herring <robh@...nel.org>,
Saravana Kannan <saravanak@...gle.com>, Miguel Ojeda <ojeda@...nel.org>,
Alex Gaynor <alex.gaynor@...il.com>, Boqun Feng <boqun.feng@...il.com>,
Gary Guo <gary@...yguo.net>, Björn Roy Baron
<bjorn3_gh@...tonmail.com>, Benno Lossin <benno.lossin@...ton.me>,
Andreas Hindborg <a.hindborg@...nel.org>, Alice Ryhl <aliceryhl@...gle.com>,
Trevor Gross <tmgross@...ch.edu>,
Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
"Rafael J. Wysocki" <rafael@...nel.org>,
Wolfram Sang <wsa+renesas@...g-engineering.com>,
Mark Brown <broonie@...nel.org>, Liam Girdwood <lgirdwood@...il.com>,
Krzysztof Kozlowski <krzk+dt@...nel.org>, Conor Dooley
<conor+dt@...nel.org>, Bjorn Andersson <andersson@...nel.org>,
Konrad Dybcio <konradybcio@...nel.org>
Cc: devicetree@...r.kernel.org, rust-for-linux@...r.kernel.org,
linux-kernel@...r.kernel.org, linux-i2c@...r.kernel.org,
linux-arm-msm@...r.kernel.org, vinod.koul@...aro.org,
Fabien Parent <fabien.parent@...aro.org>
Subject: Re: [PATCH 8/9] regulator: add driver for ncv6336 regulator
Hi Fabien,
you might have noticed that I'm using your development branches of
this since some time. So sending these patches for review is a big
step! Many thanks!
Just one topic to check below:
On 19.12.24 00:36, Fabien Parent wrote:
> From: Fabien Parent <fabien.parent@...aro.org>
>
> This commit adds support for the Onsemi NCV6336 buck down converter.
>
> Signed-off-by: Fabien Parent <fabien.parent@...aro.org>
> ---
> drivers/regulator/Kconfig | 7 +
> drivers/regulator/Makefile | 1 +
> drivers/regulator/ncv6336_regulator.rs | 241 +++++++++++++++++++++++++++++++++
> 3 files changed, 249 insertions(+)
>
> diff --git a/drivers/regulator/Kconfig b/drivers/regulator/Kconfig
> index 39297f7d8177193e51c99bc2b360c6d9936e62fe..7254a6e1d7539b147b7ba00ebcb6fd92eb6b2616 100644
> --- a/drivers/regulator/Kconfig
> +++ b/drivers/regulator/Kconfig
> @@ -952,6 +952,13 @@ config REGULATOR_MTK_DVFSRC
> of Mediatek. It allows for voting on regulator state
> between multiple users.
>
> +config REGULATOR_NCV6336
> + tristate "Onsemi NCV6336 regulator driver"
> + depends on RUST && OF && I2C=y
> + select REGMAP_I2C
> + help
> + Say y here to support the Onsemi NCV6336 buck converter.
> +
> config REGULATOR_PALMAS
> tristate "TI Palmas PMIC Regulators"
> depends on MFD_PALMAS
> diff --git a/drivers/regulator/Makefile b/drivers/regulator/Makefile
> index 3d5a803dce8a0556ba9557fa069c6e37593b3c69..0309a78b820cc85883c0c129801ab713e08e4391 100644
> --- a/drivers/regulator/Makefile
> +++ b/drivers/regulator/Makefile
> @@ -113,6 +113,7 @@ obj-$(CONFIG_REGULATOR_MT6370) += mt6370-regulator.o
> obj-$(CONFIG_REGULATOR_MT6380) += mt6380-regulator.o
> obj-$(CONFIG_REGULATOR_MT6397) += mt6397-regulator.o
> obj-$(CONFIG_REGULATOR_MTK_DVFSRC) += mtk-dvfsrc-regulator.o
> +obj-$(CONFIG_REGULATOR_NCV6336) += ncv6336_regulator.o
> obj-$(CONFIG_REGULATOR_QCOM_LABIBB) += qcom-labibb-regulator.o
> obj-$(CONFIG_REGULATOR_QCOM_PM8008) += qcom-pm8008-regulator.o
> obj-$(CONFIG_REGULATOR_QCOM_REFGEN) += qcom-refgen-regulator.o
> diff --git a/drivers/regulator/ncv6336_regulator.rs b/drivers/regulator/ncv6336_regulator.rs
> new file mode 100644
> index 0000000000000000000000000000000000000000..7efd7630792b68fb353ed1b1634980def9e326a1
> --- /dev/null
> +++ b/drivers/regulator/ncv6336_regulator.rs
> @@ -0,0 +1,241 @@
> +// SPDX-License-Identifier: GPL-2.0
> +
> +//! Driver for the Onsemi Buck Converter NCV6336
> +//!
> +//! Datasheet: https://www.onsemi.com/pdf/datasheet/ncv6336bm-d.pdf
> +
> +use kernel::{
> + c_str, i2c, of,
> + prelude::*,
> + regmap::{self, BitFieldReadOps, BitFieldWriteOps, RawFieldWriteOps},
> + regulator::{
> + driver::{Config, Desc, Device, Driver, RegmapHelpers, Status, Type},
> + Mode,
> + },
> + sync::{new_mutex, Arc, Mutex},
> +};
> +use register::*;
> +
> +kernel::module_i2c_driver! {
> + type: Ncv6336,
> + name: "ncv6336",
> + author: "Fabien Parent <fabien.parent@...aro.org>",
> + license: "GPL",
> +}
> +
> +kernel::i2c_device_table!(
> + I2C_ID_TABLE,
> + MODULE_I2C_ID_TABLE,
> + <Ncv6336 as i2c::Driver>::IdInfo,
> + [(i2c::DeviceId::new(c_str!("ncv6336")), ()),]
> +);
> +
> +kernel::of_device_table!(
> + OF_ID_TABLE,
> + MODULE_OF_ID_TABLE,
> + <Ncv6336 as i2c::Driver>::IdInfo,
> + [(of::DeviceId::new(c_str!("onnn,ncv6336")), ()),]
> +);
> +
> +regmap::define_regmap_field_descs!(FIELD_DESCS, {
> + (pid, 0x3, READ, { value => raw([7:0], ro) }),
> + (rid, 0x4, READ, { value => raw([7:0], ro) }),
> + (fid, 0x5, READ, { value => raw([7:0], ro) }),
> + (progvsel1, 0x10, RW, {
> + voutvsel1 => raw([6:0], rw),
> + envsel1 => bit(7, rw),
> + }),
> + (progvsel0, 0x11, RW, {
> + voutvsel0 => raw([6:0], rw),
> + envsel0 => bit(7, rw),
> + }),
> + (pgood, 0x12, RW, { dischg => bit(4, rw) }),
> + (command, 0x14, RW, {
> + vselgt => bit(0, rw),
> + pwmvsel1 => bit(6, rw),
> + pwmvsel0 => bit(7, rw),
> + }),
> + (limconf, 0x16, RW, {
> + rearm => bit(0, rw),
> + rststatus => bit(1, rw),
> + tpwth => enum([5:4], rw, {
> + Temp83C = 0x0,
> + Temp94C = 0x1,
> + Temp105C = 0x2,
> + Temp116C = 0x3,
> + }),
> + ipeak => enum([7:6], rw, {
> + Peak3p5A = 0x0,
> + Peak4p0A = 0x1,
> + Peak4p5A = 0x2,
> + Peak5p0A = 0x3,
Could you check to read from or write to the tpwth or ipeak (enum)
above? I've been under the impression that for that Desc & enum need
to Copy & Clone [1]?
[1]
diff --git a/rust/kernel/regmap.rs b/rust/kernel/regmap.rs
index 232fe93df769..d1baf182f53c 100644
--- a/rust/kernel/regmap.rs
+++ b/rust/kernel/regmap.rs
@@ -623,6 +623,7 @@ macro_rules! regmap_field_enum {
kernel::macros::paste! {
#[repr(u32)]
#[allow(non_camel_case_types)]
+ #[derive(Copy, Clone)]
pub(crate) enum [<$field_name _enum>] {
$($k = $v,)+
}
diff --git a/rust/kernel/regulator/driver.rs
b/rust/kernel/regulator/driver.rs
index e79e93122b09..0b6819e46686 100644
--- a/rust/kernel/regulator/driver.rs
+++ b/rust/kernel/regulator/driver.rs
@@ -256,6 +256,7 @@ fn set_suspend_mode(_rdev: &mut
Device<Self::Data>, _mode: Mode) -> Result {
/// # Invariants
///
/// `self.0` has always valid data.
+#[derive(Copy, Clone)]
pub struct Desc(bindings::regulator_desc);
impl Desc {
/// Create a new [`Device`] descriptor
> +static NCV6336_DESC: Desc = Desc::new::<Ncv6336>(c_str!("ncv6336"), Type::Voltage)
> + .with_owner(&THIS_MODULE)
> + .with_of_match(c_str!("buck"))
> + .with_active_discharge(
> + pgood::addr(),
> + pgood::dischg::mask(),
> + pgood::dischg::mask(),
> + 0,
> + )
> + .with_csel(
> + limconf::addr(),
> + limconf::ipeak::mask(),
> + &[3_500_000, 4_000_000, 4_500_000, 5_000_000],
> + )
> + .with_enable(
> + progvsel0::addr(),
> + progvsel0::envsel0::mask(),
> + progvsel0::envsel0::mask(),
> + 0,
> + )
> + .with_linear_mapping(
> + progvsel0::addr(),
> + progvsel0::voutvsel0::mask(),
> + 600_000,
> + 6250,
> + 128,
> + 0,
> + );
> +
> +struct Ncv6336RegulatorData {
> + fields: regmap::Fields<{ FIELD_DESCS.len() }>,
> +}
> +
> +struct Ncv6336(#[expect(dead_code)] Device<<Self as Driver>::Data>);
> +
> +impl i2c::Driver for Ncv6336 {
> + type IdInfo = ();
> +
> + const I2C_ID_TABLE: Option<i2c::IdTable<Self::IdInfo>> = Some(&I2C_ID_TABLE);
> + const OF_ID_TABLE: Option<of::IdTable<Self::IdInfo>> = Some(&OF_ID_TABLE);
> +
> + fn probe(client: &mut i2c::Client, _id_info: Option<&Self::IdInfo>) -> Result<Pin<KBox<Self>>> {
> + let config = regmap::Config::<AccessOps>::new(8, 8)
> + .with_max_register(0x16)
> + .with_cache_type(regmap::CacheType::RbTree);
> + let regmap = Arc::new(regmap::Regmap::init_i2c(client, &config)?, GFP_KERNEL)?;
> + let fields = regmap::Fields::new(®map, &FIELD_DESCS)?;
> +
> + let data = Arc::pin_init(new_mutex!(Ncv6336RegulatorData { fields }), GFP_KERNEL)?;
> + let config = Config::new(client.as_ref(), data.clone()).with_regmap(regmap.clone());
> + let regulator = Device::register(client.as_ref(), &NCV6336_DESC, config)?;
> +
> + let drvdata = KBox::new(Self(regulator), GFP_KERNEL)?;
> +
> + Ok(drvdata.into())
> + }
> +}
> +
> +#[vtable]
> +impl Driver for Ncv6336 {
> + type Data = Arc<Mutex<Ncv6336RegulatorData>>;
> +
> + fn list_voltage(reg: &mut Device<Self::Data>, selector: u32) -> Result<i32> {
> + reg.list_voltage_linear(selector)
> + }
> +
> + fn enable(reg: &mut Device<Self::Data>) -> Result {
> + reg.enable_regmap()
> + }
> +
> + fn disable(reg: &mut Device<Self::Data>) -> Result {
> + reg.disable_regmap()
> + }
> +
> + fn is_enabled(reg: &mut Device<Self::Data>) -> Result<bool> {
> + reg.is_enabled_regmap()
> + }
> +
> + fn set_active_discharge(reg: &mut Device<Self::Data>, enable: bool) -> Result {
> + reg.set_active_discharge_regmap(enable)
> + }
> +
> + fn set_current_limit(reg: &mut Device<Self::Data>, min_ua: i32, max_ua: i32) -> Result {
> + reg.set_current_limit_regmap(min_ua, max_ua)
> + }
> +
> + fn get_current_limit(reg: &mut Device<Self::Data>) -> Result<i32> {
> + reg.get_current_limit_regmap()
> + }
> +
> + fn set_voltage_sel(reg: &mut Device<Self::Data>, selector: u32) -> Result {
> + reg.set_voltage_sel_regmap(selector)
> + }
> +
> + fn get_voltage_sel(reg: &mut Device<Self::Data>) -> Result<i32> {
> + reg.get_voltage_sel_regmap()
> + }
> +
> + fn set_mode(reg: &mut Device<Self::Data>, mode: Mode) -> Result {
> + let data = reg.data();
> + let fields = &mut data.lock().fields;
> +
> + match mode {
> + Mode::Normal => command::pwmvsel0::clear(fields),
> + Mode::Fast => command::pwmvsel0::set(fields),
> + _ => Err(ENOTSUPP),
> + }
> + }
> +
> + fn get_mode(reg: &mut Device<Self::Data>) -> Mode {
> + let data = reg.data();
> + let fields = &mut data.lock().fields;
> +
> + match command::pwmvsel0::is_set(fields) {
> + Ok(true) => Mode::Fast,
> + Ok(false) => Mode::Normal,
> + Err(_) => Mode::Invalid,
> + }
> + }
> +
> + fn get_status(reg: &mut Device<Self::Data>) -> Result<Status> {
> + if !Self::is_enabled(reg)? {
> + return Ok(Status::Off);
> + }
> +
> + Ok(Self::get_mode(reg).into())
> + }
> +
> + fn set_suspend_voltage(reg: &mut Device<Self::Data>, uv: i32) -> Result {
> + let data = reg.data();
> + let fields = &mut data.lock().fields;
> +
> + let quot = (uv - 600000) / 6250;
> + let rem = (uv - 600000) % 6250;
> + let selector = if rem > 0 { quot + 1 } else { quot };
> +
> + progvsel1::voutvsel1::write(fields, selector as _)
> + }
> +
> + fn set_suspend_enable(reg: &mut Device<Self::Data>) -> Result {
> + let data = reg.data();
> + let fields = &mut data.lock().fields;
> +
> + progvsel1::envsel1::set(fields)?;
> + command::vselgt::clear(fields)
> + }
> +
> + fn set_suspend_disable(reg: &mut Device<Self::Data>) -> Result {
> + let data = reg.data();
> + let fields = &mut data.lock().fields;
> +
> + progvsel1::envsel1::clear(fields)?;
> + command::vselgt::set(fields)
> + }
> +
> + fn set_suspend_mode(reg: &mut Device<Self::Data>, mode: Mode) -> Result {
> + let data = reg.data();
> + let fields = &mut data.lock().fields;
> +
> + match mode {
> + Mode::Normal => command::pwmvsel1::clear(fields),
> + Mode::Fast => command::pwmvsel1::set(fields),
> + _ => Err(ENOTSUPP),
> + }
> + }
> +}
>
Powered by blists - more mailing lists