[<prev] [next>] [<thread-prev] [day] [month] [year] [list]
Message-Id: <20241220-imx-se-if-v11-3-0c7e65d7ae7b@nxp.com>
Date: Fri, 20 Dec 2024 00:27:24 +0530
From: Pankaj Gupta <pankaj.gupta@....com>
To: Jonathan Corbet <corbet@....net>, Rob Herring <robh@...nel.org>,
Krzysztof Kozlowski <krzk+dt@...nel.org>,
Conor Dooley <conor+dt@...nel.org>, Shawn Guo <shawnguo@...nel.org>,
Sascha Hauer <s.hauer@...gutronix.de>,
Pengutronix Kernel Team <kernel@...gutronix.de>,
Fabio Estevam <festevam@...il.com>, Pankaj Gupta <pankaj.gupta@....com>
Cc: linux-doc@...r.kernel.org, linux-kernel@...r.kernel.org,
devicetree@...r.kernel.org, imx@...ts.linux.dev,
linux-arm-kernel@...ts.infradead.org
Subject: [PATCH v11 3/5] arm64: dts: imx8ulp-evk: add nxp secure enclave
firmware
Add support for NXP secure enclave called EdgeLock Enclave
firmware (se-fw) for imx8ulp-evk.
EdgeLock Enclave has a hardware limitation of restricted access to DDR
address: 0x80000000 to 0xAFFFFFFF, so reserve 1MB of DDR memory region
from 0x80000000.
Signed-off-by: Pankaj Gupta <pankaj.gupta@....com>
---
arch/arm64/boot/dts/freescale/imx8ulp-evk.dts | 17 ++++++++++++++++-
arch/arm64/boot/dts/freescale/imx8ulp.dtsi | 13 +++++++++++--
2 files changed, 27 insertions(+), 3 deletions(-)
diff --git a/arch/arm64/boot/dts/freescale/imx8ulp-evk.dts b/arch/arm64/boot/dts/freescale/imx8ulp-evk.dts
index e937e5f8fa8b..f5963f4043c4 100644
--- a/arch/arm64/boot/dts/freescale/imx8ulp-evk.dts
+++ b/arch/arm64/boot/dts/freescale/imx8ulp-evk.dts
@@ -1,6 +1,6 @@
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
/*
- * Copyright 2021 NXP
+ * Copyright 2021, 2024 NXP
*/
/dts-v1/;
@@ -19,6 +19,17 @@ memory@...00000 {
device_type = "memory";
reg = <0x0 0x80000000 0 0x80000000>;
};
+ reserved-memory {
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ ele_reserved: ele-reserved@...00000 {
+ compatible = "shared-dma-pool";
+ reg = <0 0x90000000 0 0x100000>;
+ no-map;
+ };
+ };
reserved-memory {
#address-cells = <2>;
@@ -204,6 +215,10 @@ &usdhc0 {
status = "okay";
};
+&ele_if0 {
+ memory-region = <&ele_reserved>;
+};
+
&fec {
pinctrl-names = "default", "sleep";
pinctrl-0 = <&pinctrl_enet>;
diff --git a/arch/arm64/boot/dts/freescale/imx8ulp.dtsi b/arch/arm64/boot/dts/freescale/imx8ulp.dtsi
index e32d5afcf4a9..f98629b7f4cc 100644
--- a/arch/arm64/boot/dts/freescale/imx8ulp.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8ulp.dtsi
@@ -1,6 +1,6 @@
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
/*
- * Copyright 2021 NXP
+ * Copyright 2021, 2024 NXP
*/
#include <dt-bindings/clock/imx8ulp-clock.h>
@@ -152,7 +152,7 @@ sosc: clock-sosc {
#clock-cells = <0>;
};
- sram@...1f000 {
+ sram0: sram@...1f000 {
compatible = "mmio-sram";
reg = <0x0 0x2201f000 0x0 0x1000>;
@@ -167,6 +167,8 @@ scmi_buf: scmi-sram-section@0 {
};
firmware {
+ #address-cells = <1>;
+ #size-cells = <0>;
scmi {
compatible = "arm,scmi-smc";
arm,smc-id = <0xc20000fe>;
@@ -184,6 +186,13 @@ scmi_sensor: protocol@15 {
#thermal-sensor-cells = <1>;
};
};
+
+ ele_if0: secure-enclave {
+ compatible = "fsl,imx8ulp-se";
+ mbox-names = "tx", "rx";
+ mboxes = <&s4muap 0 0>, <&s4muap 1 0>;
+ sram = <&sram0>;
+ };
};
cm33: remoteproc-cm33 {
--
2.34.1
Powered by blists - more mailing lists